Application of co-eluting structural analog internal standards for expanded linear dynamic range in liquid chromatography/electrospray mass spectrometry

Non-linear standard calibration curves occur frequently in liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS), necessitating the use of non-linear regression curve fitting or a reduction in assay dynamic range. Non-linearity can be minimized by the use of stable isotope internal standards, if the cause of curve bending is ionization saturation. Unfortunately, stable isotope internal standards can be difficult or expensive to synthesize. Structural analog internal standards, if sufficiently close to analytes both in chemical structures and HPLC retention times, may mimic the effect of stable isotope internal standards. Tentative experimental evidence supporting this concept is presented in this paper.     

Biosorption of copper(II) and zinc(II) from aqueous solution by Pseudomonas putida CZ1

To study Pseudomonas putida CZ1, having high tolerance to copper and zinc on the removal of toxic metals from aqueous solutions, the biosorption of Cu(II) and Zn(II) by living and nonliving P. putida CZ1 were studied as functions of reaction time, initial pH of the solution and metal concentration. It was found that the optimum pH for Zn(II) removal by living and nonliving cells was 5.0, while it was 5.0 and 4.5, respectively, for Cu(II) removal. At the optimal conditions, metal ion biosorption was increased as the initial metal concentration increased. The adsorption data with respect to both metals provide an excellent fit to the Langmuir isotherm. The binding capacity of living cells is significantly higher than that of nonliving cells at tested conditions. It demonstrated that about 40-50% of the metals were actively taken up by P. putida CZ1, with the remainder being passively bound to the bacterium. Moreover, desorption efficiency of Cu(II) and Zn(II) by living cells was 72.5 and 45.6% under 0.1M HCl and it was 95.3 and 83.8% by nonliving cells, respectively. It may be due to Cu(II) and Zn(II) uptake by the living cells enhanced by intracellular accumulation.     

Redox Polymerization of Methyl Methacrylate in the Fluorous Triphasic System

Fluorous-phase chemistry is currently a topic of considerable interest1-6. Since fluoroustriphasic reactions were first described by the Curran and co-workers7, this triphasicsystem has been widely used for detagging7,8 and phase-vanishing reactions9-11. …     

聚乙酸乙烯酯的溶液性质及长链支化度

用粘度法,GPC和LALLS测定了线型及不同转化率的PVAc分级级份的粘度与分子量。提出了以线型和支化聚合物的K,α计算临界分子量的方法。讨论了表征PVAc长链支化的各种参数与分子量和转化率之间的关系以及不同条件下迭代法计算的支化频率λ的差异。实验结果表明,特性粘数和数均分子量乘积所表示的流体力学体积更适合GPC的普适标定概念。     

超临界NaCl水溶液的分子动力学模拟

采用分子动力学模拟的方法对超临界NaCl水溶液的微观结构进行了研究.模拟发现在所研究超临界条件下,密度的变化比温度的变化对超临界NaCl水溶液的微观结构影响更大.温度及密度对Cl－ H2O径向分布函数的影响比对Na＋ H2O径向分布函数的影响要大.超临界条件下,各gNa＋－Cl－在0.261 nm处出现峰值,表明Na＋、Cl－之间发生了离子的缔合.超临界条件下,随温度增加,缔合作用增强；随密度增加,缔合作用减弱.本文工作为建立可适用于超临界条件下的电解质热力学模型提供了依据.     

A new two‐dimensional CdII coordination polymer constructed by pyrazine‐2,3‐dicarboxyl­ate

In the title compound, poly[μ₅‐pyrazine‐2,3‐dicarboxyl­ato‐cadmium(II)], [Cd(C₆H₂N₂O₄)]_n or [Cd(pdc)]_n, where pdc is the pyrazine‐2,3‐dicarboxyl­ate anion, the Cd^II atom is six‐coordinated by five carboxyl­ate O atoms and one N atom from five different pdc ligands in a distorted octa­hedral CdO₅N coordination geometry. Two Cd^II atoms are bridged by carboxyl­ate groups of the pdc ligands to create a dimeric unit. The dimeric units are further connected by the pdc ligands to generate an inter­esting two‐dimensional structure.     

Optical properties of transparent copper nanorod and nanowire arrays embedded in anodic alumina oxide

Transparent copper nanorod/nanowire arrays and anodic alumina oxide composite films have been prepared by alternating current electrodeposition, and their linear optical properties have been systematically characterized by absorption spectra. In the experimental spectra, there exist transverse and longitudinal resonance peaks, which are caused by the surface-plasmon resonance along the diameter and the length of the copper nanorods, respectively. The transverse resonance peak is affected by the diameter and aspect ratio of the nanorod. The longitudinal resonance peak appears at longer wavelength when a polarized light illuminates the film with an angle of incidence of about 70 degrees , where the angle is defined with respect to the surface normal. Moreover, the longitudinal resonance mode is sensitive to the polarization direction when compared with the transverse resonance mode.     

CuO/γ-Al2O3单分散催化剂的XAFS研究

采用XAFS方法研究浸渍法制备并于低温焙烧的CuO/γ-Al2O3催化剂的局域结构.对于CuO负载量小于单层分散阈值的CuO/γ-Al2O3(0.4mmol/100m2),结果表明,CuO物种是以层状分散的孤立原子簇存在于γ-Al2O3载体表面,其第一近邻Cu-O配位环境的结构与晶态CuO的相似,键长和配位数分别为0.195nm和4.对于CuO负载量等于单层分散阈值的CuO/γ-Al2O3(0.8mmol/100m2),已有少量的CuO纳米颗粒生成.对于CuO负载量大于单层分散阈值的CuO/γ-Al2O3(1.2mmol/100m2),其结构与多晶CuO的相近.基于CuO在γ-Al2O3载体上的三种不同分散状态的结构特点,我们提出了CuO/γ-Al2O3催化剂的结构模型.     

稀土电解槽的研究现状及发展趋势

综述了国内外稀土电解槽的类型和特点,国内在稀土电解槽的电场、磁场、流场、熔盐性质、工艺条件、电阻常数以及电解槽的热平衡和电极材料等方面的研究现状。提出了槽电压与结构参数之间的关系以及结构参数的优化设计方法,根据槽容量进行优化设计可显著降低槽电压,达到节能降耗的目的。     

流体熵相关性质的Monte Carlo模拟新方法

提出了用于计算实际体系熵相关性质的Monte Carlo多级取样分子模拟方法. 应用这一方法, 对硬球流体的化学势及Helmholtz自由能进行了估算, 得到了满意的结果. 计算化学势时, 不存在通常试验粒子方法所遇到的高密度问题. 该方法特别适合规律性的系统研究, 较之普通模拟方法要有效得多. 模拟得到的硬球体系无限稀释组份的超额化学势与对比直径的关系, 在相变区域为一条双凹曲线; 无论是在相变区还是在单相区, Carnahan-Starling公式对这一关系的描述均有较大偏差.