Polyethylene imine derivatives ('synzymes') accelerate phosphate transfer in the absence of metal

The efficient integration of binding, catalysis, and multiple turnovers remains a challenge in building enzyme models. We report that systematic derivatization of polyethylene imine (PEI) with alkyl (C(2)-C(12)), benzyl, and guanidinium groups gives rise to catalysts ('synzymes') with rate accelerations (k(cat)/k(uncat)) of up to 10(4) for the intramolecular transesterification of 2-hydroxypropyl-p-nitrophenyl phosphate, HPNP, in the absence of metal. The synzymes exhibit saturation kinetics (K(M) approximately 250 microM, k(cat) approximately 0.5 min(-1)) and up to 2340 turnovers per polymer molecule. Catalysis can be specifically and competitively inhibited by anionic and hydrophobic small molecules. The efficacy of catalysis is determined by the PEI derivatization pattern. The derivatization reagents exert a synergistic effect, i.e., their combinations increase catalysis by more than the sum of each single modification. The pH-rate profile for k(cat)/K(M) is bell shaped with a maximum at pH 7.85 and can be explained as a combination of two effects that both have to be operative for optimal activity: K(M) increases at high pH due to deprotonation of PEI amines that bind the anionic substrate and kcat decreases as the availability of hydroxide decreases at low pH. Thus, catalysis is based on substrate binding by positively charged amine groups and the presence of hydroxide ion in active sites in an environment that is tuned for efficient catalysis. Inhibition studies suggest that the basis of catalysis and multiple turnovers is differential molecular recognition of the doubly negatively charged transition state (over singly charged ground state and product): this contributes a factor of at least 5-10-fold to catalysis and product release.     

Comparison of in vitro breast cancer visibility in analyser‐based computed tomography with histopathology,mammography, computed tomography and magnetic resonance imaging

High‐resolution analyser‐based X‐ray imaging computed tomography (HR ABI‐CT) findings on in vitro human breast cancer are compared with histopathology, mammography, computed tomography (CT) and magnetic resonance imaging. The HR ABI‐CT images provided significantly better low‐contrast visibility compared with the standard radiological images. Fine cancer structures indistinguishable and superimposed in mammograms were seen, and could be matched with the histopathological results. The mean glandular dose was less than 1 mGy in mammography and 12–13 mGy in CT and ABI‐CT. The excellent visibility of in vitro breast cancer suggests that HR ABI‐CT may have a valuable role in the future as an adjunct or even alternative to current breast diagnostics, when radiation dose is further decreased, and compact synchrotron radiation sources become available.     

Radiation dose and image quality in K‐edge subtraction computed tomography of lung in vivo

K‐edge subtraction computed tomography (KES‐CT) allows simultaneous imaging of both structural features and regional distribution of contrast elements inside an organ. Using this technique, regional lung ventilation and blood volume distributions can be measured experimentally in vivo. In order for this imaging technology to be applicable in humans, it is crucial to minimize exposure to ionizing radiation with little compromise in image quality. The goal of this study was to assess the changes in signal‐to‐noise ratio (SNR) of KES‐CT lung images as a function of radiation dose. The experiments were performed in anesthetized and ventilated rabbits using inhaled xenon gas in O₂ at two concentrations: 20% and 70%. Radiation dose, defined as air kerma (K_a), was measured free‐in‐air and in a 16 cm polymethyl methacrylate phantom with a cylindrical ionization chamber. The dose free‐in‐air was varied from 2.7 mGy to 8.0 Gy. SNR in the images of xenon in air spaces was above the Rose criterion (SNR > 5) when K_a was over 400 mGy with 20% xenon, and over 40 mGy with 70% xenon. Although in human thorax attenuation is higher, based on these findings it is estimated that, by optimizing the imaging sequence and reconstruction algorithms, the radiation dose could be further reduced to clinically acceptable levels.     

Modification of hardwood dissolving pulp with purifiedTrichoderma reesei cellulases

Hardwood dissolving pulp was treated with purified Trichoderma reesei endoglucanases and cellobiohydrolases. Endoglucanases were more efficient in hydrolysing pulp carbohydrates than were the cellobiohydrolases at the same protein dosage. Endoglucanases also lowered the viscosity and improved the alkaline solubility more dramatically. There was a clear correlation between the alkaline solubility and viscosity, and therefore the solubility could only be improved by lowering the viscosity of the pulp. At the same degree of cellulose degradation, endoglucanase II was found to be most effective in reducing the viscosity and thus improving the solubility. Cellobiohydrolases had a less pronounced effect on the viscosity or solubility.     

Biocatalytic enantioselective preparation of phenothiazine-based cyanohydrin acetates: kinetic and dynamic kinetic resolution

Dynamic kinetic resolution is used for the preparation of a series of novel (+)-10-alkyl-phenothiazin-3-ylcyanomethyl acetates. The method exploits a basic resin both for the racemization and formation of phenothiazine-based cyanohydrins and for the decomposition of acetone cyanohydrin in one pot together with Candida antarctica lipase A-catalyzed enantioselective acylation with vinyl acetate in acetonitrile. The Candida antarctica lipase A-catalyzed methanolysis of racemic 10-alkyl-phenothiazin-3-ylcyanomethyl acetates in acetonitrile with E?100 leads to the corresponding (−)-acetates.     

Polystyrene latex particles coated with crosslinked poly(N-isopropylacrylamide)

Thermoresponsive colloidal particles were prepared by seeded precipitation polymerization of N-isopropylacrylamide (NIPAM) in the presence of a crosslinking monomer, N,N-methylenebisacrylamide (MBA), using polystyrene latex particles (ca. 50 nm in diameter) as seeds in aqueous dispersion. Phase transitions of the prepared poly(N-isopropylacrylamide), PNIPAM, shells on polystyrene cores were studied in comparison to colloidal PNIPAM microgel particles, in H₂O and/or in D₂O by dynamic light scattering, microcalorimetry and by ¹H NMR spectroscopy including the measurements of spin–lattice (T1) and spin–spin (T2) relaxation times for the protons of PNIPAM. As expected, the seed particles grew in hydrodynamic size during the crosslinking polymerization of NIPAM, and a larger NIPAM to seed mass ratio in the polymerization batch led to a larger increase of particle size indicating a product coated with a thicker PNIPAM shell. Broader microcalorimetric endotherms of dehydration were observed for crosslinked PNIPAM on the solid cores compared to the PNIPAM microgels and also an increase of the transition temperature was observed. The calorimetric results were complemented by the NMR spectroscopy data of the ¹H-signal intensities upon heating in D₂O, showing that the phase transition of crosslinked PNIPAM on polystyrene core shifts towards higher temperatures when compared to the microgels, and also that the temperature range of the transition is broader.     

Morphology of dry lignins and size and shape of dissolved kraft lignin particles by X-ray scattering

Lignin is a highly branched polymer consisting of phenylpropane units, and it is one of the ingredients of the supporting matrix in plant cell walls. The morphology of several lignins extracted from plant cell walls using different methods was studied by small-angle and ultra-small-angle X-ray scattering. A power-law type intensity was observed for the dry lignins, but on the basis of the power-law exponent the fractal approach often applied to lignins is not fully justified. However, the intensity of kraft lignin did show a power law with surface fractal dimension D(s) = 2.7 +/- 0.1. The specific surface area of the lignins ranged from about 0.5 to 60 m(2)/g with 20% relative accuracy. The radius of gyration was determined from small-angle X-ray scattering data for aqueous solutions of kraft lignin. The shape of the particles in NaCl and NaOH solutions was found to be elongated. The particles were about 1-3 nm thick, while the length (5-9 nm) depended on the solvent and on the lignin concentration. The size of these primary particles was approximately the same as the size of the pores in the fractal aggregates of the dry kraft lignin. Their size was determined to be about 3.5 nm.     

Excess enthalpies of binary solvent mixtures of N-methylacetamide with aliphatic alcohols

The molar excess enthalpies H _m ^E of binary solvent mixtures of N-methylacetamide with methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, and t-butanol have been measured with a flow microcalorimeter at 40°C. The excess enthalpies are negative for methanol and positive for the other alcohols over the whole composition range, except for t-butanol which exhibits a sigmoid curve with a deep minimum at low mole fractions of the amide. The values for the primary alcohols increase in the order methanol < ethanol < 1-propanol < 1-butanol. The partial molar excess enthalpies have also been evaluated. Intermolecular interactions in these mixtures are discussed through comparison of the results with those for the corresponding binary mixtures of N,N-dimethylacetamide.     

Novel luminescent metal-organic frameworks [Eu2L3(DMSO)2(MeOH)2] x 2 DMSO x 3 H2O and [Zn2L2(DMSO)2] x 1.6 H2O (L = 4,4'-ethyne-1,2-diyldibenzoate)

Novel metal-organic frameworks [Eu2L3(DMSO)2(MeOH)2] x 2 DMSO x 3 H2O, 1, and [Zn2L2(DMSO)2] x 1.6 H2O, 2, (L = 4,4'-ethyne-1,2-diyldibenzoate) have been synthesized and structurally characterized. Compound 1 is a 3D open framework while 2 features interpenetrating 2D sheets in the crystal lattice. Both compounds have been characterized with X-ray crystallography, elemental analysis, and thermogravimetric analysis. Compounds 1 and 2 are red and blue-green luminescent, respectively, in the solid state at ambient temperature. Thermogravimetric analysis implies that the extensive interpenetration stabilizes the lattice of 2, although it diminishes the porosity at the same time. The luminescence of 1 can be reversibly quenched and restored by the addition and removal of iodine.     

REACTIVITY OF CHLOROPHYLL a/b-PROTEINS AND MICELLAR TRITON X-100 COMPLEXES OF CHLOROPHYLLS a OR b WITH BOROHYDRIDE

The reaction of several plant chlorophyll-protein complexes with NaBH₄ has been studied by absorption spectroscopy. In all the complexes studied, chlorophyll b is more reactive than Chi a, due to preferential reaction of its formyl substituent at C-7. The complexes also show large variations in reactivity towards NaBH₄ and the order of reactivity is: LHCI > PSII complex > LHCII > PSI > P700 (investigated as a component of PSI). Differential pools of the same type of chlorophyll have been observed in several complexes.
Parallel work was undertaken on the reactivity of micellar complexes of chlorophyll a and of chlorophyll b with NaBH₄ to study the effect of aggregation state on this reactivity. In these complexes, both chlorophyll a and b show large variations in reactivity in the order monomer > oligomer > polymer with chlorophyll b generally being more reactive than chlorophyll a. It is concluded that aggregation decreases the reactivity of chlorophylls towards NaBH₄ in vitro, and may similarly decrease reactivity in naturally-occurring chlorophyll-protein complexes.