A theoretical study of five nitrates: Electronic structure and bond dissociation energies

Three density-functional methods (B3P86, B3PW91, and B3LYP) are employed to investigate the O–NO₂ bond lengths, frontier orbital energies, and O–NO₂ bond dissociation energies (BDEs) of n-propyl nitrate (NPN), isopropyl nitrate (IPN), 2-ethylhexyl nitrate (EHN), triethylene glycol dinitrate (Tri-EGDN), and tetraethylene glycol dinitrate (Tetra-EGDN). It is found that the O–NO₂ bond lengthens (destabilizes) in the order of IPN, NPN, EHN, Tetra-EGDN, and Tri-EGDN. From the data of frontier orbital energies (E_HOMO, E_LUMO), and energy gaps (ΔE), we estimate the relative thermal stability ordering of five nitrates and their corresponding radicals. The predicted BDEs of O–NO₂ bond in NPN, IPN, EHN, Tri-EGDN, and Tetra-EGDN, are 176.6, 174.5, 168.1, 156.1, and 159.3 kJ mol⁻¹, respectively. Based on the finding that the present results of BDEs are well coincident with the experimental results of apparent activation energies from the literature, we can draw a conclusion that the experimental thermolysis of five nitrates is only unimolecular homolytical cleavage of the O–NO₂ bonds.     

Adsorptive stripping measurements of germanium(IV) in the presence of pyrogallol

The adsorptive stripping voltammetric determination of germanium(IV) based on the adsorptive accumulation of the germanium(IV)-pyrogallol complex on a hanging mercury drop electrode is reported. The reduction current of the adsorbed germanium complex is measured by differential-pulse cathodic stripping voltammetry. The peak potential is at -0.42 V vs. Ag AgCl (saturated KCL). The effects of various parameters (ligand concentration, supporting electrolytic composition and concentration, accumulation potential and collection time) on the response are discussed. With controlled accumulation for 3 min, the detection limit is 1.2 x 10(-9) M germanium. The relative standard deviation (at 1.2 x 10(-8) M germanium) is 3.6%. Possible interferences are evaluated. The applicability of the method to the determination of germanium(IV) in ore samples was also successfully carried out.     

盐类对4-氯-4′-羟基二苯砜钾盐真空熔融聚合的影响

聚苯砜醚是一种综合性能比较好、可在180℃长期使用的热塑性工程塑料,在国内外受到一定的重视。我们与武汉化工原料厂协作,对4-氯-4′-羟基二苯砜钾盐真空熔融缩聚合成聚苯砜醚的途径进行过一些探索,得到了较好的结果。但是,在实践中发现,由于这一反应速度快,放出的热量大而集中,在真空中聚合热不易导出,随着单体用量     

Biosorption of americium-241 by Saccharomyces cerevisiae

The biosorption of radionuclide ²⁴¹Am from solution by Saccharomyces cerevisiae (S. cerevisiae), and the effects of experimental conditions on the adsorption were investigated. The preliminary results showed thatS. cerevisiae is a very efficient biosorbent. An average of more than 99% of the total ²⁴¹Am could be removed by S. cerevisiae of 2.1 g/l (dry weight) from ²⁴¹Am solutions of 17.54–4386.0 mg/l (2.22 MBq/l–555 MBq/l) with adsorption capacities of 7.45–1880.0 mg/g biomass (dry weight) (0.94 MBq/g–237.9 MBq/g). The adsorption equilibrium was achieved within 1 hour and the optimum pH ranged 1–3. No significant differences on ²⁴¹Am adsorption were observed at 10–45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above ²⁴¹Am concentration. The relationship between concentrations and adsorption capacities of ²⁴¹Am indicated the biosorption process should be described by the Freundlich adsorption isotherm.     

Stacking due to ionic transport number mismatch during sample sweeping on microchips

Sample stacking can occur in isoconductive buffer systems as a result of ion transport mismatches that cause changes in buffer conductivity during electrophoresis. Fluorescence imaging was used to examine this effect in the sweeping of hydrophobic dyes with sodium dodecyl sulfate (SDS) on microchips. Imaging revealed the occurrence of a stacking effect in a sodium borate buffer system in which the sample buffer and SDS-containing run buffer had the same initial conductivity. Injected sample plugs were first swept by SDS micelles and the swept band was then stacked at the trailing end of the sample zone. This effect is due to changes in conductivity at both the front and back interfaces of the injected sample plug and can be modeled by moving boundary equations. Maximum signal enhancements of 86-, 160- and 560-fold were obtained for Rhodamine 560, Rhodamine B and Rhodamine 6G, respectively, by the combination of sweeping and stacking within a 1 cm section of microchannel. Based on sample sweeping/stacking and manipulation of the electric field polarity, a method of trapping and concentrating analyte from multiple injections was also demonstrated.     

有机硅及其改性聚合物膜用于有机溶剂水溶液的渗透汽化分离

采用室温固化硅橡胶及其它三种改性硅氧烷聚合物制成渗透汽化膜,分离丙酮(A),丁酮(B)、乙醇(E)及异丙醇(P)等有机物的水溶液。结果表明,随着透过温度提高、透量成指数关系增大,但对分离系数影响甚小。透量大小顺序为A>B>E>P,分离系数大小顺序为A>B>P>E,当膜材料中(CH_3)_2SiO链节含量由70%上升到100%时,有机物的透量及分离系数同时增加。     

Synthesis and Characteristics of a New Fluorogenic Substrate for Horseradish Peroxidase

N,N′-Dicyanomethyl-o-phenylenediamine was synthesized with a 90% yield by a reaction ofo-phenylenediamine with chloroacetonitrile in triethylamine. Our experimental results showed that it was the effective fluorogenic substrate for horseradish peroxidase (HRP) and hemin. TheK_mfor the HRP system was 48 μM,and that for hemin was 1.3 μM.Properties of the substrate were evaluated from the detection limits of enzymes and H₂O₂. The linear ranges for the determination of HRP and hemin were 21–150 pMand 2–20 nM,respectively. The linear range for the determination of H₂O₂using HRP or hemin was 18–140 and 60–1000 nM,respectively. The structural elucidation of the fluorescent product using NMR and mass spectral techniques was proposed to be 1,2-dihydro-2-imido-imidazo[1,2-a] quinoxaline. Based on the product structure and earlier reports, the possible reaction mechanism of HRP and the substrate was also proposed, i.e., two steps for ring closures, one step of isomerization, and a final step of oxidative dehydrogenation.     

Polymeric pH indicators immobilized PVA membranes for optical sensors of high basicity based on a kinetic process

Two kinds of polymeric pH indicators PPF (phenolphthalein-formaldehyde product) and CPF (o-cresolphthalein-formaldehyde product) immobilized cross-linked poly(vinyl alcohol) membranes (PPF-PVA and CPF-PVA) for optical intermittent determination of high basicity ([OH⁻] = 1-8 M) based on a kinetic process were developed. In our previous work, we had demonstrated that PPF-PVA and CPF-PVA could perform the determination of high pH values from pH 10.0 to 14.0. Here the discoloring kinetic behaviors of PPF-PVA and CPF-PVA were compared with those of free phenolphthalein, o-cresolphthalein and thymolphthalein. Experimental results and theoretical analysis indicated that the response behaviors of the optodes’ membranes in concentrated NaOH solutions were diffusion-independent and still complied with the pseudo-first-order kinetics. In addition, two data analysis methods for determination were presented. One was directly based on the reduced absorbance; the other was based on the discoloring kinetic constant. It was found that the latter could perform a rapid (60 s) and reliable (relative standard deviation: 2.6%) determination for high basicity. These kinds of optodes can be used repeatedly when they are immersed in low-pH solutions to regain the protonated form after each determination.     

Novel construction of the brassinolide side chain

A stereoselective synthesis of brassinolide, which involves construction of the side chain by a highly stereoselective aldol reaction between 20S-6β-methoxy-3α,5-cyclo-5α-pregnane-20-carboxaldehyde 2 and ketone 3 or 4 catalyzed by l-proline, is described.     

Studies of the electrochemical behavior of epinephrine at a homocysteine self-assembled electrode

The self-assembled electrode with the homocysteine monolayer (Hcy/Au) has been characterized by infrared spectroscopy and ac impedance spectroscopy in electrolyte. The Hcy/Au electrode is demonstrated to promote the electrochemical response of epinephrine (E) by cyclic voltammetry. A pair of well-defined redox waves was obtained and the calculated standard rate constant (k_s) is 2.1×10⁻² cm s⁻¹ at the self-assembled electrode. The reduction peak of E can be used to determine the concentration of E in presence of ascorbic acid (AA) owing to the Hcy/Au also promoting the electrochemical oxidation of AA.