Modeling the competitive dissociation of protonated 2,3-butanedione. The enthalpy of formation of methylhydroxycarbene

The enthalpy of formation of methylhydroxycarbene, CH(3)COH, has been determined from measurements of the threshold energy for collision-induced dissociation of protonated 2,3-butanedione in a flowing afterglow-triple quadrupole mass spectrometer and found to be 16 +/- 4 kcal/mol, 57 +/- 4 kcal/mol higher than that of acetaldehyde. From the measured enthalpy of formation, the difference between the first and second C-H BDEs in ethanol is found to be 17 kcal/mol, which implies a singlet-triplet splitting of 28 kcal/mol in the carbene. The activation energies for loss of ketene and carbon monoxide from protonated butanedione are found to be 60 +/- 4 and 50 +/- 4 kcal/mol, respectively. On the basis of experimental and computational results, the loss of carbon monoxide is proposed to proceed through a tight transition state. Although calculations also suggest a tight transition state for loss of ketene, the experimental data indicate that it occurs via a loose transition state, possibly forming by proton transfer along the direct dissociation pathway.     

Synthesis, optical, and electrochemical properties of conjugated oligomers derived from 4-bromo-4-(n-butyl)-2,2-biphenyl

The synthesis, optical, and electrochemical properties of semi-conducting co-oligomers of biphenyl/oligothiophenes and homo-oligophenylenes derived from a precursor 4-bromo-4^′-(n-butyl)-2,2^′-biphenyl, which was synthesized by a direct alkylation from 4,4^′-dibromo-2,2^′-biphenyl using n-butyl lithium, are reported.     

4D-QSAR analysis of a series of antifungal p450 inhibitors and 3D-pharmacophore comparisons as a function of alignment

A training set of 55 antifungal p450 analogue inhibitors was used to construct receptor-independent four-dimensional quantitative structure-activity relationship (RI 4D-QSAR) models. Ten different alignments were used to build the models, and one alignment yields a significantly better model than the other alignments. Two different methodologies were used to measure the similarity of the best 4D-QSAR models of each alignment. One method compares the residual of fit between pairs of models using the cross-correlation coefficient of their residuals of fit as a similarity measure. The other method compares the spatial distributions of the IPE types (3D-pharmacophores) of pairs of 4D-QSAR models from different alignments. Optimum models from several different alignments have nearly the same correlation coefficients, r(2), and cross-validation correlation coefficients, xv-r(2), yet the 3D-pharmacophores of these models are very different from one another. The highest 3D-pharmacophore similarity correlation coefficient between any pair of 4D-QSAR models from the 10 alignments considered is only 0.216. However, the best 4D-QSAR models of each alignment do contain some proximate common pharmacorphore sites. A test set of 10 compounds was used to validate the predictivity of the best 4D-QSAR models of each alignment. The "best" model from the 10 alignments has the highest predictivity. The inferred active sites mapped out by the 4D-QSAR models suggest that hydrogen bond interactions are not prevalent when this class of P450 analogue inhibitors binds to the receptor active site. This feature of the 4D-QSAR models is in agreement with the crystal structure results that indicate no ligand-receptor hydrogen bonds are formed.     

Application of a novel micro-injector in the determination of indole derivatives in the rat pineal gland by capillary electrophoresis with electrochemical detection

A novel micro-injector has been fabricated for capillary electrophoresis (CE). It was successfully used for the determination of some indole derivatives for example melatonin (MT), serotonin (5-HT), tryptophan (Trp), and 5-hydroxy-tryptophane (5-HTrp) in the rat pineal gland by capillary electrophoresis with electrochemical detection (CE-EC). CE was performed in 0.20 mol L(-1) phosphate buffer (pH 8.0). The compounds investigated can be well separated and detected within 15 min. The working electrode used was a 300-microm diameter carbon electrode positioned opposite the outlet of the capillary. The relationship between peak current and analyte concentration was highly linear in the range from 0.10 to 500 micromol L(-1); detection limits (S/N = 3) were 0.03-0.13 micromol L(-1). The proposed method has been successfully used to analyze real biological samples.     

细胞动力学研究VIII.Na2SeO3对黑根菌作用特征

The Characteristics of the action of Na2SeO3 on Rhizopus nigrocans has been studied by means of microcalorimetry, the relationship between growth rate constants and the concentration of Na2SeO3 is
k=0.03608exp[-0.003608(c+8.60)2]
It was found that Na2SeO3 of low concentration has promoting action on the growth of Rhizopus nigrocans cells, and high concentration of Na2SeO3 has inhibitory action. The study has provided a lot of information on the bioaffect of selenium and the research of toxicology.     

Study of Six Polycyclic Aromatic Hydrocarbons by Chemical Deoxygenation Microemulsion-Stabilized Room Temperature Phosphorimetry

Six polycyclic aromatic hydrocarbons (PAHs) are studied by chemical deoxygenation microemulsion-stabilized room temperature phosphorimetry with sodium sulfite as an oxygen scavenger and thallous nitrate as a heavy atom perturber in sodium dodecyl sulfate medium. Several factors influencing room temperature phosphorescence such as the concentration of sodium dodecyl sulfate, the heavy atom concentration, the pH, and the concentration of sodium sulfite are discussed and the quenching effect of NO₂⁻on room temperature phosphorimetry of PAHs was compared in the microemulsion and micelle media.     

New perylene polyimides containing p‐n diblocks for sensitization in TiO2 solar cells

Three novel perylene polyimides (PPIs) containing p‐n diblock units were designed and synthesized for use in dye‐sensitized mesoporous TiO₂ solar cells. They all dissolve in m‐cresol and N‐methyl‐2‐pyrrolidone (NMP). Their visible light absorption, electrochemical and photoelectrochemical properties were systematically studied. The polyimides have band gap energies of 2.16, 2.19 and 2.25 eV deduced from ultraviolet–visible absorption spectra, and electron affinity (E_a) and ionization potential (IP) of ?3.93 and 6.10 eV for PPI1, ?3.94 and 6.13 eV for PPI2, ?3.93 and 6.59 eV for PPI3, respectively, deduced from cyclic voltammogram. Experimental data show that introduction of 4,4′‐bisaminetriphenylamine cannot only greatly enhance optic‐electro conversion efficiency, but also enhance the dissolubility which in favorable for making the devices. The relationship of structure and properties of PPI is discussed and the mechanism of photocurrent generation is explained. Copyright © 2004 John Wiley & Sons, Ltd.     

我国粘度计量工作中存在的问题

指出我国粘度计量工作中存在的一些问题，在修订粘度计检定规程，规范标准粘度的名称和有效期以及加强对粘度计检定工作的管理等方面的出了建议，强调了在标准粘度液证书中应给出不同温度下的运动粘度和粘度值，以满足粘度计检定工作的需要。     

Effect of Ce<Superscript>3+</Superscript> on spectral characteristic of D1/D2/Cytb559 complex from spinach

It was studied by spectroscopy that PSII reaction center complex consisting of three polypeptides, D₁, D₂ and Cytb559, were purified from PSII particle of CeCl₃ treated spinach. The results of the experiment show that Ce³⁺ could improve the growth of spinach, and accelerate electron transport of PSII particles. Of chl-a of UV-Vis spectrum of D1/D2/Cytb559 complex, Soret band was blue-shifted by 3 nm and Q band by 2 nm, respectively, and the fluorescence emission peak was blue-shifted by 5 nm in CeCl₃-treated spinach compared with the one in control. By the extended X-ray absorption fine structure (EXAFS) spectroscopy methods, it has been found that Ce³⁺ is coordinated with 8 nitrogen atoms in the first coordination shell with Ce-N bond length of 0.253 nm, and Ce³⁺ with 6 oxygen atoms in the second coordination shell with Ce-O bond length of 0.32 nm. However, the secondary structure of D1/D2/Cytb559 complex by circular dichroism (CD) spectroscopy has no significant change after CeCl₃ treated. It might be that Ce³⁺ binds to porphyrin rings of chlorophyll and oxygen of amino acid residue of polypeptide in D1/D2/Cytb559 complex, and then accelerates the primary reaction of PSII, intensifies function of P680⁺ primary electron donor of D1/D2/Cytb559, but there is little change in conformation of PSII reaction center complex.     

与时俱进，不断开创物理化学课程建设新局面

As a necessary basic theory course for undergraduates majoring in chemistry, materials, pharmacy, chemical engineering, and biology, physical chemistry plays an important role in cultivating talents to meet the needs of social and economic development. Over the years, the teaching team of physical chemistry of East China University of Science and Technology has carried out the curriculum reform and innovation persistently based on "Team building as the foundation, resource building as the root, mode innovation as the soul, ability training as the origin". This paper will summarize our thinking and experience in striving for the first-class course from the aspects of first-class team construction, first-class resource construction, teaching connotation innovation, teaching mode exploration, and extract the experience that can be used as reference by teaching peers.