UPLC-ELSD Determination of 1-Octacosanol in Raw Material and Health Products

Determination of the levels of 1-octacosanol is important in food stuff for the study of its pharmacological activities and health benefits. In this study, a novel, simple and fast internal standard method for the non-derivatization ultra-performance liquid chromatographic determination of 1-octacosanol in raw materials and health products was developed and validated based on evaporative light scattering detection. The linearity (r ² > 0.998), recovery (99.1–100.2%, RSD <2.7%), intra- and inter-day precision (RSD <3.8%), limit of detection (1.0 mg/L), limit of quantification (2.2 mg/L) of the 1-octacosanol were determined. The method was successfully applied to nine real 1-octacosanol products. The results of analyses had close agreement with the labeled claims of 1-octacosanol content in these products. Compared with the classical gas chromatography method, the developed method was simpler, faster and more environmentally friendly due to avoiding any derivatization step. This protocol represents a rapid and feasible method for quality control of 1-octacosanol products.

     

Flexural contact in MEMS stiction

Adhesive force between two solid surfaces can lead to stiction failure of the micro-electro-mechanical systems (MEMS) device. The competition between the adhesive force and the beam restoring force determines whether the stiction occurs or not. Previous models assume that the stuck beam deforms either as the arc-shape or the S-shape, which causes significant differences in the measurements of adhesion and disputations among researchers. The contact mechanics model presented in this paper shows that the assumptions of the arc-shape and S-shape on the beam deformation over-simplify the problem; both the arc-shaped deformation and S-shaped deformation significantly deviate from the real ones. The previous theories are shown to be incompatible with the recent experimental results. The model presented in this paper attempts to explain those new experimental results and resolve some disputations on the previous models. The instabilities of jump-in during loading process and jump-off during unloading process are also incorporated in this model.     

Discontinuous crack-bridging model for fracture toughness analysis of nacre

Studying the structure–property relation of biological materials can not only provide insight into the physical mechanisms underlying their superior properties and functions but also benefit the design and fabrication of advanced biomimetic materials. In this paper, we present a microstructure-based fracture mechanics model to investigate the toughening effect due to the crack-bridging mechanism of platelets. Our theoretical analysis demonstrates the crucial contribution of this mechanism to the high toughness of nacre. It is found that the fracture toughness of nacre exhibits distinct dependence on the sizes of platelets, and the optimized ranges for the thickness and length of platelets required to achieve higher fracture toughness are given. In addition, the effects of such factors as the mechanical properties of the organic phase (or interfaces), the effective elastic modulus of nacre, and the stacking pattern of platelets are also examined. Finally, some guidelines for the biomimetic design of novel materials are proposed based on our theoretical analysis.     

北京自由电子激光最近进展──实现饱和振荡

北京自由电子激光(BFEL)装置于1993年底在10.68μm处实现了饱和振荡.输出激光能量为3mJ,饱和平顶宽度2μs.对应饱和振荡平均功率为210kW(宏脉冲),峰值功率约为20MW,比自发辐射高8个量级,单程小讯号净增益为24%,转换效率为0.45%,与理论预期结果相符.光束质量接近衍射极限.目前装置可工作于9-11μm.     

利用不完全自锁模激光研究C60的反饱和吸收效应

本文报道首次采用色心晶体的不完全自锁模激光（１０６４ｎｍ）对Ｃ６０分子反饱和吸收效应的研究，实验结果与采用平均过程的研究方法是一致的，文中还讨论了Ｃ６０分子反饱和吸收效应产生的原因。     

单模光纤波导模的傍轴传输特性

将LP01模表示成用拉盖尔-高斯模线性叠加的形式,利用柯林斯公式推导出单模光纤波导模通过傍轴ABCD光学系统的解析传输公式。用所得的解析公式对LP01模在自由空间的传输和聚焦特性作了研究,并和高斯基模进行了比较。数值计算结果表明,用高斯基模描述LP01模会产生一定误差。LP01模经过透镜聚焦后存在焦移,且焦移随着菲涅尔数传输特性的减小而增大。选择合适的菲涅尔数聚焦后,LP01模会出现长焦深,这是与聚焦的高斯模所不同的。