Improving MCM‐41 as a Nitrosamines Trap through a One‐Pot Synthesis

Copper oxide was incorporated into MCM‐41 by a one‐pot synthesis under acidic conditions to prepare a new mesoporous nitrosamines trap for protection of the environment. The resulting composites were characterized by XRD, N₂ adsorption–desorption, and H₂ temperature‐programmed reduction techniques, and their adsorption capabilities were assessed in the gaseous adsorption of N‐nitrosopyrrolidine (NPYR). The adsorption isotherms were consistent with the Freundlich equation. The copper salt was deposited onto MCM‐41 during the evaporation stage and was fixed on the host in the calcination process that followed. MCM‐41 was able to capture NPYR in air below 373 K but not at 453 K. Loading of copper oxide on MCM‐41 greatly improved its adsorption capability at elevated temperatures. The influence of the incorporation of copper into MCM‐41 samples and the adsorption behavior of these samples are discussed in detail.     

流动注射微柱预分离富集荧光光度法测定肥料中的铈

用抗坏血酸将Ce(Ⅳ)还原为Ce(Ⅲ),以多聚磷酸钠作为增强剂,建立了铈的流动注射荧光分析法,考查了各种因素对测定Ce的影响.此方法线性范围为2.0×10-9～1.2×10-8 g·ml-1.采用流动注射微柱预分离富集测定了GBW07602标样和氨基酸微肥中的铈含量.测定结果与推荐值有良好的一致性.     

La-Ba系氧化物催化剂用于甲烷氧化偶联

以La_2O_3为基础,碱土金属作为第二组分的二元氧化物催化剂均具有较高的生成C_2活性,特别是La-Ba-O系催化剂具有优良的甲烷氧化偶联活性和稳定性,当La/Ba原子比为2.5时,C_2收率可达20.3％。第三组分的添加有助于提高C_2选择性,特别是添加碱金属,可以抑制完全氧化反应,并提高乙烯/乙烷比。在La:Ba:Na=2.5:1:0.1的催化剂上进行了500/小时的寿命实验,在整个反应期间,催化剂的活性和选择性相当稳定。X-射线物相分析表明,新鲜催化剂除有少量的碳酸钡外,主要是氧化镧和氧化钡的混合物。500小时后的物相基本上是氧化镧和碳酸钡。使用前后催化剂的比表面积及表面La和Ba的分布均无改变。较高的CH_4/O_3比对提高C_2选择性有利,当CH_4:O_2=4:1时,C_2选择性和收率分别为65.1％和19.1％。     

“化学在抗击新冠肺炎疫情中扮演的重要角色”专题教学

Considering COVID-19 epidemic prevention and control, education materials were excavated and refined, such as chemical disinfectants, typical drugs used in clinical treatment or trial and materials for preparation of medical protective equipment. We have carried out thematic teaching on "The important role of chemistry in the fight against COVID-19 epidemic", and integrated ideological and political education into the thematic teaching. Through thematic teaching, we can make students feel the charm of chemistry subject, stimulate students' interest in learning chemistry, fully mobilize students' learning enthusiasm and initiative, strengthen students' confidence and courage to overcome difficulties, cultivate the students' professional disciplines literacy and scientific literacy, activate students' love for the motherland, the people and the Communist Party of China.     

聚对羟基苯甲酸酯分子量分布的理论研究

本文从理论上研究了聚对羟基苯甲酸酯(简称PHB或PHBA)的分子量分布。理论分析表明,由对羟基苯甲酸酯缩聚制得的PHB的分子量分布与Flory分布稍有不同,可以认为是修正的Flory分布;而由对羟基苯甲酸制得的PHBA仍可用Flory分布表征。由于未发现上述聚合物的溶剂,故不可能对其分子量分布进行实验研究。     

用θ-2θ型衍射仪测定溶液结构的新方法

叙述了用θ－２θ型Ｘ射线衍射仪精确测定电解质溶液结构的新实验技术。设计制作了具有恒温功能的超厚液体样品池，并建立了样品池窗口强度的校正方法。优化了液体Ｘ射线衍射数据和结构参数精细化的计算机程序，获得了非常令人满意的实验结果。由θ－２θ型Ｘ射线衍射仪精确测定的径向分布函数与θ－θ型衍射仪自由散射比较，表明ＤＲＦ分辨率有所提高。     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

Thermal and autoxidation reactions of poly-3-methylenecyclobutene and poly-1-methyl-3-methylenecyclobutene

The thermal ring-opening reactions, autoxidation and hydrogenation of polymethy-lenecyclobutene (PMCB) and poly-1-methyl-3-methylenecyclobutene (PMMCB), were investigated. Both polymers were prepared by cationic polymerization and consisted almost entirely of 1,5-repeating units containing cyclobutene rings in the polymer backbone. Both polymers showed well behaved exothermic processes at elevated temperatures which apparently resulted in crosslinking. These processes were investigated by differential scanning calorimetry and interpreted to involve thermal ring-opening reactions. Autoxidation occurred very rapidly in PMCB but much more slowly in PMMCB as predicted by Bolland's rules. Attempts to hydrogenate the cyclobutene rings in both polymers resulted in the occurrence of hydrogenolysis in PMCB and little or no reaction with PMMCB for a Pd-catalyzed reaction and partial hydrogenation of the latter for a diimide reaction.     

Direct qualitative analysis of triacylglycerols by electrospray mass spectrometry using a linear ion trap

Triacylglycerols (TAGs) isolated from a biological sample provide a challenge for mass spectrometric analysis because of the complexity of naturally occurring TAGs, which may contain different fatty acyl substituents resulting in a large number of molecular species having the identical elemental composition. We have investigated the use of mass spectrometry to obtain unambiguous information as to the individual TAG molecular species present in a complex mixture of triacylglycerols using a linear ion trap mass spectrometer. Ammonium adducts of TAGs, [M+NH4]+, were generated by electrospray ionization, which permitted the molecular weight of each TAG molecular species to be determined. The mechanisms involved in the decomposition of the [M+NH4]+ and subsequent fragment ions were investigated using deuterium labeling, MS/MS, and MS3 experiments. Collision induced decomposition of [M+NH4]+ ions resulted in the neutral loss of NH3 and an acyl side-chain (as a carboxylic acid) to generate a diacyl product ion. MS/MS data were used to identify each acyl group present for a given [M+NH4]+ ion, and this information could be combined with molecular weight data to identify possible TAG molecular species present in a biological extract. Subsequent MS3 experiments on the resultant diacyl product ions, which gave rise to acylium (RCO+) and related ions, enabled unambiguous TAG molecular assignments. These strategies of MS, MS/MS, and MS3 experiments were applied to identify components within a complex mixture of neutral lipids extracted from RAW 264.7 cells.     

Stability and structure of Li(n)H molecules (n=3-6): experimental and density functional study

The molecules Li(3)H and Li(4)H have been identified in mass-spectrometric measurements over solutions of hydrogen in liquid Li, and the gaseous equilibria of the reactions: Li(3)H+Li=Li(2)H+Li(2), Li(3)H+Li(2)=Li(2)H+Li(3), Li(3)H+Li=LiH+Li(3), Li(3)H+LiH=2Li(2)H, and Li(4)H+Li(2)=Li(3)H+Li(3) have been measured. Density functional calculations of Li(n)H molecules (n=3-6) provide structures, vibrational frequencies, ionization energies, and free energy functions of these molecules, and these are used to estimate the enthalpies of these reactions and the atomization energies of Li(3)H (119.4 kcal/mol) and Li(4)H (151.8 kcal/mol).