Giant optical activity and circular dichroism in the terahertz region based on bi-layer Y-shaped chiral metamaterial

We present a bi-layer Y-shaped chiral metamaterial (CMM) that can realize a giant optical activity and circular dichroism (CD) effect to the incident linear polarization wave in the terahertz (THz) region. Numerical simulation results exhibit that the pronounced CD effect with a great difference between the transmission coefficients for the circularly polarized waves can be obtained at 5.06 THz, meanwhile the 90°-polarization rotation can be observed at 5.2 THz when a y-polarized wave is incident to this CMM propagating along the −z-axis. The mechanism of the optical activity and giant CD effect is illustrated by simulated surface current distributions. Further, the influences of the structural parameters of the proposed CMM to the optical activity and CD effect have been investigated numerically.     

Cesium 6S(1/2) --> 8S(1/2) two-photon-transition-stabilized 822.5 nm diode laser

A cesium 6S(1/2) --> 8S(1/2) two-photon-transition (TPT)-stabilized 822.5 nm diode laser is reported for the first time to our knowledge. Allan deviation of 4.4 x 10(-13) (60 s) was achieved, and the possible systematic errors were evaluated as smaller than 2 kHz. We demonstrate that the cesium TPT-stabilized diode laser could be a reliable frequency reference at 822.5 nm wavelength.     

Recent Advances in Spatial Self-Phase Modulation with 2D Materials and its Applications

In recent years, spatial self-phase modulation (SSPM) with two-dimensional (2D) materials has attracted the attention of many researchers as an emerging and ubiquitous nonlinear optical effect. In this review, the state of the art of 2D material-based SSPM is summarized. SSPM measures or tunes the nonlinearity of 2D materials, and it is also an effective approach to study the band structure of 2D materials. Several modified forms of SSPM, such as high-order, white-light-excited, vector field excited, and optically nonlinearly enhanced SSPM are also presented. Subsequently, the physical origin of the SSPM formation mechanism is compared and analyzed. Furthermore, the applications of SSPM with 2D materials, including passive photonic devices, generation of Bessel beams, and identifying the mode of the orbital angular momentum, are listed. Finally, several urgent problems of the SSPM with 2D materials, potential applications, and prospects for future development are presented.     

Stability of trapped Bose-Einstein condensates in one-dimensional tilted optical lattice potential

Using the direct perturbation technique,this paper obtains a general perturbed solution of the Bose-Einstein condensates trapped in one-dimensional tilted optical lattice potential. We also gave out two necessary and sufficient conditions for boundedness of the perturbed solution. Theoretical analytical results and the corresponding numerical results show that the perturbed solution of the Bose-Einstein condensate system is unbounded in general and indicate that the Bose-Einstein condensates are Lyapunov-unstable. However,when the conditions for boundedness of the perturbed solution are satisfied,then the Bose-Einstein condensates are Lyapunov-stable.     

Geometric and electronic structure of positively and negatively poled LiNbO3 (0 0 0 1) surfaces

The effect of ferroelectric poling direction on the structure and electronic properties of the LiNbO₃ (0 0 0 1) surface was characterized. Low energy and reflection high energy electron diffraction indicated that both the positively and negatively poled surfaces were (1 × 1) with no evidence of longer range periodic reconstructions. Low energy ion scattering spectra from both surfaces were dominated by scattering from oxygen atoms. X-ray and ultraviolet photoelectron spectra also showed little difference between the positively and negatively poled surfaces, with the exception of a high binding energy shoulder on the O 1s core level of the negative surface. Exposure of the surfaces to atomic hydrogen caused reduction of the surface Nb rather than an increase in intensity on the high binding energy side of the O 1s peak, indicating that the shoulder on the O 1s peak on the negative surface was not due to surface hydroxyl groups. Temperature programmed desorption measurements indicated that the nearly stoichiometric LiNbO₃ samples were susceptible to loss of Li₂O starting at temperatures as low as 500 K, independent of the poling direction. An adatom/vacancy model is proposed in which oxygen ad-anions accumulate on one side of the crystal while oxygen anion vacancies are created on the opposite surface. This model can explain the apparent oxygen termination of both surfaces and the observed (1 × 1) periodicity of the surfaces, and also effectively screens the thickness dependent electric field associated with the polar orientation of the crystal.     

Comparison of microbiological loads and physicochemical properties of raw milk treated with single-/multiple-cycle high hydrostatic pressure and ultraviolet-C light

The effects of ultraviolet-C radiation (UV-C, 11.8?W/m²), single-cycle and multiple-cycle high hydrostatic pressure (HHP at 200, 400 or 600?MPa) on microbial load and physicochemical quality of raw milk were evaluated. Reductions of aerobic plate count (APC) and coliform count (CC) by HHP were more than 99.9% and 98.7%, respectively. Inactivation efficiency of microorganisms increased with pressure level. At the same pressure level, two-cycle treatments caused lower APC, but did not show CC differences compared with single-cycle treatments. Reductions of APC and CC by UV-C were somewhere between 200?MPa and 400/600?MPa. Both HHP and UV-C significantly decreased lightness and increased pH, but did not change soluble solids content and thiobarbituric acid-reactive substances’ values. Two 2.5?min cycles of HHP at 600?MPa caused minimum APC and CC, and maximum conductivity. Compared with HHP, UV-C markedly increased protein oxidation and reduced darkening.     

基于DS证据理论和压缩感知的WSN数据融合策略设计

为了降低WSN数据量和延长网络生命周期,设计了一种基于DS证据理论和压缩感知的WSN混合数据融合策略;首先,在分簇协议的基础上引入了基于DS证据理论和压缩感知的混合模型,然后,采用改进的DS对所有簇成员节点的基本信度分配函数进行加权处理,在簇头处采用加权和归一化的信度分配函数计算证据对各命题的支持程度,将支持程度较大的若干命题作为DS融合结果,在此基础上采用压缩感知方法通过构造测量矩阵对融合结果进行稀疏化表示,并在基站处对稀疏信号进行重构;仿真实验表明,文中方法能有效地实现数据融合,且和其他方法相比,具有重构误差较小和网络生命周期较长的优点,具有较大的优越性。     

Fiber in-line Mach-Zehnder interferometer constructed by selective infiltration of two air holes in photonic crystal fiber

A fiber in-line Mach-Zehnder interferometer is fabricated through selective infiltrating of two adjacent air holes of the innermost layer in the solid core photonic crystal fiber, assisted by femtosecond laser micromachining. The liquid infiltrated has higher refractive index than that of the background silica, and, hence, the two rods created can support a guide mode with lower effective refractive index than that of silica. The interference is produced by the fiber fundamental mode and the guide mode. The free spectral range (FSR) of the interferometer is found to be dependent on the photonic crystal fiber length, and a large FSR corresponds to a short photonic crystal fiber length. Such an interferometer device is robust and exhibits extremely high temperature sensitivity (～7.3?nm/°C for the photonic crystal fiber length of 3.4?cm) and flexible operation capability.     

Microstructure and high-temperature corrosion behaviors of aluminide coatings by low-temperature pack aluminizing process

Aluminide coatings were produced on carbon steel and Fe-5Cr-Mo alloy at a relatively lower temperature below 600 °C in shorter treatment time by a combination of surface refinement process and pack aluminizing process. Repetitive ball impact, generated by mechanical vibration, caused the top-layer refinement of substrates in a conventional pack aluminizing process. The effects of temperature and treatment time on the formation of aluminide coatings were analyzed. The microstructure of the coatings was investigated by SEM, AFM and XRD. The aluminide coatings were one-layer, compacted structure with ultrafine grains and uniform elemental distribution. High-temperature oxidation and sulphidation tests were carried out at 600 °C in air for 200 h and 10% SO₂ + Ar gas mixture atmosphere for 50 h, respectively. The mass gains and spallation indicated that the aluminide coatings significantly improved the high-temperature oxidation and sulphidation resistance.     

Millimeter-wave scattering from neutral and charged water droplets

We investigated 94 GHz millimeter-wave (MMW) scattering from neutral and charged water mist produced in the laboratory with an ultrasonic atomizer. Diffusion charging of the mist was accomplished with a negative ion generator (NIG). We observed increased forward- and backscattering of MMW from charged mist, as compared to MMW scattering from an uncharged mist. In order to interpret the experimental results, we developed a model based on classical electrodynamics theory of scattering from a dielectric sphere with diffusion-deposited mobile surface charge. In this approach, scattering and extinction cross-sections are calculated for a charged Rayleigh particle with effective dielectric constant consisting of the volume dielectric function of the neutral sphere and surface dielectric function due to the oscillation of the surface charge in the presence of applied electric field. For small droplets with radius smaller than 100 nm, this model predicts increased MMW scattering from charged mist, which is qualitatively consistent with the experimental observations. The objective of this work is to develop indirect remote sensing of radioactive gases via their charging action on atmospheric humid air.