Localized orbitals in hydrogen bonded systems

The localized molecular orbitals for a variety of hydrogen bonded systems are obtained from their INDO and CNDO/2 wavefunctions. The bonding of these systems is qualitatively discussed in light of the localized orbitals.     

Investigation of an enantioselective non-aqueous capillary electrochromatography system applied to the separation of chiral acids

A weak anion-exchange type chiral stationary phase (CSP) based on tert.-butylcarbamoylquinine as chiral selector and silica as chromatographic support was applied to non-aqueous capillary electrochromatography. The mobile phases used consisted of acetonitrile and methanol as organic solvents, and acetic acid and triethylamine were added as background electrolytes. The influence of several experimental parameters (electrolyte concentration, acetic acid-triethylamine ratio, acetonitrile-methanol ratio and temperature) was evaluated in order to obtain improved enantioselectivity and efficiency as well as short run times for the enantiomeric separation of negatively charged chiral analytes including benzyloxycarbonyl, N-(3,5-dinitrobenzyloxycarbonyl, 9-fluorenylmethoxycarbonyl, benzoyl, acetyl and N-(2,4-dinitrophenyl) derivatized amino acids and profens. Solvent composition of acetonitrile-methanol (80:20) and enhanced electrolyte concentrations up to 600 mM acetic acid at a constant acid-base ratio of 100:1 with high applied voltages of -25 kV proved to be optimum regarding short retention times and improved efficiencies. For example, the enantiomers of Fmoc-Leu could be separated in less than 10 min with a resolution factor of 6.9 and about 100000 theoretical plates per meter.     

Recent development in HPLC enantioseparation — a selected review

Summary Recent developments in the field of separating optical isomers by HPLC are discussed in this brief review. In particular it is focussed on various techniques for direct enantioseparation, the interpretation of possible enantioselective separation mechanisms, and the advantages and limitations of the diverse methods. This goal is supported by representative and selected examples of chiral separations.     

Flache T1-Stabilität in der Strati-fizierung verseller Entfaltungen

Let 0 be the local ring of a simple singularity defined over the complex numbers and the dimension of its versal deformation space. Than it is well known that any nearby singularity in this space is also simple and has smaller unfolding dimension in the hierarchy of simple singularities. In particular this implies that the =max-stratum consists just of one point namely the given singularity. We want to generalize this concept as we are interested in families of varieties with formal unchanged singularities. For this we introduce in quite generality the notion of flat T¹-stabi1ity which may be checked for any k- algebra 0 where k is for simplicity an algebraically closed field of à priori arbitrary characteristics. We call 0 formal flat T¹ stable or for short flat T¹-stable if the following is true: if R is any deformation of 0 over an Artin local finite k-algebra A and if T¹(R/A,R) is A-flat than R is isomorphic to the trivial deformation . T¹(R/A,R) is the first cotangent module of R over A with values in R. Obviously the simple singularities A_k, D_k, E₆, E₇, E₈ fulfill this criterion over C but we look also at fibres of arbitrary stable map germs, generic singularities of algebraic varieties where we have to modify this notion in order to deal with wild ramification and to quasihomo-genous hypersurface singularities where it functorializes because in this case T¹ commutes with arbitrary base change. The notion of flat T¹-stable singularities is closely related to questions of existence of equisingular families and is used in[12] and [5], [6] to stratify certain Hilbert schemes.     

Flow-injection approach for the determination of the dynamic response characteristics of ion-selective electrodes. Part 1. Theoretical considerations

A single-line flow-injection system with a straight tube reactor is proposed for investigating the dynamic response behaviour of ion-selective electrodes. The principle of the method is based on the fact that the concentration—time curve at the electrode surface can be described theoretically in the flow-injection system under certain practically realizable conditions. The response of the ion-selective electrode to that input signal can be measured experimentally. Thus, knowing the input and the output signal of an ion-selective electrode, an appropriate model describing its dynamic behaviour can be selected among the relevant models existing in the literature. Theoretical expressions for predicting the transient response of ion-selective electrodes in the flow system when the rate-determining step is an ion-transport process through a diffusion layer or a kinetic process were elaborated.     

Non-aqueous capillary electrophoretic enantioseparation of N-derivatized amino acids using cinchona alkaloids and derivatives as chiral counter-ions

A non-aqueous capillary electrophoretic method developed with quinine and tert.-butyl carbamoylated quinine as chiral selectors for the enantioseparation of N-protected amino acids was applied to the investigation of other quinine derivatives as chiral additives. The optimum composition of the background electrolyte was found to be 12.5 mM ammonia, 100 mM octanoic acid and 10 mM chiral selector in an ethanol-methanol (60:40, v/v) mixture. Under these conditions, a series of chiral acids, as various benzoyl, 3,5-dinitrobenzoyl and 3,5-dinitrobenzyloxycarbonyl amino acid derivatives were investigated with regards to selectand-selector relationships and enantioselectivity employing quinine, quinidine, cinchonine, cinchonidine, tert.-butyl carbamoylated quinine, tert.-butyl carbamoylated quinidine, dinitrophenyl carbamoylated quinine and cyclohexyl carbamoylated quinine as chiral selector.     

Interaction of blockcopolymer micelles as probed by small-angle neutron and by small-angle X-ray scattering

 The analysis of the interaction of micelles formed by a blockcopolymer is given by means of small-angle X-ray (SAXS) and small-angle neutron scattering (SANS). The blockcopolymer consists of poly(styrene) and poly(ethylene oxide) (molecular weight of each block: 1000 g/mol) and forms well-defined micelles (weight-association number: 400, weight-average diameter: 15.4 nm) in water. The internal structure has been studied previously (Macromolecules 29:4006 (1996)) by SAXS. There it has been shown that the micelles are spherical objects. The structure factor S(q) as a function of the scattering vector q (q=(4π/λ) sin (θ/2); λ: wavelength of the radiation in the medium; θ: scattering angle) can be extracted from both sets of small-angle scattering data (SANS: q≤0.4 nm^-1; SAXS: q≤0.6 nm^-1). It is shown that particle interaction in the present system can be described by assuming soft interaction which is modeled by a square-step potential. Received: 12 May 1997 Accepted: 9 July 1997     

Microfabricated ISEs: critical comparison of inherently conducting polymer and hydrogel based inner contacts

A rigorous side by side comparison of miniature planar potassium-selective electrodes with hydrogel and potassium hexacyanoferrate(II)/(III) doped polypyrrole (PPy/FeCN) based inner contacts is presented. The planar electrodes were manufactured by screen printing as four- and five-site arrays on ceramic substrates. These electrode arrays were incorporated into a flow-through cell, which could accommodate nine electrode sites. Two identical flow cells were connected in series and the effect of the inner contacts on the analytical performance of the respective electrodes has been critically evaluated. The time necessary to reach steady state conditions has been determined and the effect of experimental parameters (temperature, ambient light intensity, CO₂, and O₂ concentration of the sample) on the potential stability of the electrodes was analyzed. At controlled temperature, the drift of the planar potassium electrodes with hydrogel and PPy/FeCN solid contact were 0.11±0.02 mV h⁻¹ and 0.03±0.007 mV h⁻¹, respectively. The experimental data proved that there is no aqueous film formation between the PPy/FeCN film and the potassium-selective solvent polymeric membrane.     

Potentiometric detection in flow analysis

Special aspects of ion-selective electrodes relevant to applications in flow-through systems are discussed. The predominant role of the dynamic response characteristics of the sensor, especially in flow-injection analysis, is emphasized. Indirectly, these characteristics can affect the linear response range, the detection limit and the selectivity properties of the sensors. As examples, flow-injection methods are described for the determination of fluoride in rain-water samples and of potassium ion activity in blood sera.