Click assembly of dye-functionalized octasilsesquioxanes for highly efficient and photostable photonic systems

New hybrid organic–inorganic dyes based on an azide‐functionalized cubic octasilsesquioxane (POSS) as the inorganic part and a 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BDP) chromophore as the organic component have been synthesized by copper(I)‐catalyzed 1,3‐dipolar cycloaddition of azides to alkynes. We have studied the effects of the linkage group of BDP to the POSS unit and the degree of functionalization of this inorganic core on the ensuing optical properties by comparison with model dyes. The high fluorescence of the BDP dye is preserved in spite of the linked chain at its meso position, even after attaching one BDP moiety to the POSS core. The laser action of the new dyes has been analyzed under transversal pumping at 532 nm in both the liquid phase and when incorporated into solid polymeric matrices. The monosubstituted new hybrid dye exhibits high lasing efficiency of up to 56 % with high photostability, with its laser output remaining at the initial value after 4×10⁵ pump pulses in the same position of the sample at a repetition rate of 30 Hz. However, functionalization of the POSS core with eight fluorophores leads to dye aggregation, as quantum mechanical simulation has revealed, worsening the optical properties and extinguishing the laser action. The new hybrid systems based on dye‐linked POSS nanoparticles open up the possibility of using these new photonic materials as alternative sources for optoelectronic devices, competing with dendronized or grafted polymers.     

Building an empirical mass spectra library for screening of organic pollutants by ultra-high-pressure liquid chromatography/hybrid quadrupole time-of-flight mass spectrometry

Hybrid quadrupole time-of-flight mass spectrometry (QTOF MS) has gained wide acceptance in many fields of chemistry, for example, proteomics, metabolomics and small molecule analysis. This has been due to the numerous technological advances made to this mass analyser in recent years. In the environmental field, the instrument has proven to be one of the most powerful approaches for the screening of organic pollutants in different matrices due to its high sensitivity in full acquisition mode and mass accuracy measurements. In the work presented here, the optimum experimental conditions for the creation of an empirical TOF MS spectra library have been evaluated. For this model we have used a QTOF Premier mass spectrometer and investigated its functionalities to obtain the best MS data, mainly in terms of mass accuracy, dynamic range and sensitivity. Different parameters that can affect mass accuracy, such as lock mass, ion abundance, spectral resolution, instrument calibration or matrix effect, have also been carefully evaluated using test compounds (mainly pesticides and antibiotics). The role of ultra-high-pressure liquid chromatography (UHPLC), especially when dealing with complex matrices, has also been tested. In addition to the mass accuracy measurements, this analyser allows the simultaneous acquisition of low and high collision energy spectra. This acquisition mode greatly enhances the reliable identification of detected compounds due to the useful (de)protonated molecule and fragment ion accurate mass information obtained when working in this mode. An in-house empirical spectral library was built for approximately 230 organic pollutants making use of QTOF MS in MS(E) mode. All the information reported in this paper is made available to the readers to facilitate screening and identification of relevant organic pollutants by QTOF MS.     

Cellulose scaffolds modulated synthesis of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocrystals: preparation,characterization and properties

Magnetic Co₃O₄ nanoparticles were prepared by using microporous regenerated cellulose films as sacrificial scaffolds. The cellulose macromolecules and the porous structure of the films made them used as spatially confined reacting sites where Co(OH)₂ nanoparticles could be synthesized in situ. When the cellulose matrix was removed by sintering at 500 °C, Co₃O₄ nanoparticles were obtained. XRD and XPS indicated that the prepared nanoparticles were pure Co₃O₄ without any impurity. TEM and SEM images revealed that the particle size of the nanoparticles was smaller than 100 nm. The nanoparticles had weak ferromagnetic properties at 25 °C. Furthermore, the pronounced quantum confinement effects of the synthesized nanoparticles have been observed, the optical bandgap energies determined were about 1.92 ~ 2.12 and 2.74 ~ 2.76 eV for O²⁻ → Co³⁺ and O²⁻ → Co²⁺ charge-transfer processes, respectively. Furthermore, the resulted Co₃O₄ nanoparticles behaved stable electrochemical performance with promising applications in the electrode for lithium ion battery.     

In situ synthesis of plate-like Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles in porous cellulose films with obvious magnetic anisotropy

Nanocomposite cellulose films with obvious magnetic anisotropy have been prepared by in situ synthesis of plate-like Fe₂O₃ nanoparticles in the cellulose matrix. The influence of the concentrations of FeCl₂ and FeCl₃ solutions on the morphology and particle size of the synthesized Fe₂O₃ nanoparticles as well as on the properties of the composite films has been investigated. The Fe₂O₃ nanoparticles synthesized in the cellulose matrix was γ-Fe₂O₃, and its morphology was plate-like with size about 48 nm and thickness about 9 nm, which was totally different from those reported works. The concentration of FeCl₂ and FeCl₃ solution has little influence on the particle size and morphology of the Fe₂O₃ nanoparticles, while the content of Fe₂O₃ nanoparticles increased with the increase of the concentration of the precursor solution, indicating that porous structured cellulose matrix could modulate the growth of inorganic nanoparticles. The unique morphology of the Fe₂O₃ nanoparticles endowed the composite films with obvious magnetic anisotropy, which would expand the applications of the cellulose based nanomaterials.     

Properties of cellulose films prepared from NaOH/urea/zincate aqueous solution at low temperature

Cellulose films were successfully prepared from NaOH/urea/zincate aqueous solution pre-cooled to −13 °C by coagulating with 5% H₂SO₄. The cellulose solution and regenerated cellulose films were characterized with dynamic rheology, ultraviolet–visible spectroscope, scanning electron microscopy, wide angle X-ray diffraction, Fourier transform infrared (FT-IR) spectrometer, thermogravimetry and tensile testing. The results indicated that at higher temperature (above 65 °C) or lower temperature (below −10 °C) or for longer storage time, gels could form in the cellulose dope. However, the cellulose solution remained a liquid state for a long time at 0–10 °C. Moreover, there was an irreversible gelation in the cellulose solution system. The films with cellulose II exhibited better optical transmittance, high thermal stability and tensile strength than that prepared by NaOH/urea aqueous solution without zincate. Therefore, the addition of zincate in the NaOH/urea aqueous system could enhance the cellulose solubility and improve the structure and properties of the regenerated cellulose films.     

Rapid wide-scope screening of drugs of abuse, prescription drugs with potential for abuse and their metabolites in influent and effluent urban wastewater by ultrahigh pressure liquid chromatography-quadrupole-time-of-flight-mass spectrometry

In the present work, a rapid method with little sample handling has been developed for determination of 23 selected volatile organic compounds in environmental and wastewater samples. The method is based on headspace solid-phase microextraction (SPME) followed by gas chromatography coupled to tandem mass spectrometry (GC-MS/MS) determination using triple quadrupole analyzer (QqQ) in electron ionization mode. The best conditions for extraction were optimised with a factorial design taking into account the interaction between different parameters and not only individual effects of variables. In the optimized procedure, 4 mL of water sample were extracted using a 10 mL vial and adding 0.4 g NaCl (final NaCl content of 10%). An SPME extraction with carboxen/polydimethylsiloxane 75 μm fiber for 30 min at 50°C (with 5 min of previous equilibration time) with magnetic stirring was applied. Chromatographic determination was carried out by GC-MS/MS working in Selected Reaction Monitoring (SRM) mode. For most analytes, two MS/MS transitions were acquired, although for a few compounds it was difficult to obtain characteristic abundant fragments. In those cases, a pseudo selected reaction monitoring (pseudo-SRM) with three ions was used instead. The intensity ratio between quantitation (Q) and confirmation (q) signals was used as a confirmatory parameter. The method was validated by means of recovery experiments (n=6) spiking mineral water samples at three concentration levels (0.1, 5 and 50 μg L(-1)). Recoveries between 70% and 120% were generally obtained with relative standard deviations (RSDs) lower than 20%. The developed method was applied to surface water and wastewater from a wastewater treatment plant and from a municipal solid-waste treatment plant. Several compounds, like chloroform, benzene, trichloroethylene, toluene, tetrachloroethylene, dibromochloromethane, xylenes and bromoform were detected and confirmed in all the samples analyzed.     

A disposable electrochemical immunosensor for prolactin involving affinity reaction on streptavidin-functionalized magnetic particles

A novel electrochemical immunosensor was developed for the determination of the hormone prolactin. The design involved the use of screen-printed carbon electrodes and streptavidin-functionalized magnetic particles. Biotinylated anti-prolactin antibodies were immobilized onto the functionalized magnetic particles and a sandwich-type immunoassay involving prolactin and anti-prolactin antibody labelled with alkaline phosphatase was employed. The resulting bio-conjugate was trapped on the surface of the screen-printed electrode with a small magnet and prolactin quantification was accomplished by differential pulse voltammetry of 1-naphtol formed in the enzyme reaction using 1-naphtyl phosphate as alkaline phosphatase substrate. All variables involved in the preparation of the immunosensor and in the electrochemical detection step were optimized. The calibration plot for prolactin exhibited a linear range between 10 and 2000 ng mL(-1) with a slope value of 7.0 nA mL ng(-1). The limit of detection was 3.74 ng mL(-1). Furthermore, the modified magnetic beads-antiprolactin conjugates showed an excellent stability. The immunosensor exhibited also a high selectivity with respect to other hormones. The analytical usefulness of the immnunosensor was demonstrated by analyzing human sera spiked with prolactin at three different concentration levels.     

Using liquid crystals as a readout system in urinary albumin assays

Detecting human serum albumin (HSA) in urine samples is a standard procedure for the diagnosis of kidney problems and the prognosis of patients with chronic kidney diseases (CKDs). In this study, we developed a HSA assay by incorporating a thin layer of liquid crystals (LCs) as a readout system such that the presence of HSA in urine samples can be detected as optical signals. In combination with dilution protocols, this assay can be used to estimate the concentration range of HSA simply by counting the number of bright spots. Our results show that the assay can detect HSA at concentrations as low as 15 μg mL(-1). It is anticipated that this assay can provide a faster and simpler alternative for the diagnosis and prognosis of patients with kidney diseases.     

Fully automated determination of parabens, triclosan and methyl triclosan in wastewater by microextraction by packed sorbents and gas chromatography-mass spectrometry

A fully automated method for the determination of triclosan (TCS), its derivative methyl triclosan (MeTCS) and six parabens (esters of 4-hydroxybenzoic acid) including branched and linear isomers of propyl (i-PrP and n-PrP) and butyl paraben (i-BuP and n-BuP) in sewage water samples is presented. The procedure includes analytes enrichment by microextraction by packed sorbent (MEPS) coupled at-line to large volume injection-gas chromatography-mass spectrometry (LVI-GC-MS). Under optimised conditions, compounds were extracted from 2 mL samples, adjusted at pH 3, using a C18 MEPS-sorbent. Adsorbed analytes were eluted directly into the Programmable Temperature Vaporizer (PTV) injector of the chromatograph with 2×25 μL of ethyl acetate. They were quantified using standard solutions in ultrapure water submitted to the same sample enrichment process as real sewage water samples. After signal normalisation using isotopic labelled species as internal surrogates, no differences were noticed among the extraction efficiency for sewage and ultrapure water; moreover, the proposed method reported lineal calibration curves from 0.1 to 10 ng mL(-1), relative standard deviations (%RSD) between 2 and 7.1% and limits of detection (LODs) varying from 0.001 to 0.015 ng mL(-1) in ultrapure water and from 0.02 to 0.59 ng mL(-1) in the most complex sample (raw wastewater).