类Liu系统在水声微弱信号检测中的应用研究

利用三阶混沌系统构造了一种新的微弱信号检测系统——类Liu系统, 对类Liu 系统进行了深度的理论分析. 类Liu系统中, 当输入待测信号幅值大于某临界值时, 系统可达到平衡点S₀, S₀中系统变量x平衡于摄动力信号, 系统变量y, z收敛于零态, 且S₀ 对应的Lyapunov指数小于零. 通过Matlab仿真、Multisim电路仿真以及实际电路证明了类Liu系统的周期态收敛性及广域检测性, 解决了传统Duffing系统进行微弱信号检测时周期态不收敛、只能进行窄域检测等问题, 同时谱级信噪比范围仍可达-46.57 dB. 类Liu系统采用了全新的设计理念, 具有较高的实用价值, 对未来海洋物联网中的水声通信有一定参考价值.     

钾掺杂对三联苯的超导特性探寻

新型超导材料的设计合成及其超导机理的探索是目前凝聚态物理学领域的重要研究方向. 本文采用高真空热烧结方法制备了钾掺杂对三联苯粉末材料并表征了它们的晶体结构、分子振动、磁学及超导特性. X射线衍射图谱和拉曼光谱表明在烧结样品中除存在钾掺杂对三联苯和KH外, 还含有苯环重组的C₆₀和石墨成分. 拉曼光谱中部分峰位的红移进一步证实钾成功掺入对三联苯分子晶体中并将4 s电子转移到C原子上. 零场冷却磁性测量结果表明: 多数样品在整个温度测量区间表现为居里顺磁性, 但少数样品呈现出抗磁性, 而且在17.86, 10.00 和6.42 K三个温度点出现磁化率突降的反常行为, 其中17.86 K处的突降很可能源于钾掺杂C₆₀引起的超导转变, 而后两者可能与钾掺杂对三联苯导致的超导相关. 研究结果有助于理解金属掺杂芳香烃有机超导体这一新兴超导家族的晶体生长和物理特性, 同时也提供了一种低温制备C₆₀和石墨的新方法.     

基于HI-13串列加速器在束γ终端原子核激发态寿命测量的核结构研究

利用在HI-13串列加速器的在束γ终端上建立的多普勒线移衰减法、反冲距离多普勒线移法和快时间延迟符合法等3种寿命测量方法,开展了原子核手征对称性、磁转动等核结构热点课题的研究工作。实验结果表明,130Cs的伙伴带具有很好的手征特性,而106Ag的候选带并非手征双带。根据测量的能级寿命提取的B（M1）值表明,106Ag的正宇称晕带和107Ag的正、负宇称晕带都具有典型的磁转动特性。此外,寿命测量数据还为解释和理解不同的同位素链中展现出的形状演化、形状共存、形状相变及临界点对称性等物理现象提供了有价值的实验证据。 The significance and principle of lifetime measurements of excited states in nuclei are briefly described. By using the recoil-distance Doppler-shift method, the Doppler-shift attenuation method, and the fast-timing technique established at the in-beam γ terminal of HI-13 tandem accelerator, nuclear structure studies on topical subjects including chiral symmetries and magnetic rotation have been performed. Our experimental results indicate that 130Cs shows better chiral characteristics, however, the two candidate bands of 106Ag could not be a pair of chiral doublet bands. For magnetic rotation, the deduced B(M1) values deduced from the measured level lifetimes clearly demonstrate that the yrast positive-parity band in 106Ag and both the yrast positiveand negative-parity bands in 107Ag are magnetic rotation bands. In addition, our lifetime measurement data also provide valuable experimental evidences for the interpretation and understanding of the shape evolution, the shape coexistence, and the critical-point symmetries of shape phase transition in the different isotope chains.     

Structures,Oxidation, and Charge Transport of Phosphorus‐Doped Germanium Nanocrystals

The doping of semiconductor nanocrystals (NCs) is crucial for the optimization of the performance of devices based on them. In contrast to recent progress on the doping of compound semiconductor NCs and silicon NCs, the doping of germanium (Ge) NCs has lagged behind. Here it is shown that Ge NCs can be doped with phosphorus (P) during synthesis by a nonthermal plasma. It is found that there are more P atoms in the NC near‐surface region than in the NC core. P doping modifies the surface state of Ge NCs. Compressive strain can be incuced in Ge NCs by P which can explain the P‐doping‐enhanced oxidation resistance of Ge NCs. Stable dispersions of P‐doped Ge NCs in acetonitrile can be cast to produce films for field‐effect transistors (FETs). FET analysis shows that the electrical conductivity and electron mobility of a Ge‐NC film increase with the increase of the P doping level, although the electrical activation efficiency of P in the Ge‐NC film is low. Finally, atomic layer deposition of aluminum oxide at the surface of P‐doped Ge NCs is shown to improve the performance of the FETs.     

Multiparty-controlled quantum secure direct communication

A theoretical scheme of a multiparty-controlled quantum secure direct communication is proposed. The supervisor prepares a communication network with Einstein-Podolsky-Rosen pairs and auxiliary particles. After passing a security test of the communication network, a supervisor tells the users the network is secure and they can communicate. If the controllers allow the communicators to communicate, the controllers should perform measurements and inform the communicators of the outcomes. The communicators then begin to communicate after they perform a security test of the quantum channel and verify that it is secure. The recipient can decrypt the secret message in a classical message from the sender depending on the protocol. Any two users in the network can communicate through the above processes under the control of the supervisor and the controllers. The text was submitted by the authors in English.     

Observation of spontaneous pattern with six-fold symmetry in disk-shaped ZnO complex microstructures

Using a simple vapor phase transport technique, we have fabricated unique complex disk-shaped ZnO microstructures comprising a small disk coaxially grown on a large one and observed spatially perfect six-fold symmetric patterns. The observed results can be explained based on the spontaneous nanoindentation (NI) effect under the geometric constraints and the explanation can be extended to fathom the growth mechanism of other highly symmetrical ZnO nanostructures. Our results indicate that NI not only can elucidate the mechanical properties of surfaces and thin films but also is an effective approach to fabricate ordered nanostructures with high precision on the location of the building blocks. PACS 81.16.Rf; 81.07.-b; 81.05.Dz     

大功率高温超导滤波器的设计与功率测试

本文在双面YBCO高温超导薄膜上设计并制备了两节大功率超导滤波器,根据滤波器功率承载能力与最大电流密度之间的关系,减小电流密度和分散电流密度的分布是提高功率承载能力的关键.本文采用增加超导谐振器尺寸、优化几何结构及改进馈线耦合方式的方法,设计了两节2 GHz频段梭型谐振器结构的滤波器.设计及测量结果显示了馈线结构及谐振器几何尺寸优化程度对超导滤波器功率承载能力有不同程度的影响,说明了在大功率超导滤波器设计中应选用无结点间隙耦合式馈线以抑制电流密度的聚集.采用优化后的谐振器结构制备的梭型两节超导滤波器经测试功率承载能力为2 W.超导滤波器的尺寸为25×12 mm LaAlO3基片,中心频率2.022 GHz,相对带宽为2.4%.同时给出了超导滤波器功率测试的结构和方法.     

基于RFID及3G网络的物流跟踪系统研究

为实现物流货物自动跟踪,通过RFID电子标签自动记录货物的收货、入库、卸货、送货全过程,在运输途中,通过传感器实时采集运输环境参数并通过3G上传到服务器,在地图上实现货物位置、运输环境、货物名称的精确对比,运输环境不合适时及时报警;详细介绍了系统的整体设计,并对系统的软硬件设计进行了分析,测试结果表明,系统整体稳定,环境测量误差率低,能够实现物流货物的全程跟踪,该系统可广泛应用于物流业。     

皮秒脉冲功率技术理论模型及其优化设计

为了产生100~500 ps,200~500 kV,1~10 kA数量级的皮秒放电脉冲,建立了一个皮秒脉冲发生器理论模型,并提出利用增益系数极值法,确定其最大兼容工作点,相对于纳秒脉冲成形线,皮秒脉冲成形线实现了90%,70%,85%的归一化电压增益、能量增益和放电功率增益。为了最大限度地降低皮秒脉冲成形线的载压时间,提高系统的绝缘安全因子,利用华罗庚0.618优算法,设计了电压传输系数。在纳秒脉冲成形线与皮秒脉冲成形线阻抗比值等于1.63条件下,在4倍和6倍皮秒脉冲成形线时间之内,归一化电压增益、能量增益和放电功率增益就可以分别达到94%,72%,89%与99%,53%,97%。     

一维函数光子晶体的研究

本文提出一种新型函数光子晶体, 其折射率是空间位置函数. 由费马原理, 我们给出光在一维、 二维和三维函数光子晶体中的运动方程, 以及一维函数光子晶体的色散关系、 带隙结构和透射率, 再利用传输矩阵理论研究函数光子晶体周期数、 入射角和介质层的厚度等对透射率和禁带结构的影响, 计算发现通过选择不同的折射率空间分布函数, 可以得到比传统光子晶体更宽或更窄的禁带结构. 这样为我们设计不同带隙结构的光子晶体提供理论依据.