一种实现光子晶体波导定向耦合型多路光均分的新方法

将多光子晶体单模波导平行、邻近放置构成定向耦合器. 依据自映像原理,数值分析了输入光场对称入射时,该系统中光的传播行为. 基于此结构,以三、四通道为例,设计了超微多路光分束器,并仅通过对称地改变耦合区中两个介质柱的有效折射率,使光场在横向发生重新分布,实现了输出能量的均分或自由分配. 和已报道结果相比,此调制方法更为简单易行而且效率更高,并可以推广到具有更多输出通道的光分束器中,在未来的集成光回路中具有广泛的应用价值. 关键词： 光子晶体波导 定向耦合器 分束器 能量均分     

Switchable different operation states in an erbium-doped fiber laser cavity with normal dispersion

We demonstrate different operation states which can be switched by the polarization control in an erbium-doped fiber laser cavity with normal dispersion, including passive single-pulse and multiple-pulse mode-locking, coherent pulse pattern, and passive Q-switching. The mode-locked single pulse has a smooth and broad rectangular-shaped spectrum. With increasing pump power, multiple pulses appear and finally six pulses are observed, where the pulses have no interaction with each other. Keeping the pump power at 407 mW and adjusting the polarization state, we observe the coherent pulse pattern with the pulse numbers from 2 to 5. It is the first time five coherent pulses in the 1.55 μm normal dispersion cavity have been observed, to our knowledge. The mode-locked spectra are highly modulated and the largest pulse separation of 31.9 ps is observed for the two-pulse case. When the pump power exceeds 180 mW, the mode-locked operation can be switched to the passively Q-switched operation by controlling the polarization state. The repetition rate and pulse width can be changed by pump power variation, and the spectrum is tunable in the range of 8.45 nm.     

Developing a wireless sensing method for the measurement of gamma radiation dose based on the polymerization of acrylamide

A wireless sensing method for the measurement of gamma radiation dose has been developed based on the fact that gamma rays can initiate the polymerization of acrylamide, which causes an increase in solution viscosity that can be detected with a wireless magnetoelastic sensor. The magnetoelastic sensor is able to wirelessly detect the resonance frequency shifts of a magnetoelastic foil in response to changes in solution viscosity. There is a linear relationship between the resonance frequency shift and gamma radiation dose in the range of 0–50 Gy (under optimal conditions) with a detection limit of 0.25 Gy. This method has the advantage of providing real-time, continuous measurement in situ. The method has been used successfully to determine the gamma radiation dose in real exposure scenarios, with satisfactory results.     

Microstructure and anti-oxidation property of CrSi2-SiC coating for carbon/carbon composites

To protect carbon/carbon (C/C) composites from oxidation, a new type of oxidation protective coating has been produced by a two-step pack cementation technique. XRD and SEM analysis show, the coating obtained by the first step pack cementation was a porous β-SiC structure, and a new phase of CrSi₂ was generated in the porous SiC coating after heat-treatment according to the second step pack cementation process. Oxidation test shows that, the weight loss of the SiC coated C/C is up to 11.26% after 5 h oxidation in air at 1773 K, and the weight loss of the CrSi₂-SiC coated C/C composites is only 4.15% after oxidation in air at 1773 K for 34 h. The oxidation of C/C composites was primarily due to the reaction of C/C matrix and oxygen diffusing through the penetrable cracks in the coating.     

Optimal design of a convergent-barrel cold spray nozzle by numerical method

A convergent-barrel (CB) cold spray nozzle was designed through numerical simulation. It was found that the main factors influencing significantly particle velocity and temperature include the length and diameter of the barrel section, the nature of the accelerating gas and its pressure and temperature, and the particle size. Particles can achieve a relatively low velocity but a high temperature under the same gas pressure using a CB nozzle compared to a convergent-divergent (CD) nozzle. The experiment results with Cu powder using the designed CB nozzle confirmed that particle deposition can be realized under a lower gas pressure with a CB nozzle.     

L波段高功率波导缝隙阵设计与数值模拟

设计了一种基于宽边纵缝驻波阵的高功率射频微波辐射系统,系统由四路矩形波导以及聚四氟乙烯天线窗组成。天线内采用真空绝缘实现天线高功率容量,天线窗真空侧采用周期刻三角槽技术抑制高功率微波介质表面击穿。在波导缝隙阵与天线窗之间设计支撑板,除支撑天线窗外还可抑制表面波电流。采用HFSS数值模拟软件对辐射系统进行了优化设计。数值模拟结果表明,设计的辐射系统在频率为1.575 GHz时,增益为22.7 dBi,天线口径效率为98.3%,反射系数为-25 dB,带宽达到5%,带宽内天线增益波动小于等于0.4 dB、天线口径效率大于等于98%、主瓣指向偏差小于等于1.2。系统功率容量达到1.92 GW。     

GaN基薄膜半导体材料不同非线性效应的竞争关系

采用金属有机化合物化学气相沉积方法生长了未掺杂GaN,p型Mg掺杂GaN,InGaN/GaN多量子阱等薄膜半导体材料,研究了其在800 nm飞秒激光激发下的非线性光学性质.实验结果表明,在800 nm飞秒激光激发下,多光子荧光、二次谐波等非线性光学信号之间存在着竞争关系,反映出不同非线性光学信号对激发光的能量分配存在着竞争,并通过其非线性光学信号强度与激发强度之间的依赖关系进行了验证.同时,本文对其竞争机理进行了初步探究.     

Al掺杂对Mg_2Si介电性质影响的第一性原理研究

采用基于密度泛函理论的第一性原理平面波超软赝势方法,计算了本征Mg_2Si和Al掺杂Mg_2Si的形成能、电子结构和介电函数.结果表明,Al掺杂Mg_2Si后,Al以替位杂质(Al替Mg位,即AlMg)或填隙杂质(Al位于晶胞间隙位,即Ali)的形式进入Mg_2Si晶格.费米能级进入导带,体系呈n型导电.掺杂后体系的介电函数的实部和虚部在低频时比未掺杂时均增大,主要是由于晶格中的施主杂质Al离子束缚着附近的过剩电子,在外加交变电场的作用下,束缚在Al离子周围的电子要克服一定的势垒不断地往复运动造成松弛极化和损耗.另外,掺杂体系相对于未掺杂体系,介电函数的虚部在0.5 eV附近出现了一个额外的介电峰,该峰主要是由电子从价带跃迁到Al杂质能级引起的.计算结果为Mg_2Si基光电子器件的设计和应用提供了理论依据.     

Influence of fluoride on f-f transitions of Eu in LiEuM2O8 (M=Mo, W)

The influence of fluoride on the luminescence of LiEuM₂O₈ (M=Mo, W) was studied. LiEuMo₂O₈ and LiEuW₂O₈ formed the whole range of solid solutions, which emitted intense red luminescence under the excitations by 395, 465 and 535 nm wavelengths. When doped with fluoride, the materials also formed solid solutions and the luminescent intensity was remarkably enhanced. The phosphor with optimized compositions in this system would be a promising red component for solid-state lighting devices based on GaN light-emitting diodes.