Ftir Studies on LB Film of Amphiphile with Schiff Base as Headgroup and Its Copper Complex

Two different ways to form monolayers and LB films (surface film and subphase film) of the complex have been used, where a novel amphiphile containing Schiff base as a headgroup was used as a ligand. the monolayer behavior at the air/water interface was characterized by π-A isotherms and two-dimensional molecular orientation of alkyl chains in LB films and thermal stability were measured by polarized and variable temperature FTIR transmission spectra, indicating that the LB film of the novel amphiphile and its copper(II) complex are very stable as well as stearic acid. Because incorporating the metal ion into the monolayer makes it more condensed, thermal stability of the LB film was enhanced. as can be compared from their structure and properties, subphase films are superior to surface films.     

Optimization of Pretreatment Method for Alkylmercuries Speciation in Coal by High‐Performance Liquid Chromatography Coupled with UV‐Digestion Cold Vapor Atomic Fluorescence Spectrometry

Abstract

Exhaustive extraction of analytes in their original chemical forms from samples with complex matrices is a pivotal step for speciation analysis. Herein we propose a pretreatment method for extracting and preconcentrating methylmercury and ethylmercury from coal samples by using KBr–H₂SO₄/CuSO₄–C₆H₅CH₃–Na₂S₂O₃ system. The extraction conditions, including the volume of the organic phase and the extraction time, were optimized in detail. Speciation analysis of alkylmercuries was carried out by high‐performance liquid chromatography online coupled with UV‐digestion and cold vapor atomic fluorescence spectrometry. The detection limits were 0.6 ng mL^?1 for methylmercury and 1 ng mL^?1 for ethylmercury, respectively. The recoveries of methylmercury and ethylmercury spiked in a sample were 84% and 82%, respectively. The method was applied successfully to analysis of alkylmercuries in four coal samples collected from northeast China.     

Single-crystal elasticity of the rhodochrosite at high pressure by Brillouin scattering spectroscopy

ABSTRACT

The sound velocity properties of single-crystal rhodochrosite (MnCO₃) were determined up to 9.7?GPa at ambient temperature by Brillouin scattering spectroscopy. Six elastic constants were calculated by a genetic algorithm method using the Christoffel's equations at each pressure. The elastic constants increased linearly as a function of pressure and its pressure derivatives ?Cij/?P for C₁₁, C₃₃, C₄₄, C₁₂, C₁₃, C₁₄ were 5.86 (±0.36), 3.82 (±0.44), 2.06 (±0.39), 5.07 (±0.27), 5.34 (±0.44), 1.52 (±0.24), respectively. Based on the derived elastic constants of rhodochrosite, the aggregate adiabatic bulk and shear moduli (K_s and G) were calculated using the Voigt-Reuss-Hill averages and the linear fitting coefficients (?K_s/?P)_T and (?G/?P)_T were 5.05(±0.26) and 0.73(±0.05), respectively. The aggregate V_p of rhodochrosite increased clearly as a function of pressure and its pressure derivative ?V_p/?P was 7.99(±0.53)?×?10^?2?km/(s?GPa), while the aggregate V_s increased slowly and ?V_s/?P was only 1.19(±0.12)?×?10^?2?km/(s?GPa). The anisotropy factor for As of rhodochrosite increased from ～40% at 0.8?GPa to ～48% at 9.7?GPa, while A_p decreased from ～19% to ～16% at the corresponding pressure.     

Investigation of formation mechanism of Ti3SiC2 by high pressure and high-temperature synthesis

ABSTRACT

In this paper, synthesis of titanium silicon carbide (Ti₃SiC₂) under high pressure and high-temperature condition has been investigated by using the reactant systems Ti/Si/C, Ti/SiC/TiC, Ti/SiC/C and Ti/TiC/Si. Results reveal that Ti/TiC/Si is unsuited to the synthesis of Ti₃SiC₂ under a high pressure of 2.0?GPa, while an elemental mixture of Ti/Si/C is applicable. By the addition of Al, Ti₃SiC₂ with 95.8?wt% purity was obtained from elemental mixture with a large excess of silicon. The optimum experimental parameters were determined as Ti/Si/Al/C having the molar ratio of 3:1.5:0.5:1.9, holding at 2.0?GPa and 1300?°C for 60?min.     

Improvement of all-optical switching performance based on azo dye-doped polymer film using two cross-linearly polarized pump beams

We propose a method for improving the characteristics of all-optical switching based on azo dye-doped polymers. Using alternately two cross-linearly polarized beams (532 nm, continuous light wave (CW)) to pump azo dye–ethyl red (ER) doped polymer methyl methacrylate (PMMA) film, the modulation depth of the all-optical switching reached 96% at the pump powers of 4.8 mW and 1.6 mW and the modulation frequency of 1000 Hz. For comparison, we used respectively the single linearly polarized beam (4.8 mW) and the alternately linear–circular polarized beams (4.8 mW and 1.6 mW) to pump the film at the modulation frequency of 1000 Hz, the obtained modulation depths of the all-optical switching were 36% and 45.8%, respectively. Furthermore, the experimental measurement and analysis showed that the turn off speed of the all-optical switching could be obviously increased by use of our pump method.     

Optimisation of ultrasound assisted extraction of phenolic compounds from Sparganii rhizoma with response surface methodology

The present study reports on the extraction of phenolic compounds from sparganii rhizome. Box–Behnken Design (BBD), a widely used form of response surface methodology (RSM), was used to investigate the effect of process variables on the ultrasound-assisted extraction (UAE). Three independent variables including ethanol concentration (%), extraction time (min) and solvent-to-material ratio (mL/g) were studied. The results showed that the optimal UAE condition was obtained with an ethanol concentration of 75.3%, an extraction time of 40 min and a solvent-to-material ratio of 19.21 mL/g for total phenols, and an ethanol concentration of 80%, an extraction time of 33.54 min and solvent-to-material ratio of 22.72 mL/g for combination of ρ-hydroxybenzaldehyde, ρ-coumaric acid, vanillic acid, ferulic acid, rutin and kaempferol. The experimental values under optimal conditions were in good consistent with the predicted values, which suggested UAE is more efficient process as compared to solvent extraction.     

Spectroscopic Studies of the Stability of Doped Polythiophenes Under Air

Abstract

The stability of the doped state of conductive polythiophenes under air was investigated by the use of Infrared (IR) and UV-visible (UV) spectroscopies. Poly(3-methyl thiophene) doped with BF₃-ethyl ether (BFEE). shows higher stability due to its stereoregularity-chain structure. While the doped polythiophene (PT) degrades easily under the moisture.     

关于建立新型激励机制与综合应用激励手段的研究

本文从西方激励理论与我国企业现状出发．探索了建立适合改革中的企业管理体制的新型激励机制之路，指出新型激励机制中多种激励手段应有机地综合运用．首先对西方激励理论进行了分析．而后对“人”在管理中的地位进行了探讨．在分析我国激励机制中现存缺陷后．提出了从组织结构、企业文化、领导行为多个方面进行变革以建立新型激励机制的建议．     

关于物质激励与精神激励基础与结合研究

从激励的心理学理论基础出发进行分析；对需求、动机、行为等及其相互影响在激励实践中的作用进行了总结。精神激励和物质激励是两种主要的激励模式．它们都是从实践中来经过否定之否定而发展起来的．现代激励理论对两种激励基本上接受，但对两种激励的评价及侧重又各有不同．我国现行激励机制存在一些问题，尤以平均主义为甚．精神激励与物质激励的有机结合．是激励模式发展的未来．     

BAHADUR ASYMPTOTIC EFFICIENCY IN A SEMIPARAMETRIC REGRESSION MODEL

ＢＡＨＡＤＵＲＡＳＹＭＰＴＯＴＩＣＥＦＦＩＣＩＥＮＣＹＩＮＡＳＥＭＩＰＡＲＡＭＥＴＲＩＣＲＥＧＲＥＳＳＩＯＮＭＯＤＥＬ￥ＬＩＡＮＧＨＵＡ；ＣＨＥＮＧＰＩＮＧＡｂｓｔｒａｃｔ：ＴｈｅａｕｔｈｏｒＳｇｉｖｅＭＬＥθ１ＭＬｏｆθ１ｉｎｔｈｅｍｏｄｅｌＹ＝θ...