Addressing the metabolic activation potential of new leads in drug discovery: a case study using ion trap mass spectrometry and tritium labeling techniques

Metabolic activation of drug candidates to electrophilic reactive metabolites that can covalently modify cellular macromolecules may result in acute and/or idiosyncratic immune system-mediated toxicities in humans. This presents a significant potential liability for the future development of these compounds as safe therapeutic agents. We present here an example of an approach where sites of metabolic activation within a new drug candidate series were rapidly identified using online liquid chromatography/multi-stage mass spectrometry on an ion trap mass spectrometer. This was accomplished by trapping the reactive intermediates formed upon incubation of compounds with rat and human liver microsomes as their corresponding glutathione conjugates and mass spectral characterization of these thiol adducts. Based on the structures of the GSH adducts identified, potential sites and mechanisms of bioactivation within the chemical structure were proposed. These metabolism studies were interfaced with iterative structural modifications of the chemical series in order to block these bioactivation sites within the molecule. This strategy led to a significant reduction in the propensity of the compounds to undergo metabolic activation as evidenced by reductions in the irreversible binding of radioactivity to liver microsomal material upon incubation of tritium-labeled compounds with this in vitro system. With the efficiency and throughput achievable with such an approach, it appears feasible to identify and address the metabolic activation potential of new drug leads during routine metabolite identification studies in an early drug discovery setting.     

尼龙1010／尼龙6共聚物的表观相图研究

采用显微熔点法和ＤＳＣ测定了尼龙１０１０／尼龙６共聚物的表观相图；分析了投料比与链节结构单元含量的关系。最低熔点时尼龙１０１０／尼龙６的理论重量投料比为６０／４０，摩尔比为３３．３／６６．７，实验结果与此相近。     

La2O3/MgO催化剂上的甲烷氧化偶联

研究了甲烷在La_2O_3/MgO催化剂上的氧化偶联。发现制备过等对催化剂的行为有显著影响。比较了催化剂的反应性能和体相结构,表明在MgO上存在着三种La_2O_3的状态:高分散La_2O_3是最活泼的;La(OH)_3不太活泼;而呈六方晶相的La_2O_3晶粒活性最低。在催化剂中加入Na_2CO_3和K_2CO_3可以改进催化剂的活性和选择性。还考察了反应条件如温度和空速的影响。     

Analysis of the linkage positions and isomers of monosaccharide units in oligosaccharides by negativ secondary ion mass spectrometry in combination with the stereoselective reaction with substituted boronic acid

The negative secondary ion mass spectrometry, in combination with the stereoselective derivatizations with substituted boronic acid RB(OH)₂, was used in the analysis of fourteen oligosaccharides. The mass spectra of the derivatives provide information on their linkage positions and isomerism of the individual monosacaccharide units. The results indicated that among the derivatives of the oligosaccharides analyzed, those with 1–4 and 1–6 linkages all presented the ion peaks at m/z 287, sometimes one more peak at m/z 449. Furthermore, a relationship was found between the linkage positions and the intensity orders of the derivative ions. Finally, the derivatives of the disaccharides with a galactose presented an intense ion peak at m/z 347, and those of oligosaccharides with 1–6 linkage to a galactose at terminal presented the ion at m/z 317. In the case of oligosaccharides with a fructose residue, characteristic ion of m/z 155 was produced. The conditions of stereoselective derivatizations and mass spectrometry were studied, in order to obtain a better reproducibility of the mass spectra.     

Synthesis and in Vitro Evaluation of N-[[4-[2-(Carboxyl)-1-Cycloalken-1-yl]Phenyl]Methyl]Imidazoles as Nonpeptide Angiotensin II Receptor Antagonists

A series of nonpeptide angiotensin II receptor antagonists was synthesized via palladium-assisted cross coupling of aryl stannane and cycloalkenyl triflates and subsequent alkylation of silyl-protected imidazole. Our compounds, which have a terminal five- to seven-membered cycloalkenyl ring, are compared to DuPont EXP7711, an N-[(2′-carboxybiphenylyl)methyl]imidazole, which has a terminal phenyl moiety. Physicochemical properties of the compounds, such as lipophilicity, steric bulk, conformation, and the relative spatial proximity of the 2-carboxyl and the middle phenyl, are quantitated by computational chemistry. Potency in terms of binding affinity to AT₁ receptors in rat adrenal glomerulosa and rabbit aorta is maximized when the terminal ring is aromatic.     

Direct Trimethylsilylation of Phenanthrene and its Products—An Abnormal Silylation of Phenanthrene

Direct trimethylsilylation¹⁾ of phenanthrene in different molar ratio of phenanthrene/sodium/trimethylchlorosilane is reported and discussed. Instead of the aromatic silyl compounds, such as 9-trimethylsilylphenanthrene (V), the hydroaromatic silyl compounds, such as 9, 10–bis (trimethylsilyl)-9, 10-dihydrophenanthrene (I) were obtained preferentially. Structure of these compounds are characterized and discussed. These silylated products have a general trend to change their properties during long time storage in the atmosphere under exposure to light. A significant difference of chemical shifts between silylated aromatic compound (V) and silylated hydroaromatic compound (I-IV) was observed.     

FFC-1离子交换纤维对酸碱有害气体吸附性能的研究

系统考察了不同直径及反离子形式的FFC-1聚羧酸离子交换纤维对酸碱有害气体的穿透吸附,各种温、湿度条件下的吸水率,以及作为有害气体吸附滤除材料的重复使用与再生性能。研究表明:FFC-1纤维直径的减小有利于提高对有害气体的动态吸附容量。在体系温度、相对湿度分别为15℃、50%时,以3D腈纶为起始原料的钠型FFC-1离子交换纤维的吸水率≥350mg/g.纤维;对SO2的穿透吸附容量可达200mg/g.纤维。FFC-1离子交换纤维具有良好的重复使用与再生能力,经20次再生循环使用后,纤维交换容量未见明显变化。     

Novel metathesis catalysts based on ruthenium 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidenes: synthesis, structure, immobilization, and catalytic activity

The synthesis of novel ruthenium-based metathesis catalysts containing the saturated 1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene ligand, that is, [RuCl2(NHC)[=CH-2-(2-PrO)-5-NO(2)-C6H3]] (1) and [Ru(CF3COO)2(NHC)[=CH-2-(2-PrO)-5-NO2-C6H3]] (2) (NHC=1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) is described. Both catalysts are highly active in ring-closing metathesis (RCM) and ring-opening cross-metathesis (ROCM). Compound 1 shows moderate activity in enyne metathesis. Compound 2 is not applicable to enyne metathesis since it shows high activity in the cyclopolymerization of diethyl dipropargylmalonate (DEDPM). Poly(DEDPM) prepared by the action of 2 consists of 95% five-membered rings, that is, poly(cyclopent-1-enevinylene)s, and 5 % of six-membered rings, that is, poly(cyclohex-1-ene-3-methylidene)s. The polymerization proceeds in a nonliving manner and results in polyenes with broad polydispersities (1.9< or =PDI< or =2.3). Supported analogues of 2 were prepared by immobilization on hydroxymethyl-Merrifield resin and a monolithic support derived from ring-opening-metathesis polymerization (ROMP). Catalyst loadings of 1 and 2.5%, respectively, were obtained. Both supported versions of 2 showed excellent reactivity. With 0.24-2% of the supported catalysts, yields in RCM and ROCM were in the range of 76-100%. Leaching of ruthenium was low and resulted in Ru contaminations of the products of less than 0.000014% (0.14 ppm).     

Failure of elastomeric polymers due to rate dependent bond rupture

A new cohesive zone model is developed in order to study the mechanisms of adhesive and cohesive failures of soft rubbery materials. The fracture energy is estimated here using a strategy similar to that of Lake and Thomas (LT) by considering the dissipation of stored elastic energy followed by the extension and relaxation of polymer chains. The current model, however, departs from that of LT in that the force needed to break an interfacial bond does not have a fixed value; instead, it depends on the thermal state of the system and the rate at which the force is transmitted to the bond. While the force required to rupture a chain is set by the rules of thermomechanically activated bond dissociation kinetics, extension of a polymer chain is modeled within both the linear and nonlinear models of chain elasticity. Closed form asymptotic solutions are obtained for the dependence of crack propagation speed on the energy release rate, which are valid in two regimes: (I) slow crack velocity or short relaxation time for bond dissociation; (II) fast crack velocity or long relaxation time for bond dissociation. The rate independent and the zero temperature limit of this theory correctly reduces to the fracture model of LT. Detailed comparisons are made with a previous work by Chaudhury et al. which carried out an approximate analysis of the same problem.