一种基于光纤萨尼亚克环的新型传感结构

提出了一种实现全光纤多扰动测量的基于光纤萨尼亚克环的新型传感结构。该传感结构采用新型的双萨尼亚克环结构并用波分复用技术代替了传统的双光源结构，减小了系统损耗，实现了对多扰动的位置的测量。分析了传感原理，推导了数学模型，表明测量误差与解调电路的频率响应有关，并进行了单频和多频扰动的实验研究，实验证明了理论分析的正确性。     

智能化掺铒光纤放大器

介绍一种智能化的掺铒光纤放大器(EDFA)技术.基于掺铒光纤的光放大特性与EDFA内外部工作参量(如构成EDFA的元器件参量、泵浦激光参量、输入/输出光信号参量等)的关系,采用智能化处理技术使EDFA能按照外界条件,自动地调整自身工作状态,使之符合应用系统的需要.智能化掺铒光纤放大技术可以使EDFA的应用更灵活,既可用作前置放大,也可用作功率放大或线路放大,同时还带来一些新的特点和优越性能.实验制作的智能化EDFA可以在输入信号小到-40dBm或大到+10dBm即约50dB的宽动态范围内正常工作.     

Phase transition and pitting corrosion behaviour for Mo—implanted aluminium

Molybdenum ions are implanted into aluminium with high ion flux and high dose at elevated temperatures of 200℃, 400℃ and 500℃. Due to the high temperature and high flux of vacancies and interstitial atoms, the atom diffusion and chemical effects are enhanced during the ion implantation. The effects increase with increasing ion flux and dose, so that new phase formation and phase transition emerge noticeably. X-ray diffraction analysis shows that when the aluminium is implanted with Mo ions at a low ion flux (25μA/cm²), the Al₅Mo alloy is formed. The atomic ratio of Mo/Al of the Al₅Mo phase is close to 20%. When the aluminium is implanted with Mo ions at a high ion flux (50μA/cm²), the phase transition from Al₅Mo to Al₁₂Mo appears, and the latter is dominant, which is determined to be the final phase. The ratio of Mo/Al in Al₁₂Mo is 7.7%. Rutherford backscattering spectroscopy indicates also that the Mo/Al atom ratio is ～7% to ～8% in Mo-implanted aluminium. The atomic ratios of the constituents in Al₅Mo and Al₁₂Mo are of stoichiometric composition for these alloys. The thicknesses of the Al₁₂Mo alloy layers for Mo-implanted Al with ion doses of 3×10¹⁷/cm² and 1×10¹⁸/cm² are 550nm and 2000nm, respectively. The pitting corrosion potential V_p increases obviously. It is clear that due to the formation of Al₁₂Mo alloy layer, the pitting corrosion resistance is enhanced.     

Dielectric effect on the rf characteristics of a helical groove travelling wave tube

A new type of partial-dielectric-loaded helical groove slow-wave structure (SWS) for millimetre wave travelling wave tube (TWT） is presented in this paper.The radio-frequency characteristics including the dispersion properties,the longitudinal electric field distribution and the beam-wave coupling impedance of this structure are analysed.The results show that the dispersion of the helical groove circuit is weakened,the phase velocity is reduced and the position of the maximum Ez is moved from the mouth to the inside of the groove after partially filling the dielectric materials in the helical groove SWS.Therefore,the dielectric-loaded helical groove SWS is suitable for a multi-beam TWT with broad band and high gain.     

The orientation-selective growth of LaNiO3 films on Si(100) by pulsed laser deposition using a MgO buffer

Highly (100)-oriented, (110)-oriented and polycrystalline LaNiO₃ (LNO) films were successfully prepared on Si(100) using an oriented MgO film as a buffer. It was somewhat surprising to find that that the orientation relation between the LNO film and the corresponding MgO buffer was: LNO(100)\MgO(110), LNO(110)\MgO(111) and LNO(polycrystalline)\MgO(100). The crystalline quality of the LNO films was shown to be sensitive to the preparation conditions of the MgO buffer. The film surface was very smooth, without micrometer-sized droplets being observed. All LNO films were of metallic conductivity, with a room-temperature resistivities of approximately 250, 280 and 420 μΩ cm for the (110)-oriented, (100)-oriented and polycrystalline LNO, respectively. Received: 2 April 2001 / Accepted: 23 October 2001 / Published online: 3 June 2002     

Interference of transverse rings in multifilamentation of powerful femtosecond laser pulses in air

We observe multiple filaments and interference of their ring structures in the propagation of 14 mJ, 45 fs infrared laser pulse in air. We suggest a simple physical model describing the formation and the interference of rings as the result of superposition of the background field of the whole beam and the fields that diverge from the filaments due to the defocusing in the laser-produced plasma. The size and the number of maxima in the interference pattern depend on the position of the filament formation along the direction of propagation. The simulated picture of the ring structure interference is in qualitative agreement with the one obtained from the experiment.     

偏硅酸钙中Pr3+的4f5d态的光谱特性及Pr3+→Gd3+的能量传递

合成了高效发射UV光的CaSiO3:Pr^3 新型荧光体，研究了室温下Pr^3 的4f5d态的发射和激发光谱，Pr^3 的4f5d态的最低子能级向4f^2组态的^3H4，^3H6和^1G4能级跃迁产生UV发射，并不伴随有4f-4f能级跃迁的可见光发射。Pr^3 的浓度猝灭是由于辐射和无辐射能量传递造成的，同时，在CaSiO3中，存在Pr^3 →Cd^3 的能量传递，探讨了其能量传递特性。     

人体胆结石难溶物的扫描电镜观察和红外光谱研究

用傅里叶变换红外光谱仪和扫描电镜研究了胆色素型和混合型胆结石经氯仿、乙醇、乙醚、盐酸等溶剂溶解剩余的主要组分和微观结构。结果表明，胆红素盐、蛋白质、脂肪酸盐、碳酸钙等为难溶物；棕色色素胆石中的蛋白质的二级结构似a-螺旋为主。扫描电镜观察显示，在色素型和混合型胆石难溶物中都出现了可能为蛋白质的薄膜带状物，讨论了难溶物与结石形成的关系。     

脑细胞激活素药物的化学成分分析

采用日本岛津LC-60A型高压液相色谱仪和美国P-E3030型原子吸收分光光度计，对该药进行了氨基酸、维生素和化学元素的含量测定。结果表明，该药含有18种氨基酸，不少于3种维生素和20几种化学元素，为进一步改进该药物的合理配制方法和临床应用提供了参考数据。     

FTIR光谱遥测红外药剂的燃烧温度

本文利用遥感FTIR光谱，对红外药剂的燃烧特性进行了研究。在分辨率为4cm^-1时，收集4700－740cm^-1波段的光谱。从HF等燃烧产物发射的分子振转基带精细结构的谱线强度分布，可以对燃烧温度进行遥感测定，并给出了燃烧温度随时间的变化关系，实验结果表明燃烧表面附近温度梯度很大，存在着急剧的变化温度场，同时也说明，在不干扰火焰温度场的情况下，利用遥感FTIR光谱对剧烈的、非稳态快速燃烧的火焰温度进行连续实时的遥感测量，是一种快速、准确、灵敏度高的测温方法，显示了它在燃烧温度测量、产物浓度测试以及燃烧机理研究等方面的应用前景。