The Unusual Spectrum of the Mixture of Tin-octabutoxy Naphthalocyanine and SnCl2 in CH2Cl2

The Q-band position of tin-centered 5, 9, 14, 18, 23, 27, 32, 36-octabutoxy 2, 3-phthalocyanine(SnNc(OBu)8) exhibits dramatic red-shift as mixed with SnCl2 in CH2Cl2.     

Mechanism of UV photoreactivity of alkylsiloxane self-assembled monolayers

A molecular level understanding of the photoreactivity of self-assembled monolayers (SAMs) becomes increasingly important as the spatial resolution starts to be limited by the size of the resist and the spatial extent of the photochemical reactions in photoresist micropatterning. To this end, a number of surface characterization techniques were combined to understand the reactive agents, reactive sites, kinetics, and reaction pathways in the UV photoreactivity of octadecylsiloxane (ODS) SAMs. Quantitative analysis of our results provides evidence that ground state atomic oxygen is the primary reactive agent for the UV degradation of ODS SAMs. UV degradation, which follows zero-order kinetics, results in the scission of alkyl chains instead of the siloxane headgroups. Our results suggest that the top of the ODS SAMs is the preferential reactive site. Using a novel, highly surface sensitive technique, fluorescence labeling of surface species, we identified the presence of submonolayer quantities chemical functional groups formed by the UV degradation. These groups are intermediates in a proposed mechanism based on hydrogen abstraction.     

二氧化钛光催化体系中的羟基自由基的测定

通过ESR光谱测定表明TiO2悬浮液在紫外光照射下产生羟基自由基氧化物种.羟基自由基氧化酸性桃红(sulforhodamine B,SRB)使其褪色,在565 nm处用分光光度法测定其吸光度值的变化,可间接测定羟基自由基的生成量.确定了体系的最佳实验条件pH为2.5;SRB浓度为2.0×10-5mol/L;TiO2浓度为0.1 g/L;光照时间为12 min.采用抗坏血酸为羟基自由基清除剂,测定了其自由基清除率,表明拟定该体系可作为筛选抗氧化剂的方法之一.     

Tertiary amine-mediated synthesis of microporous carbon membranes

Microporous carbon membranes were prepared on an -alumina support by a pyrolysis of cationic tertiary amine/anionic polymer composites. The precursor solutions contain a thermosetting resorcinol/formaldehyde (RF) polymer and a cationic tertiary amine. Three types of cationic tertiary amines with different chain lengths were used, such as tetramethlammonium bromide (TMAB), tetrapropylammonium bromide (TPAB) and cetyltrimethylammonium bromide (CTAB). A porous structure was produced by a decomposition of the amine and the resulting pores assisted the further gasification of the RF polymer at high temperature. The carbon/alumina membranes have thin and continuous carbon top layers with a thickness of 1 μm. Gas permeation tests were performed using single gases of CO₂, O₂, N₂, CF₄, n-C₄H₁₀ and i-C₄H₁₀, as well as binary mixtures of CH₄/n-C₄H₁₀ and N₂/CF₄ at different temperatures between 23 and 150 °C. The carbon membrane prepared using TMAB showed separation factors higher than 650 for the CH₄/n-C₄H₁₀ mixtures and higher than 8100 for the N₂/CF₄ mixture. From the permeation of pure gases with different molecular sizes, the pore sizes of the carbon membrane prepared using TMAB, TPAB and CTAB are estimated to be 4.0, 5.0 and larger than 5.5 Å, respectively, indicating that the micropore size of the carbon membranes is controllable by using different amines.     

Swelling kinetics and release characteristic of crosslinked chitosan: Polyether polymer network (semi-IPN) hydrogels

The aqueous swelling kinetics of a series of crosslinked chitosan (cr-CS) with glutaraldehyde (GA) interpenetrating polyether hydrogels have been studied as functions of pH, the N-deacetylation degree of chitosan, the amount of crosslinking agent, the electrolyte composition in solution, temperature, and gel composition. Based on these results, the swelling mechanism of the hydrogels was discussed. The release profiles of chlorhexidini acetas from the semi-IPN were also investigated. © 1994 John Wiley & Sons, Inc.     

富勒烯化聚环氧丙基咔唑的合成与表征

通过Ｆｒｉｅｄｅｌ－Ｃｒｒａｆｔｓ反应制备了富勒烯化的聚环氧丙基咔唑，聚合物中Ｃ６０的含量最高可达７．６ｗｔ％。通过凝胶渗透色谱法测定了聚合物分子量，并采用＾上Ｈ和＾１３Ｃ－ＮＭＲ，ＩＲ，热分析及光谱等手段对其结构进行了分析与表征。     

A comparative study on photo-induced electron transfer from fluorescein to anthraquinone and injection into colloidal TiO2

A dyad-anthraquinone-methyl ester of fluorescein-and its model compound-butyl ester-were synthesized. The effects of photo-induced electron transfer from fluorescein to an organic anthraquinone acceptor and injection into inorganic colloidal TiO(2) were studied respectively. It is found that the photo-induced electron transferring to an organic acceptor is much faster than injecting into inorganic colloidal particles when fluorescein was excited by visible light. While inorganic colloidal TiO(2) was excited by UV, the electron of fluorescein will inject into TiO(2).     

Nd—Al双金属活性体的组成及其对共轭双烯烃的聚合

稀土Ziegler-Natta催化剂活性体对双烯烃配位聚合的研究已有很多报道。作者曾从NdCl_3·3P_(350)~(**)-Al(i-Bu)_3体系分离出Nd-Al双金属活性体。本文从NdCl_3·3P_(350)-HAl(i-Bu)_2和Al(C_2H_5)_3反应体系中分离出一系列Nd-Al双金属活性体,用元素分析方法研究了这些活性体的组成,并综合考察了在无助催化剂AlR_3存在下从不同烷基铝获得的活性体本身对共轭双烯烃的定向聚合能力。 单体、溶剂、HAl(i-Bu)_2、Al(C_2H_5)_5及活性体的合成,聚合方法,聚合物表征均按文献[4]。     

π-二苯铬(O)催化聚合全氟丁炔-2

本文报道π-二苯铬(O)催化聚合全氟丁炔-2,得到白色粉末状的聚全氟丁炔-2。它不溶于任何溶剂,对浓硝酸、浓硫酸和浓碱十分稳定。热重分析、差热分析和差动扫描量热法分析的结果表明它在空气中非常稳定,470℃时尚不发生氧化分解。在空气中聚全氟丁炔-2的热裂解活化能为56.5千卡/克分子。当聚合反应在甲苯溶液中进行时,用气液色谱检测到从π-二苯铬(O)分子失掉的苯分子。我们初步推测了聚合反应的机理。     

基于核酸探针的光学传感方法和细胞成像研究

许多疾病的特征在于各种生物分子表现出的异常活性,这些物质通常在细胞内外显示过表达现象,因此对其灵敏靶向识别可以提供诊断和治疗效用。由于基因诊疗和化学传感技术的发展,用于灵敏检测细胞内外生物化学物质的核酸探针突显优势。核酸探针可以在稳定进入细胞的同时,特异性地结合目标物质,通过光学方法检测或通过成像技术标识出来。本文综述了采用光学传感方法和成像技术,基于核酸探针检测生物分子的新进展。根据检测对象进行分类,概括分析了几个代表性体系:核酸序列、蛋白质和酶、化学物质和物理化学条件,并详细阐述其关键设计原理、灵敏度及样品检测等结果,同时指出了各类核酸探针的优缺点。