Determination of active ingredients of Rhododendron dauricum L. by capillary electrophoresis with electrochemical detection

High-performance capillary electrophoresis with electrochemical detection was employed to analyse active ingredients of Rhododendron dauricum L., an important crude herb frequently used in Chinese medicines. Farrerol, quercetin, syringic acid, vanillic acid, 4-hydroxybenzoic acid, protocatechuic acid are major important active ingredients. Operated in a wall-jet configuration, a 300-microm diameter carbon-disk electrode was used as the working electrode, which exhibits a good response at +950 mV (vs. saturated calomel electrodes) for six analytes. Under the optimum conditions, the analytes were baseline separated within 16 min in a borax buffer (pH 8.7). Notably, excellent linearity was obtained over two orders of magnitude with detection limits (S/N=3) ranged from 9 x 10(-7) to 3.0 x 10(-6) M for all analytes. This method was successfully used in the analysis of Rhododendron dauricum L. with relatively simple extraction procedures, and the assay results were satisfactory.     

Measurements of the cross section for e(+)e(-) --> hadrons at center-of-mass energies from 2 to 5 GeV

We report values of R = sigma(e(+)e(-)-->hadrons)/sigma(e(+)e(-)-->mu(+)mu(-)) for 85 center-of-mass energies between 2 and 5 GeV measured with the upgraded Beijing Spectrometer at the Beijing Electron-Positron Collider.     

Polarization-insensitive nonlinear optical loop mirror demultiplexer with twisted fiber

We experimentally demonstrate reduction of the polarization sensitivity of a nonlinear optical loop mirror (NOLM) from 5 to 0.5 dB by use of 550 m of twisted dispersion-shifted fiber with a twist rate of 8 turns/m (24 turns/beat length). The twisting of the fiber induces circular birefringence and equates the parallel-and the orthogonal-polarization nonlinear phase-shift terms. Experimental results show that the polarization sensitivity monotonically decreases from 5 dB for nontwisted fiber to 0.5 dB for fiber that is twisted at a rate of 8 turns/m, and the twist rate should be more than 4 turns/m (>10 turns/beat length) for emulation of circularly polarized fiber. The minimum polarization sensitivity occurs when the control-pulse polarization is aligned with one of the eigenmodes of the twisted fiber. With the fiber twisted at a rate of 8 turns/m in the NOLM, the nonlinear transmission is 23% at a switching energy of 4 pJ/pulse. Simulations confirm the observed behavior and show that the remaining polarization sensitivity results from energy transfer between orthogonal modes of the signal pulse.     

斜波导喇曼振荡器

 采用斜波导的喇曼氢气池, 使泵浦激光束在波导内部传播, 增大了受激喇曼散射的作用区域。在传播过程中光束截面逐渐被压缩, 补偿因波导内壁的反射损耗而引起的功率密度下降。在一定气压范围内提高了喇曼转换的效率, 并利用波导对激光束的均匀作用, 使输出的一阶斯托克斯光光强的均匀性获得改善。     

Cathodoluminescent characteristics of green-emitting ZnAl2O4:Mn thin-film phosphors

Thin films of ZnAl₂O₄:Mn were grown on aluminosilicate ceramic plates using spray pyrolysis of aqueous solutions. The cathodoluminescence (CL) properties of the films under low to medium excitation voltage (<5 kV) were investigated. The films exhibited green CL after being annealed at temperatures above 550 °C, which corresponds to the transition between ⁴T₁ and ⁶A₁ of Mn²⁺ ions located in the tetra coordination of the Zn²⁺ site in the spinel structure. The chromaticity coordinates were x=0.150 and y=0.734 with a dominant wavelength of 525 nm and an 82% color purity. The CL luminance and efficiency depended on the excitation voltage and current density. Saturation effects were observed as the current density increased. A luminance of 540 cd/m² and an efficiency of 4.5 lm/W were obtained at an excitation voltage of 4 kV with a current density of 38 A/cm². PACS 78.60.Hk     

Velocity profiles in repulsive athermal systems under shear

We conduct molecular dynamics simulations of athermal systems undergoing boundary-driven planar shear flow in two and three spatial dimensions. We find that these systems possess nonlinear mean velocity profiles when the velocity u of the shearing wall exceeds a critical value u(c). Above u(c), we also show that the packing fraction and mean-square velocity profiles become spatially dependent with dilation and enhanced velocity fluctuations near the moving boundary. In systems with overdamped dynamics, u(c) is only weakly dependent on packing fraction phi. However, in systems with underdamped dynamics, u(c) is set by the speed of shear waves in the material and tends to zero as phi approaches phi(c), which is near random close packing at small damping. For underdamped systems with phi相似文献   

Direct optical resolution of the enantiomers of novel chiral tetrahedral metal clusters by HPLC on a cellulose tris-(3,5-dimethylphenylcarbamate) stationary phase

The enantioseparation of seven novel chiral transition metal tetrahedral clusters has been achieved for the first time on cellulose derivatized with tris(3,5-dimethylphenylcarbamate) (CDMPC) as chiral stationary phase (CSP) and hexane containing different alcohols as modifiers as mobile phases. The effect of mobile-phase composition on enantioselectivity was studied, and the effect of structural variation of the solutes on their enantioseparation was also investigated. It was found that both the metal in the tetrahedral core and the ligand coordinated to the atom in the tetrahedral core had significant effects on the chromatographic behavior of the analytes.     

Optimal switching from recording to fixing for high diffraction from a LiNbO3:Ce:Cu photorefractive nonvolatile hologram

An oscillatory characteristic of diffraction is observed as a result of strong beam coupling in a weakly oxidized LiNbO3:Ce:Cu crystal during the recording step in the production of nonvolatile photorefractive holograms. On this basis the optimal switching time from the recording step to the fixing step for high diffraction of a fixed hologram is studied. It is shown that switching after the first diffraction maximum leads theoretically to fixed diffraction of as much as 100% with a suitable switching time. Both an experimental demonstration and a theoretical simulation are presented.