A Novel Green Preparation of a, a''''-Bis (substituted benzylidene)-cycloalkanones Promoted by FeCl_3 6H-2O in Ionic Liquid

a, a'-Bis(substituted benzylidene)cycloalkanones were efficiently prepared from cycloalkanones and benzaldehydes in [bmim][BF4] by using iron(III) chloride hexahydrate as a catalyst. It is shown that [bmim][BF4] and iron(III) chloride hexahydrate can be quantitatively recovered and be reused effectively for many times. Compared with the known methods, this novel process has the advantage of being an envkonmentally benign process together with good yields and mild reaction conditions.     

Extended applications and potential limitations of ring-fused 2,3-oxazolidinone thioglycosides in glycoconjugate synthesis

The utility of ring-fused 2,3-oxazolidinone derivatives of 2-amino-2-deoxy-thioglycosides in the synthesis of glycopeptide intermediates and building blocks for the synthesis of heparan sulfate oligosaccharides is reported. These unique ring-fused monosaccharides afford a novel and efficient route to alpha-O-linked 2-amino-2-deoxy amino acid derivatives and heparan sulfate oligosaccharide intermediates.     

AB5型球形合金粉的表面处理研究

由雾化（Gas－atomization）技术制备的AB5型球形合金粉，作为镍氢电池负极材料具有很多优点：粉粒呈球状便于在多孔基片内装填；耐压耐磨性好；抗碱能力强且不易解胶．但它的电化学初活性差，难于活化．有碍电池中的应用．采用适宜的氧化剂（铜盐水溶液）处理，使球粒表面形成一个富铜、富镍亚层，显著地改善了合金粉的电化学活性．经处理的MlNi3.8CO0.5Mn0.3Al0.4球形合金粉，仅3次充放电循环其放电量便可达到240mA·h·g-1；而未经处理的同一合金粉即便经6次充放电循环其放电量也只有103mA·h·g-1．     

四（对羟基苯基）卟啉—硅胶固定相的合成及在核苷酸分析中的应用

以大孔微硅胶作基体，经γ－氨丙基三乙氧基硅烷活化与间隔臂氯代环内烷反应后，再与预先合成的四（对羟基苯基）卟啉配体键合，构成电荷转移型亲和色谱固定相。以ＰＨ＝７．０的磷酸盐缓冲溶液作流动相，成功实现对一些核苷酸的高效液相亲和色谱分离。     

热定型聚酯纤维内应力与晶格变形的关系

<正> 结晶学家认为低分子物结晶虽可能存在一定缺陷和变形,但一般都具有一定的晶胞参数。这一概念对于高分子物结晶已不再正确。Bosley认为成形、热处理、冷却速率和杂质的存在皆可引起晶格变形;Fakirov故意在PET中加入少量杂质,却未引起变形。至今,PET已累积了7组晶胞参数,8个计算所得的晶区密度显示了较大幅度的波动(见     

A spectroscopic study on the 12-heteropolyacids of molybdenum and tungsten (H3PMo12−nWnO40) combined with cetylpyridinium bromide in the epoxidation of cyclopentene

The epoxidation of cyclopentene with hydrogen peroxide catalyzed by 12-heteropolyacids of molybdenum and tungsten (H₃PMo_12−nW_nO₄₀, n = 1–11), 12-tungstophosphoric acid and 12-molybdophosphoric acid combined with cetylpyridinium bromide as a phase transfer reagent was carried out in acetonitrile. Among 13 heteropolyacids investigated, catalyst of H₃PMo₆W₆O₄₀ showed the highest activity, giving a conversion of 60% and a selectivity of 95% in the epoxidation of cyclopentene. The fresh catalysts and the catalysts under reaction condition were characterized by UV–vis, FT-IR and ³¹P NMR spectroscopy, which has revealed that all of the molybdotungstophosphoric acids were degraded in the presence of hydrogen peroxide to form a considerable amount of phosphorus-containing species. The active species resulted from H₃PMo₆W₆O₄₀ are new kinds of phosphorus-containing species, which is different from {PO₄[WO(O₂)₂]₄}³⁻.     

Zirconium and hafnium complexes containing bidentate diarylamido-phosphine ligands

The first examples of mononuclear, structurally characterized triarylphosphine complexes of zirconium and hafnium are reported. The metathetical reactions of MCl4(THF)2 (M = Zr, Hf) with [iPrNP]Li(THF)2 ([iPrNP]- = N-(2-(diphenylphosphino)phenyl)-2,6-diisopropylanilide) or [MeNP]Li(THF)2 ([MeNP]- = N-(2-(diphenylphosphino)phenyl)-2,6-dimethylanilide) in toluene at -35 degrees C produced the corresponding [iPrNP]MCl3(THF) and [MeNP]2MCl2, respectively, in high yield. In contrast, attempts to prepare [MeNP]MCl3(THF) and [iPrNP]2MCl2 led to the concomitant formation of mono- and bis-ligated complexes, from which purification proved rather ineffective. The solution and solid-state structures of [iPrNP]MCl3(THF) and [MeNP]2MCl2 were studied by multinuclear NMR spectroscopy and X-ray crystallography. The geometry of these six-coordinate complexes is best described as a distorted octahedron in which the chloride ligands in [iPrNP]MCl3(THF) adopt a virtually meridional coordination mode whereas those in [MeNP]2MCl2 are trans to each other.     

甲醇与乙醇一步合成异丁醛用CuO-ZnO/Al2O3催化剂

在ＣｕＯ－ＺｎＯ／Ａｌ２Ｏ３催化剂上，甲醇与乙醇在常压和２１０￣３６０℃温度下一步反应合成异丁醛。利用正交设计方法，研究了ＣｕＯ－ＺｎＯ／Ａｌ２Ｏ３体系催化剂组成和制备条件等因素对催化剂催化性能的影响。结果表明，催化剂中ＣｕＯ含量对催化剂的催化活性影响最大，而ＺｎＯ含量则主要影响催化剂对异丁醛的选择性。催化剂制备条件，如沉淀温度、陈化时间等，也不同程度也影响催化剂的催化性能。ＸＲＤ和ＢＥＴ表征结果     

Cu，Pd－ZSM－5上NO分解和CO氧化的催化作用

双交换Ｃｕ，ｐｄ－ＺＳＭ－５催化剂（Ｃｕ交换度为１０５％，Ｐｄ交换度分别为３．４％和３３％）对ＣＯ氧化反应有活性增强作用，对ＮＯ分解反应不存在增强效应．双交换催化剂在于交换程序不同，而表面物种不同，活性组分的分布状态不同，因而有不同的活性．先交换Ｃｕ，４００℃焙烧后再交换ｐｄ的Ｃｕ－Ｐｄ－ＺＳＭ－５催化剂，对上述两类反应的活性存双组分催化剂中均为最高．Ｈ_２－ＴＰＲ谱表明，共交换的Ｃｕ－Ｐｄ－ＺＳＭ－５中尚有部分ＣｕＣｌ＋占据了部分交换位置，而使ＣＯ氧化活性稍有下降．Ｎ_２－ＤＴＡ和Ｈ_２－ＴＰＲ谱结果表明，Ｐｄ交换到Ｃｕ－ＺＳＭ－５中后，抑制了吸附水和水合铜化合物的形成，由此提高了在２００—３００℃时氧的吸附量．后者的大小和ＣＯ氧化活性有顺变关系．Ｎ_２－ＤＴＡ谱中３４０—４４５℃的放热峰可能分别表征了和ＮＯ分解活性有关的铜氧桥或把氧桥的形成，该放热峰的峰温愈低，峰面积愈大，则ＮＯ分解活性愈高．