Long-term trend in CHF2Cl (HCFC-22) from high spectral resolution infrared solar absorption measurements and comparison with in situ measurements

The average tropospheric volume mixing ratio of CHF₂Cl (HCFC-22) has been retrieved from a time series of high spectral resolution ground-based infrared solar absorption spectra recorded with the McMath Fourier transform spectrometer located at the U.S. National Solar Observatory facility on Kitt Peak in southern Arizona (31.9°N, 111.6°W, 2.09 km altitude) for the time period October 1987–November 2002. The retrievals are based on fits to the well-isolated, unresolved 2ν₆ Q branch at 829.05 cm⁻¹ and the SFIT2 retrieval algorithm. The measured daily averages show a near linear rise per year in the mean tropospheric volume mixing ratio as a function of time with a best fit yielding an average increase rate of (5.66±0.15) parts per trillion (10⁻¹²) by volume per year, corresponding to (6.47±0.17)%yr⁻¹, 1 sigma, at the beginning of the time series. The tropospheric mixing ratios retrieved from the solar spectra have been compared with monthly average surface flask sampling measurements from the Climate Monitoring and Diagnostic Laboratory (CMDL) station at Niwot Ridge, Colorado (40.0°N, 105.5°W, 3013 m altitude), archived measurement from the same location, and early CMDL northern hemisphere Pacific cruise measurements. The average ratio of the retrieved tropospheric mixing ratio relative to the CMDL surface mixing ratio is 1.053 for the overlapping 1987 to 2002 time period. The retrieved mean tropospheric mixing ratio is consistent with the surface measurements within the errors estimated for the remote sensing observations.     

Monitoring process for attributes with quality deterioration and diagnosis errors

The aim of this paper is to present an online economical quality-control procedure for attributes in a process subject to quality deterioration after random shift and misclassification errors during inspections. The process starts in control (State I) and, in a random time, it shifts to out of control (State II). Once at State II, the non-conforming fraction increases according to a non-decreasing function ψ(z), where z is the number of items produced after a shift. The monitoring procedure consists of inspecting a single item at every m produced items, which is examined r times independently to decide its condition. Once an inspected item is declared non-conforming, the process is stopped and adjusted. A direct search technique is used to find the optimum parameters which minimize the expected cost function. The proposed model is illustrated by a numerical example. Copyright © 2007 John Wiley & Sons, Ltd.     

Biotransformation of arsenate to arsenosugars by Chlorella vulgaris

Chlorella vulgaris was cultivated in a growth medium containing arsenate concentration of <0.01, 10, 100 and 1000 mg l^?1. Illumination was carried out in 12 h cycles for 5 days. The health status of the culture was monitored by continuous pH and dissolved oxygen (DO) readings. Destructive sampling was used for the determination of biomass, chlorophyll, total arsenic and arsenic species. The chlorophyll a content, the DO and pH cycles were not significantly different for the different arsenate concentrations in the culture. In contrast, biomass production was significantly (p < 0.05) increased for the arsenic(V) treatment at 1000 mg l^?1 compared with 100 mg l^?1. The arsenic concentration in the algae increased with the arsenate concentration in the culture. However, the bioconcentration factor decreased a hundred‐fold with increase of arsenate from the background level to 1000 mg l^?1. The arsenic species were identified by using strong anion‐exchange high‐performance liquid chromatography–inductively coupled plasma mass spectrometry analysis after methanol/water (1 : 1) extraction. The majority (87–100%) of the extractable arsenic was still arsenate; arsenite was found to be between 1 and 6% of total extractable arsenic in the algae. In addition to dimethylarsinic acid, one unknown arsenical (almost co‐eluting with methylarsonic acid) and three different arsenosugars have been identified for the first time in C. vulgaris growing in a culture containing a mixture of antibiotics and believed to be axenic. The transformation to arsenosugars in the algae is not dependent on the arsenate concentration in the culture and varies between 0.2 and 5% of total accumulated arsenic. Although no microbiological tests for bacterial contamination were made, this study supports the hypothesis that algae, and not associated bacteria, produce the arsenosugars. Copyright © 2003 John Wiley & Sons, Ltd.     

Practical aspects of suppressed ion chromatography for cations in human serum

In spite of the good accuracy and precision of ion chromatographic methods for the determination of mono- and divalent cations in human serum, the major drawback with these methods were problems with the membrane suppressor's performance. Here, we described experiments undertaken to solve these problems. We address in particular the use of histidine-sulfuric acid eluents, sample purification with OnGuard-A cartridges and chromatographic “front-cut” for divalent cations. The latter two adaptations, resulting in removal of the anionic species from the sample, were successful in solving the observed suppressor problems. The eluent substitution, moreover, allowed us to switch from the chemical to the electric suppression mode. We believe that these adaptations will allow secure and robust determination of cations in human serum samples with ion chromatography.     

An absolute and relative rate study of the reaction of oh radicals with dimethyl sulfide

The gas phase reaction of OH radicals with dimethyl sulfide (CH₃SCH₃, DMS) has been studied using both an absolute and a relative technique at 295 ± 2 K and a total pressure of 1 atm. The absolute rate technique of pulse radiolysis combined with kinetic spectroscopy was applied. Using this technique a rate constant of (3.5 ± 0.2) × 10^?12 cm³ molecule^?1 s^?1 was obtained. For the relative rate method, rate constants for the reaction of OH with DMS were found to increase with increasing concentrations of added NO. These results are compared with the large body of kinetic and mechanistic data previously reported in the literature.     

Determination of eddy transport coefficients in thermo-lattice Boltzmann modeling of two-dimensional turbulence

Thermal Lattice Boltzmann (TLBE) techniques are used to consider the time evolution of free-decaying two dimensional (2D) turbulence induced by a double velocity shear layer. In particular, we consider the effect of this turbulence at a Reynolds number of 2555 on a strong temperature gradient. Since all structures are resolved on the 1024×1024 grid, the Smagorinsky model is employed to compute directly the eddy viscosity and eddy diffusivity. These transport coefficients play an integral part in large eddy simulations at very high Reynolds numbers where a direct simulation cannot resolve all excited scales. TLBE codes have the virtue of being readily extended to 3D, can readily handle nonperiodic geometries, and are ideally suited for multi-parallel computer architectures.This work was supported by a joint US-Czech DoE Grant #93066. Computations were performed under the auspices of the SPP (Special Parallel Processing) on the C90 at NERSC.     

Polygonizations of point sets in the plane

We examine the different ways a set ofn points in the plane can be connected to form a simple polygon. Such a connection is called apolygonization of the points. For some point sets the number of polygonizations is exponential in the number of points. For this reason we restrict our attention to star-shaped polygons whose kernels have nonempty interiors; these are callednondegenerate star-shaped polygons.We develop an algorithm and data structure for determining the nondegenerate star-shaped polygonizations of a set ofn points in the plane. We do this by first constructing an arrangement of line segments from the point set. The regions in the arrangement correspond to the kernels of the nondegenerate star-shaped polygons whose vertices are the originaln points. To obtain the data structure representing this arrangement, we show how to modify data structures for arrangements of lines in the plane. This data structure can be computed inO(n ⁴) time and space. By visiting the regions in this data structure in a carefully chosen order, we can compute the polygon associated with each region inO(n) time, yielding a total computation time ofO(n ⁵) to compute a complete list ofO(n ⁴) nondegenerate star-shaped polygonizations of the set ofn points.     

On n-hamiltonian graphs

A graph G of order p ? 3 is called n-hamiltonian, 0 ? n ? p ? 3, if the removal of any m vertices, 0 ? m ? n, results in a hamiltonian graph. A graph G of order p ? 3 is defined to be n-hamiltonian, ?p ? n ? 1, if there exists ?n or fewer pairwise disjoint paths in G which collectively span G. Various conditions in terms of n and the degrees of the vertices of a graph are shown to be sufficient for the graph to be n-hamiltonian for all possible values of n. It is also shown that if G is a graph of order p ? 3 and $\text{K}\text{(G) ? β(G) + n (?p ? n ? p ? 3)}$, then G is n-hamiltonian.     

Decomposition of a symmetric matrix

Summary An algorithm is presented to compute a triangular factorization and the inertia of a symmetric matrix. The algorithm is stable even when the matrix is not positive definite and is as fast as Cholesky. Programs for solving associated systems of linear equations are included.The authors gratefully acknowledge research support from NSF grant MCS75-06510, NSF grant MCS75-23333, and ONR contract N00014-69-A-0200-1017, respectively