Selective hydrogenations of steroids catalyzed by heterogenized Ru complexes

Summary [RuCl₂(PPh₃)₃], [{RuCl₂(TPPMS)₂}₂] and their heterogenized analogs were applied in the selective hydrogenation of 17-keto- and α,β-unsaturated ketosteroids. In basic conditions these complexes selectively hydrogenated the C=O bonds, similarly to the results obtained in the case of α,β-unsaturated aldehydes. A new method was developed for the synthesis of an expensive steroid alcohol, which can be prepared traditionally in a more complicated way.     

Electrokinetic molecular separation in nanoscale fluidic channels

This report presents a study of electrokinetic transport in a series of integrated macro- to nano-fluidic chips that allow for controlled injection of molecular mixtures into high-density arrays of nanochannels. The high-aspect-ratio nanochannels were fabricated on a Si wafer using interferometric lithography and standard semiconductor industry processes, and are capped with a transparent Pyrex cover slip to allow for experimental observations. Confocal laser scanning microscopy was used to examine the electrokinetic transport of a negatively charged dye (Alexa 488) and a neutral dye (rhodamine B) within nanochannels that varied in width from 35 to 200 nm with electric field strengths equal to or below 2000 V m-1. In the negatively charged channels, nanoconfinement and interactions between the respective solutes and channel walls give rise to higher electroosmotic velocities for the negatively charged dye than for the neutral dye, towards the negative electrode, resulting in an anomalous separation that occurs over a relatively short distance (<1 mm). Increasing the channel widths leads to a switch in the electroosmotic transport behavior observed in microscale channels, where neutral molecules move faster because the negatively charged molecules are slowed by the electrophoretic drag. Thus a clear distinction between "nano-" and "microfluidic" regimes is established. We present an analytical model that accounts for the electrokinetic transport and adsorption (of the neutral dye) at the channel walls, and is in good agreement with the experimental data. The observed effects have potential for use in new nano-separation technologies.     

Surface activity of thymol: implications for an eventual pharmacological activity

In the present work, we studied the ability of thymol to affect the organization of model membranes and the activity of an intrinsic membrane protein, the GABA(A) receptor (GABA(A)-R). In this last aspect, we tried to elucidate if the action mechanism of this terpene at the molecular level, involves its binding to the receptor protein, changes in the organization of the receptor molecular environment, or both. The self-aggregation of thymol in water with a critical micellar concentration approximately = 4 microM and its ability to penetrate in monomolecular layers of soybean phosphatidylcholine (sPC) at the air-water interface, even at surface pressures above the equilibrium, lateral pressure of natural bilayers were demonstrated. Thymol affected the self-aggregation of Triton X-100 and the topology of sPC vesicles. It also increased the polarity of the membrane environment sensed by the electrochromic dye merocyanine. A dipolar moment of 1.341 Debye was calculated from its energy-minimized structure. Its effect on the binding of [3H]-flunitrazepam ([3H]-FNZ) to chick brain synaptosomal membranes changed qualitatively from a tendency to the inhibition to a clear activatory regime, up on changing the phase state of the terpene (from a monomeric to a self-aggregated state). Above its CMC, thymol increased the affinity of the binding of [3H]-FNZ (K(d-control)= 2.9, K(d-thymol)= 1.7 nM) without changing the receptor density (B(max-control)= 910, B(max-thymol)= 895 fmol/mg protein). The activatory effect of thymol on the binding of [ [3H]-FNZ was observed even in the presence of the allosteric activator gamma-aminobutyric acid (GABA) at a concentration of maximal activity, and was blocked by the GABA antagonist bicuculline. Changes in the dipolar arrangement and in the molecular packing of GABA(A)-R environment are discussed as possible mediators of the action mechanism of thymol.     

Characterization of ion-implanted silicion by Rutherford backscattering spectrometry and ellipsometry

It is demonstrated that the information obtained by Rutherford backscattering spectrometry and channeling technique can substantially help in the construction of a realistic optical model for the ellipsometry of ion-implanted silicon. In the case of fully amorphous ion-bombarded layers, the ellipsometry is a fast, non-destructive and contactless method to estimate the thickness of these films. For buried and partially disordered layers a qualitative interpretation of different trajectories in the - plance can be given on the basis of channeling measurements.     

Prediction of the net retention volumes in gas chromatography using porous polymers coated with different stationary phases

Summary A new expression which permits the prediction of the net retention volumes in gas chromatography with column packings of coated porous polymers is reported. The porous polymers Chromosorb 101 and Chromosorb 102 were used as supports and squalane, Ethofat and Carbowax 20M as stationary phases at three different column temperatures of 80°C, 100°C and 150°C. Several organic compounds of various polarity were used as test compounds and the net retention volumes, V_Ntheor, have been calculated according to this new expression. The V_Ntheor values were compared with the experimental net retention volumes, V_Nexp, and it was found that the difference between these two values is dependent on the type of compound and column packing. Nevertheless, the elution order could be predicted in most cases.     

Dehydration and crystallization process in sol-gel zirconia

Sol-gel zirconia was characterized using high-resolution thermogravimetry (Hi-Res TG) and differential scanning calorimetry (DSC) and compared with X-ray diffraction, Raman scattering, and UV-Vis spectroscopy. ZrO_2-x(OH)_2x·yH₂O annealed below 400°C show typical behavior of amorphous material. As the annealing temperature is increased, the tetragonal and monoclinic phases crystallize. Typical Hi-Res TG curve shows that the samples are continuously dehydrated in a long temperature range, between room temperature and 600°C. The total mass loss relative to the initial mass is of about 29%. The DSC analysis coupled with TG and structural information, indicate that the exothermic processes about 355 and 447°C can be related to the nucleation process of the formation of tetragonal zirconia, with bulk crystallization at 447°C. This revised version was published online in July 2006 with corrections to the Cover Date.     

Inter- and intramolecular potential for the N-formylglycinamide-water system. A comparison between theoretical modeling and empirical force fields

An intramolecular NEMO potential is presented for the N-formylglycinamide molecule together with an intermolecular potential for the N-formylglycinamide-water system. The intramolecular N-formylglycinamide potential can be used as a building block for the backbone of polypeptides and proteins. Two intramolecular minima have been obtained. One, denoted as C5, is stabilized by a hydrogen bonded five member ring, and the other, denoted as C7, corresponds to a seven membered ring. The interaction between one water molecule and the N-formylglycinamide system is also studied and compared with Hartree-Fock SCF calculations and with the results obtained for some of the more commonly used force fields. The agreement between the NEMO and SCF energies for the complexes is in general superior to that of the other force fields. In the C7 region the surfaces obtained from the intramolecular part of the commonly used force fields are too flat compared to the NEMO potential and the ab initio calculations. We further analyze the possibility of using a charge distribution obtained from one conformation to describe the charge distribution of other conformations. We have found that the use of polarizabilities and generic dipoles can model most of the changes in charge density due to the different geometry of the new conformations, but that one can expect additional errors in the interaction energies that are of the order of 1 kcal/mol.     

Apparent molar volumes,heat capacities,and molecular excluded volumes of methylated,hydroxy and methoxy derivatives of 1-methylcytosine in aqueous solutions at 25°C

Densities and specific heat capacities of aqueous solutions: 1-methylcytosine; 1-methyl-N⁴-hydroxycytosine; 1,5-dimethylcytosine; I,N⁴-dimethylcytosine; 1,5-dimethyl-N⁴-hydroxycytosine; 1-methyl-N⁴-methoxycytosine; 1,N⁴,N⁴-trimethylcytosine, 1,5-dimethyl-N⁴-methoxycytosine were determined using flow calorimetry and flow densimetry at 25°C. Apparent molar volumes and heat capacities were then determined. Molecular excluded volumes were evaluated. A relationship was found between the values of the increments in partial molar values and the kind of groups substituted. Four types of contributions were distinguished: substitution of hydrogen on C, N, and O (in OH group on N4) atoms by CH₃ group and replacement of hydrogen on N4 atom by OH group. The correlation between the experimental partial molar volumes and calculated molecular excluded volumes was also elaborated.     

Determination of Mn,Fe, Cu,Zn, and Pb in particulate matter,raw and final materials of a brick factory by radionuclide X-ray fluorescence analysis

Radionuclide X-ray fluorescence method with a Si/Li semiconductor detector and²³⁸Pn exciting source was used in the study of Mn, Fe, Cu, Zn, and Pb content of solid emissions, raw and final materials of a brick factory. From the point of view of metal content, the working environment of the brick factory is safe for workers.     

Solid-phase extraction-liquid chromatography-fluorimetry for organotin speciation in natural waters

Summary A method is reported for the determination of dibutyltin (DBT), diphenyltin (DPhT), tributyltin (TBT), and triphenyltin (TPhT) species at the nanogram per litre concentration level in natural water samples. Analytes were isolated from samples by solid-phase extraction and analysed both off-line and on-line by reversed-phase high-performance liquid chromatography with post-column derivatization and fluorimetric detection. Several SPE cartridges and eluents were evaluated; C₁₈ enrichment and elution with a mixture of methanol, acetic acid, and water was found most suitable. Preconcentration factors up to 250 can be achieved when a 500-mL sample is processed. Detection limits, recovery rates, and the precision of the whole process have been determined. The method has been applied to the determination of organotin species in spiked natural water samples collected on the NW Mediterranean coast. Recovery rates range from 75 to 110% and detection limits are at the low ng L⁻¹ level (1–3 ng Sn L⁻¹ for DPhT, DBT, and PhT and 40 ng Sn L⁻¹ for TBT when 250 mL spiked sea water is processed.)