Multiple fire interactions: A further investigation by burning rate data of square fire arrays

This paper presents the first effort to explore the spatial distributions of the burning rates in group fires consisting of a large number of fire points, by analyzing burn-out time data from experimental square fire arrays ranging from 3 × 3 to 15 × 15. A new concept termed fire layer is introduced and defined to characterize the spatial locations of fire points by which the complex spatial variations of burning rates, under different conditions, are analyzed and physically interpreted. Analysis shows that the fire layer burning rates vary from outer to inner in definite nonlinear modes. This indicates that the two fire interaction effects, heat feedback enhancement and air supply restriction, involve distinct spatial fluctuations in fire arrays. The spatial fluctuations of the two interaction effects are significantly affected by the two major parameters, fire spacing and fire array size. Definite spatial regions and parameter ranges for the spatial fluctuations and high competitions of the two interaction effects are clearly distinguished. It is demonstrated that the average burning rates of all fire layers involve consistent variations versus fire spacing or fire array size, especially with high comparability to the entire fire array. It is found that by varying fire spacing, the average burning rates for all fire layers vary linearly versus the fire area ratio, within the same ranges as the entire fire array, while there exist different fluctuation modes of fire layer burning rates with respect to fire array size. Furthermore, analysis shows that the burning rates of all fire layers will be significantly affected by fire merging when it occurs. Finally, a new approach is presented to simulate fire propagation among discrete fuel sources, by which the positive effect of the surrounding new fire points on the burning rates of the original ones is definitely indicated.     

基于人工传输线结构的小型化低通滤波器

提出了一种基于人工传输线结构的小型化低通滤波器的设计方法。通过利用电磁仿真软件直接构建出微带电抗器件并对其逐一进行参数提取验证,将设计的微带电抗器件进行组合集成和调试后得到相应的低通滤波电路。对5阶巴特沃兹低通滤波电路和0.5 dB切比雪夫低通滤波电路的设计和测量结果对比表明,采用本方法所设计的滤波器结构紧凑,面积约为常规低通滤波电路的23%,测量结果与仿真吻合。     

大口径KDP晶体角度相位匹配离线测量精度研究

为满足惯性约束聚变(ICF)实验对激光驱动器高效三倍频能力的要求, 对离线测量晶体角度相位匹配方案进行了优化。采取的主要优化措施是：提高晶体准直技术能力;降低模拟小口径激光输出变化对测量不稳定性的影响。通过理论分析和对实际测量结果的系统分析,得到了晶体离线测量的不确定度：其中二倍频相位匹配角测量扩展不确定度为15.94 rad,三倍频相位匹配角测量扩展不确定度为27.8 rad,达到了较高的晶体离线测量精度要求。     

Rapid detection of doxycycline content in duck meat by using silver nanoparticles and alkylphenols polyoxyethylene enhanced fluorescence of europium complex

Doxycycline can coordinate with europium (III) to form europium (III)-doxycycline complex, which can emit the fluorescence characteristic peak of europium (III) at 617 nm in alkaline solution, and the experiment proved that the fluorescence intensity could be further enhanced in the presence of silver nanoparticles and surfactant alkylphenols polyoxyethylene. So this method was applied to detect doxycycline content in duck meat in this research. First, 390 and 617 nm were selected as the optimum excitation wavelength and optimum emission wavelength by three-dimensional fluorescence spectrometry, respectively. Second, the experimental conditions were optimized through single factor experiment. Lastly, the samples of doxycycline concentration range of 0.05–12 mg/L were analyzed under the optimum experimental conditions. A good linear relationship between the doxycycline concentration and the fluorescence intensity was obtained, and the determination coefficient and the root mean squared error of prediction were 0.9982 and 0.4363 mg/L, respectively. This research showed that it was feasible to achieve the rapid detection of doxycycline content in duck meat by using silver nanoparticles and alkylphenols polyoxyethylene enhanced the fluorescence of europium complex.     

Er3+:Yb3+共掺杂氟氧混合物玻璃的上转换发光研究

制备了化学配方为 (5 0 -x)GeO2 ·PbF2 ·WO3·(6 +x)CdF2 ·1 4Yb2 O3·0 6Er2 O3(x =10 ,2 0 ,30 )氟氧混合物玻璃。研究了 930nm发光二极管激发下Er3+ :Yb3+ 共掺杂情形下的Er3+ 离子的上转换发光特性 ,观测到了Er3+ 离子中心波长位于 5 4 3,5 5 0和 6 5 5nm处的三个强荧光发射带。通过对样品的反斯托克斯喇曼光谱的测量 ,确定了基质的最大声子能量 ,在此基础上分析了上转换荧光的产生机制。利用基质的平均电负性差和平均阳离子场强这两个参数 ,讨论了基质材料中GeO2 和CdF2 含量的调整对上转换发光的影响。     

高分辨质谱用于分析和检测α-硫羰基硫代甲酰胺类化合物

苯乙酮及其衍生物与氯化亚砜反应所得中间产物再与仲胺反应得α－羰基硫代甲酰胺（1a-1f),经硫代得目标物α－硫羰基硫代甲酰胺（2a-2f)。化合物2a-2f含有二个硫羰基,为深红或深绿色晶体,可用作远红外吸收染料、激光Q开关及有机导体等。本文利用英国Micromass公司的OA－TOF高分辨质谱仪对α－硫羰基硫代甲酰胺类化合物的裂解行为进行了详细的研究。结果表明该类化合物容易失去S2分子形成特征的碎片离子M－S2（基峰）,为分析和检测这类化合物提供了一种有效的分析方法。OA－TOF高分辨质谱仪体积小、操作简单、快速,适合于分析纯的α－硫羰基硫代甲酰胺类化合物、检测混合物中及作为反应中间体的这类化合物。     

Geometric Phase in a Time-Dependent System with Laguerre Polynomial State

By using of the invariant theory, we have studied the geometric phase in a time-dependent system with Laguerre polynomial state, the dynamical and geometric phases are given, respectively. The Aharonov-Anandan phase is also obtained under the cyclical evolution.     

Cold atom space clock with counter-propagating atoms

<正>We discuss the feasibility of realizing a cold atom space clock with counter-propagating cold atoms in microgravity.The design of the space clock is based on an atomic beam clock with Ramsey cavity,except that magneto-optical trap(MOT) is placed at each side.Cold atoms are launched simultaneously from the MOTs at both sides of the clock and they move at the counter-direction towards each other.The velocity of the launched atoms is precisely controlled to Ramsauer-Townsend resonance so that no additional collision frequency shift takes place.Such configuration can efficiently cancel the frequency shift resulting from cavity phase shift and increase the signal-to-noise ratio(SNR).     

Thermo-optically tunable silicon photonic crystal light modulator

We designed, fabricated, and characterized a thermo-optically tunable compact (10 μm × 10 μm) silicon photonic crystal (PhC) light modulator that operates at around 1.55 μm for TE polarization. The operational principle of the device is the modulation of the cutoff frequency in a silicon-based line defect PhC. The cutoff frequency is shifted because of the thermo-optic tuning of the silicon refractive index, which is realized by localized heating on the PhC. The modulator is formed by a triangular lattice array of cylindrical air holes on a silicon-on-insulator wafer. Optical characterization was carried out, and the result clearly showed thermo-optic tuning of the cutoff frequency at around 1.55 μm.