Electromagnetic transmission in configurations composed of two one-dimensional perfect electric conductor metal gratings

We study transmission properties in configurations composed of two single metal gratings with different thicknesses. Choosing the perfect electric conductor excludes the influence of intrinsic material dispersion on transmission behaviors; and as such, we aim to reveal the contribution of geometric dispersion to electromagnetic transmission. Transmission suppression line, instead of a transmission suppression point, is discovered, denoting the curve of the wavelength versus the interval or the lateral displacement between the two single gratings when the transmission suppression appears. A simplified model is proposed to comprehend the underlying physics of this special phenomenon.     

Analysis on skin-effect of a polymer shielded push–pull directional coupler electro-optic switch

By using the extended point-matching method, coupled mode theory, and electro-optic modulation theory, design and optimization are carried out for a polymer shielded push–pull directional coupler electro-optic switch. A novel technique and the relative formulas are presented for analyzing the influences of the skin-effect on the microwave characteristic parameters and the switching performances. Simulation results show that the voltages of the cross- and bar-states are 0 and ±2.93 V, respectively, and the coupling length is 4.139 mm. Considering the influences of the skin-effect, the cutoff switching frequency is 172 GHz, the insertion loss is in the range of 1.920–1.975 dB, the crosstalk is less than ?20 dB, and the switching time is 31.18–31.40 ps within the range of the switching frequency from 0.72 to 172 GHz. The designed switch exhibits superior characteristics including good impedance match, low switching voltage, and high cutoff switching frequency.     

Compressibility and isotope effect of fluid hydrogen

The calculations of the P-V isotherms, Hugoniots, dissociation and ionization degrees of fluid (liquid) hydrogen isotopes have been performed by using the self-consistent fluid variational theory under isothermal and shock compression. The isotope effect of fluid hydrogen was discussed. The present results are compared with the available experiments and calculations.     

Chemiluminescence resonance energy transfer in the luminol-CdTe quantum dots conjugates

The luminol-CdTe quantum dots (QDs) conjugates were prepared through the reaction between -NH₂ and -COOH. The resonance energy transfer between chemiluminescence donor (luminol-H₂O₂ system) and quantum dots (QDs, with different emission peaks) acceptors (CRET) was investigated. The luminescence of QDs in luminol-QDs conjugates in the process of CRET was influenced by the molar ratio of luminol/QDs. It could reach higher luminescence intensity while the luminol/QDs value was 1/1. Quantum yield of QDs and overlapping areas between the emission spectrum of luminol and adsorption spectrum of QDs played important roles in the CRET efficiency of luminol-QDs conjugates. The higher CRET efficiency (21.2%) was observed when the 540 nm QDs were used as acceptors. This work will offer helpful knowledge for the CRET studies based on QDs.     

Rovibrational spectrum of the Ne-N2O van der Waals complex in the 1285 cm region

The rovibrational spectrum of the Ne-N₂O van der Waals complex has been recorded in the symmetric stretching mode region of the N₂O monomer (∼1285 cm⁻¹) using a tunable diode laser spectrometer in conjunction with an astigmatic multi-pass cell and a pulsed supersonic slit jet. The spectra of both ²⁰Ne-N₂O and ²²Ne-N₂O isotopomers are assigned and analyzed using a Watson S-reduced asymmetric-rotor Hamiltonian. The rotational and centrifugal constants for the excited vibrational state are accurately determined. The band-origin of the spectrum is determined to be ν₀ = 1285.12251(18) cm⁻¹ for ²⁰Ne-N₂O and 1285.12363(27) cm⁻¹ for ²²Ne-N₂O, which shows a blue-shift of 0.21921 cm⁻¹ for ²⁰Ne-N₂O and 0.22033 cm⁻¹ for ²²Ne-N₂O from that of the N₂O monomer, respectively.     

Skin-effect analysis of a shielded polymer Y-fed coupler electro-optic modulator over a wide bandwidth of 94 GHz

A novel technique and related formulations are proposed for analyzing the influences of the skin-effect on the performances of a polymer Y-fed coupler electro-optic modulator with shielded push-pull micro-strip electrodes. Using the extended point-matching method, coupled mode theory and electro-optic modulation theory, thorough design and optimization are performed. By introducing the effective applied voltage, formulas of the high-frequency response under skin-effect are deduced, and characteristics under skin-effect are analyzed. Under the central wavelength of 1550 nm, the half-wave voltage is as low as 1.097 V for the device with an active region length about 8.884 mm. Considering the influences of the skin-effect, the 3-dB modulating bandwidth of the microwave signal is up to 94 GHz. A high extinction ratio of more than 20 dB and a low insertion loss of less than 4.18 dB are achieved when the microwave frequency is below 68 GHz under skin-effect. This design technique is proven to be accurate by the comparison with the beam propagation method (BPM).     

Large-aperture double-focus laser collimator for PAT performance testing of inter-satellite laser communication terminal

A laser collimator is necessary for testing and verification of the pointing, acquisition and tracking (PAT) performance of inter-satellite laser communication terminals on the ground. The laser collimator must have a large clear aperture to fit the PAT performance testing system. The PAT subsystem has a large field of view for the acquisition and a high angular accuracy for the fine tracking. To resolve the conflict between large field of view and fine angular resolution, a large-aperture double-focus laser collimator is proposed and its optical design and mechanical structure are described. The collimator mainly consists of a primary lens, a reflector, a beam-splitting plate, a secondary lens, two compensating lenses, two imaging sensors and a laser. The primary lens directly forms the long focal length arm of the collimator. The combination of the primary lens and the secondary lens form the short focal length arm of the collimator. The collimator has an angular resolution <0.75 μrad and a 10 mrad field of view. For the collimator, the incident beam is focused on the two imaging sensors by its two arms, and the beam emitted from the laser is collimated and transmitted. The collimator is combined with an optical scanner and a fine beam deflector to test and verify the PAT performance of the inter-satellite laser communication terminal in a full physical manner.     

Growth of SnO2 nanoparticles via thermal evaporation method

Tin oxide (SnO₂) nanoparticles were fabricated by evaporation of Sn powers at 1000 °C in air pressure. The as-deposited SnO₂ particles were single crystal structure, which were mostly spherical shape, the diameter of particles was ranging from 200 to 600 nm. The photoluminescence (PL) spectrum showed that a sharp emission peak at around 393 nm with the excitation wavelength at 325 nm, which suggested possible applications in nanoscaled optoelectronic devices. It was also found that the holding time affects the morphology of the products. The formation mechanism of SnO₂ particles was discussed.     

The multiferroic properties of Bi(Fe0.95Co0.05)O3 films

Bi(Fe_0.95Co_0.05)O₃ films were prepared on conductive indium tin oxide (ITO)/glass substrates by chemical solution deposition. Well saturated polarization hysteresis loop has been observed with a remnant polarization value of about 22 μC/cm² at room temperature. Weak ferromagnetism with saturation magnetization of about 3 emu/cm³ was observed at room temperature. The clear observation of both room temperature ferroelectric and ferromagnetic properties suggests the potential multiferroic applications of Bi(Fe_0.95Co_0.05)O₃.