Atomization of Al in a tungsten coil electrothermal atomic absorption spectrophotometer

Electrothermal atomic absorption spectrophotometry of Al in a tungsten coil atomizer was evaluated and applied for its determination in hemodialysis fluid. The system was mounted on a Varian Spectra AA-40 spectrophotometer with continuum background correction and all measurements, in peak height absorbance, were done at 309.3 nm. The purge gas was a mixture of 90% Ar plus 10% H(2). Observation height, gas flow, drying, pyrolysis and atomization steps were optimized. The heating program was carried out by employing a heating cycle in four steps: dry, pyrolysis, atomization and clean. The determination of Al in hemodialysis solutions was performed by using a matrix-matching procedure. Al in hemodialysis solutions was determined by TCA and by electrothermal atomization with a graphite tube atomizer. There is no differences between results obtained by both methods at a confidence level of 95%. The characteristic mass of Al by using the TCA was 39 pg and the detection limit was 2.0 mug l(-1).     

Determination of major and trace elements in crude oils by neutron activation and reflection methods

The concentrations of O, Na, Cl, V, Mn and Ni in crude oils of different origins were determined, using sampling (SNAA) and on-stream (ONAA) activation analyses. Samples were irradiated with thermal and fast neutrons produced by a 0.3 mg²⁵²Cf source and a 14 MeV generator. The H-content and the C/H atomic ratio have been determined by thermal neutron reflection method using an 18 GBq Pu−Be source. This work was supported in part by the Hungarian Academy of Sciences.     

Thermal Behaviour of some dioxane adducts ofM(C6F5)2 (M=Pd,Pt)

The thermal treatment of the pentafluorophenyl derivativesM(C₆F₅)₂Dx_n [M=Pd (n=2, 3) or Pt (n=2); Dx=dioxane] leads to the formation of the new dioxane adducts M(C₆F₅)₂Dx (M=Pd, Pt) and Pt(C₆F₅)₂Dx_1.5. Calculations of the order of reaction and the activation energy of some of the decomposition reactions are described. The values were determined by the Coats-Redfern and Freeman-Carroll methods. Structural data on the isolated intermediates were obtained by infrared spectroscopy and magnetic susceptibility measurements.

---

Zusammenfassung Die thermische Behandlung der PentafluorphenylderivateM(C₆F₅)₂Dx_n [M=Pd (n=2, 3) oder Pt (n=2); Dx=Dioxan] führt zu der Bildung der neuen DioxanaddukteM(C₆F₅)₂Dx (M=Pd, Pt) und Pt(C₆F₅)₂Dx_1.5. Die Berechnungen der Reaktionsordnung und der Aktivierungsenergie einiger Zersetzungsreaktionen werden beschrieben. Die Werte wurden durch die Methoden von Coats-Redfern und Freeman-Carroll bestimmt. Die Strukturangaben der isolierten Zwischenprodukte wurden durch Infrarotspektroskopie und Messung der magnetischen Suszeptibilität erhalten.

---

(₆F₅)₂, M=Pd n=2, 3 Pt _n=2, - , -M(C₆F₅)₂ (=Pd, Pt) (₆F₅)_21,5. , — —. .

     

Pyrylium-containing polymers as sensory materials for the colorimetric sensing of cyanide in water

A sensory polymeric material for the colorimetric sensing of cyanide in water has been developed based on the reactivity of this anion with the pyrylium cation.     

Entropy evaluation using the kinetic method: is it feasible?

The kinetic method is one of the most widely used experimental techniques for the measurement of thermochemical parameters by mass spectrometry. Recently it has been realized that it can also be used to determine reaction entropies, but the validity of this approach has not been established. This Perspective evaluates kinetic method plots in cases where there is a significant entropy difference between the competing fragmentation channels (i.e. between sample and reference compounds in the dissociating cluster ion). The concept underlying this study is to calculate mass spectra theoretically, based on known thermochemical parameters and as a function of experimental conditions. This can be done accurately using the RRKM-based MassKinetics software. The resulting mass spectra are then interpreted by the kinetic method, yielding DeltaH and DeltaS values. These values are, in turn, compared with the true values used to generate the calculated mass spectra. The results show that the reaction entropy difference between sample and reference has a very large influence on kinetic method plots. This should always be considered when studying energy-dependent mass spectra (using metastable ions or low- or high-energy collision-induced dissociation (CID)), even if only DeltaH is to be determined. Kinetic method plots are not strictly linear and this becomes a serious issue in the case of small molecules showing a large entropy effect. In such cases, results obtained at a low degree of excitation are more accurate. Energy and entropy effects can be evaluated in a relatively straightforward manner: first, the apparent Gibbs energy (DeltaG(app)) and effective temperature (T(eff)) are determined from kinetic method plots (intercept and slope, respectively), obtained from experiments using various degrees of excitation. Second, the resulting DeltaG(app) is plotted against T(eff), the slope yielding DeltaS while the intercept (extrapolation to zero temperature) yields DeltaH. This data evaluation yields more accurate results than alternative methods used in the literature. The resulting DeltaH values are fairly accurate, with errors, in most cases, <4 kJ mol(-1). On the other hand, DeltaS is systematically underestimated by 20-40%. Empirically scaling DeltaS values determined by the kinetic method by 1.35 results in a DeltaS value within 20% (or 10 J mol(-1) K(-1)) of the theoretical value.     

Direct determination of gallium on polyurethane foam by X-ray fluorescence

Gallium chloride is easily extracted from 6M HCl by comminuted polyether-type polyurethane foam. After the extraction step, the gallium absorbed by the PU foam can be quantitatively determined by X-ray fluorescence. A procedure for the direct determination of gallium absorbed by PU foam by XRFS is thus described. Gallium is determined at levels as low as 60 ng/ml (C(L)), with a calibration sensitivity of 424 cps ml/mug, within a linear range 0.1-2.30 mug/ml. The procedure investigated was successfully applied to determination of gallium in aluminum alloys, bauxite and industrial residue samples.     

Photodissociation dynamics of the Kr-HBr cluster: the effect of the rare gas atom substitution

The ultraviolet photolysis dynamics of Kr-HBr(v=0) is investigated by means of wave packet calculations, focusing on the fragmentation pathway Kr-HBr+ variant Planck's over 2pi omega-->H+Kr-Br. Photolysis is simulated by starting from two different cluster initial states, namely the ground van der Waals (vdW) and an excited vdW bending state, associated with the Kr-H-Br and Kr-Br-H isomers, respectively. The results show that, for the two initial states of the cluster, the Kr-Br product yield is lower than that of Ar-Br radicals found in previous studies on Ar-HBr photolysis. Despite this decrease, the Kr-Br yield is found to be still rather high, in particular for the initial excited vdW state of Kr-HBr(v=0). In addition, the Kr-Br product state distributions exhibit a remarkably higher excitation (mainly rotational) than the corresponding Ar-Br distributions. The lower yield and higher excitation of Kr-Br as compared to Ar-Br, are attributed to a larger share of the energy available for the radical going to internal excitation in the case of the Kr-Br product. The different partition of the energy available for Kr-Br also causes significant deviations in the photolysis behavior of Kr-HBr when compared to that of Ar-HBr, in the case of the initial excited vdW state of both clusters. A common feature of the photodissociation of Kr-HBr and Ar-HBr is the manifestation of quantum interference effects in the Kr-Br and Ar-Br rotational state distributions, in the form of pronounced structures of supernumerary rotational rainbows.     

A field theoretical approach to calculate electronic Born-Oppenheimer coupling terms

In this paper we suggest to consider the spatial distribution of the Born-Oppenheimer nonadiabatic coupling terms as fields which are created by sources, located at degeneracy points, and which can be derived using the ordinary mathematical tools of field theory. It is shown that the curl-divergence equations as formed within a given Hilbert space [M. Baer, Chem. Phys. Lett. 35, 112 (1975)] can be converted into a set of inhomogeneous coupled Poisson equations which are solved for a given set of boundary conditions. The method is applied to the three-state Hilbert subspace of the H(3) system. The numerical results are compared with ab initio calculations for which a very encouraging fit is found.     

Heterogeneous colorimetric sensor for mercuric salts

A novel chemical sensor for the colorimetric detection of mercuric salts is described. The sensor is based on a mesoporous nanocrystalline TiO2 film sensitised with a ruthenium dye; immersion of this film in an aqueous solution of Hg2+ results in a rapid colorimetric response, with both a high selectivity and a sub-micromolar sensitivity.