PVP掺杂-ZrO2溶胶-凝胶工艺制备多层激光高反射膜的研究

以丙醇锆(ZrPr)为锆源,二乙醇胺(DEA)为络合剂,原位引入聚乙烯吡咯烷酮(PVP),在乙醇体系中成功地合成了PVP掺杂-ZrO2溶胶.采用旋涂法在K9玻璃基片上制备了PVP-ZrO2单层杂化薄膜.用不同掺杂量的PVP-ZrO2高折射率膜层与相同的SiO2低折射率膜层交替沉积四分之一波堆高反射膜.借助小角X射线散射研究胶体微结构,用红外光谱、原子力显微镜、紫外/可见/近红外透射光谱、椭圆偏振仪以及1064nm的强激光辐照实验对薄膜的结构、光学和抗激光损伤性能进行表征.研究发现,体系组成的适当配置可以在溶胶稳定的前提下实现ZrPr的充分水解,赋予薄膜良好的结构、光学和抗激光损伤性能.杂化体系中,DEA与ZrPr之间强的配合作用大大降低了ZrO2颗粒表面羟基的活性,使得PVP大分子只是以微弱的氢键与颗粒的表面羟基作用而均匀分散于ZrO2颗粒的周围,对颗粒的形成和生长无显著影响.因而在实验研究范围内,随PVP含量的增大,PVP-ZrO2杂化膜层的折射率和激光损伤阈值均无显著变化.但是,薄膜中均匀分布的PVP柔性链可以有效促进膜层应力松弛,显著削弱不同膜层之间的应力不匹配程度、大大方便多层光学薄膜的制备.当高折射率膜层中PVP的质量分数达到15%-20%时,膜层之间良好的应力匹配使得多层高反射膜的沉积周期数可达到10以上.沉积1O个周期的多层反射膜,在中心波长1064nm处透射率约为1.6%-2.1%,接近全反射特征,其激光损伤阈值为16.4-18.2J/cm2(脉冲宽度为1ns).     

Imaging theory of an aplanatic system with a stratified medium based on the method for a vector coherent transfer function

A simple formalism relating image fields to object fields, similar to that of the scalar and paraxial case, is presented for an aplanatic system obeying the sine condition, which shows that the vector plane-wave spectrum of image fields is equal to the product of the vector coherent transfer function due to the x- and y-polarized point electric field source and the scalar spectrum of the corresponding transverse object fields. Utilizing this formula and dyadic Green's function, a rigorous imaging theory of an aplanatic system for the point electric current source through a stratified medium is readily developed.     

机载腔增强吸收光谱系统应用于大气NO_2空间高时间分辨率测量

介绍了一套用于机载平台测量的非相干宽带腔增强吸收光谱(IBBCEAS)系统,并应用于实际大气NO_2空间分布的高时间分辨率观测.为满足机载测量中对时间分辨率的需求,系统采用离轴抛物面镜代替消色差透镜提高光学耦合效率;并运用Allan方差,对系统性能进行了分析.通过腔增强吸收光谱系统与长光程吸收光谱系统对实际大气NO_2的对比测试,两者线性相关系数R~2达到0.86.将IBBCEAS系统应用于机载平台,在时间分辨率为2 s的情况下,探测限达到95 ppt(1σ).通过机载观测,获得了华北地区石家庄等地上空对流层大气NO_2的廓线信息.     

Yolk–Shell‐Structured Cu/Fe@γ‐Fe2O3 Nanoparticles Loaded Graphitic Porous Carbon for the Oxygen Reduction Reaction

Core–shell Cu/γ‐Fe₂O₃@C and yolk–shell‐structured Cu/Fe@γ‐Fe₂O₃@C particles are prepared by a facile synthesis method using copper oxide as template particles, resorcinol‐formaldehyde as the carbon precursor, and iron nitrate solution as the iron source via pyrolysis. With increasing carbonization temperature and time, solid γ‐Fe₂O₃ cores are formed and then transformed into Fe@γ‐Fe₂O₃ yolk–shell‐structured particles via Ostwald ripening under nitrogen gas flow. The composition variations are studied, and the formation mechanism is proposed for the generation of the hollow and yolk–shell‐structured metal and metal oxides. Moreover, highly graphitic carbons can be obtained by etching the metal and metal oxide nanoparticles through an acid treatment. The electrocatalytic activity for oxygen reduction reaction is investigated on Cu/γ‐Fe₂O₃@C, Cu/Fe@γ‐Fe₂O₃@C, and graphitic carbons, indicating comparable or even superior performance to other Fe‐based nanocatalysts.     

量子点场效应单光子探测器二维电子气载流子浓度研究

设计了一种基于场效应晶体管的量子点场效应单光子探测器(quantum dot field effect transistor,QDFET),建立了二维电子气(two-dimensional electron gas,2DEG)的薛定谔方程和泊松方程,通过对薛定谔方程和泊松方程的自洽求解,对2DEG的载流子浓度进行了模拟。模拟结果显示,AlGaAs的Al组分、δ掺杂层的掺杂浓度以及隔离层的厚度对于2DEG的载流子浓度均有影响。为了使2DEG具有较高的载流子浓度,AlGaAs的Al组分应为0.2~0.4,δ掺杂浓度应为6~8×10~(13)/cm~2,隔离层厚度应在50nm以下。通过对2DEG的载流子浓度进行研究,可以掌握2DEG载流子浓度的影响因素,从而通过优化QDFET结构,可提高2DEG的载流子浓度。这对于高灵敏度QDFET的制备具有重要的意义和应用价值。     

彩色遥感图像薄云去除方法

针对彩色遥感图像中薄云带来的降质问题,提出了一种基于低秩矩阵分解的去云方法。将彩色遥感图像分成三个单通道图像,对每一个通道进行低秩矩阵分解,得到单通道薄云信息;根据薄云在三个通道中均匀分布的特点,选取合适的阈值对薄云信息进行自动判定,提取代表三个通道的薄云图像;用三个通道的图像分别减去对应通道的薄云图像,并融合三个通道的结果得到去云后的彩色遥感图像。实验结果表明,该方法不仅能够保留无云区域信息的完整性,而且对有云区域的处理在主观视觉效果和客观评价指标上都具有较好的效果。     

基于PSpice的半导体激光高频调制系统设计

为了实现高频率的调制激光输出,设计了一种驱动系统由信号放大、电流调制、过流保护和具有慢启动功能的直流偏置电路高度集成的半导体激光高频调制系统。此系统采用了结构简单的直接调制方式,运用线性调频的高频信号去控制半导体激光器发射激光的强度,从而实现高频调制。在运用OrCAD/PSpice对高频调制驱动系统进行模拟仿真的基础上,最终研制出的半导体激光高频调制系统实现了频率为40.02 MHz、直流偏置为493.326 mA、正弦波调制电流峰峰值为850 mA的高频调制输出,调制激光平均功率为300 mW。     

辐射成像系统模拟软件NUCRPD的研发与应用

在辐射成像系统的设计研发中,经常需要计算系统的各项物理性能指标。为了提升产品研发的效率,同方威视联合清华大学,基于蒙特卡罗程序包Geant4,研发了国内首套具有自主知识产权的辐射成像系统模拟软件NucRPD(NUCTECH Radiography Performance Design Tools),其能够快速、精确地模拟系统的各项性能指标。该软件对常用的一些辐射成像系统进行了参数化建模,用户通过修改软件界面上的少量参数,就可以快速建立各类辐射成像系统的几何体、源项、物理模型和统计量,然后在服务器上以并行计算方式完成模拟计算,能在较短的时间内模拟出系统的性能指标,并给出直观的图形帮助用户深入理解模拟结果。NucRPD的模拟结果经过了大量的实验验证,其剂量场分布和物理指标等模拟结果和实验结果符合得很好。NucRPD已经应用于同方威视辐射成像系统产品的设计研发,在产品的物理指标优化和辐射防护优化中发挥了重要作用。     

Synthesis of hierarchical Na<Subscript>2</Subscript>FeP<Subscript>2</Subscript>O<Subscript>7</Subscript> spheres with high electrochemical performance via spray drying

Hierarchical Na₂FeP₂O₇ spheres with nanoparticles were successfully fabricated by a facile spray drying method. A relatively low drying temperature was introduced in order to form a carbon layer on the surface. As a cathode material for sodium-ion batteries, it delivered a reversible capacity of 84.4 mAh g^?1 at 0.1 C and showed excellent cycling and rate performance (64.7 mAh g^?1 at 5 C). Furthermore, a full sodium battery was fabricated using SP-Na₂FeP₂O₇ as the cathode and hard carbon as the anode, suffering almost no capacity loss after 400 cycles at 1 C. Due to its superior electrochemical property and the low materials cost, Na₂FeP₂O₇ is becoming a promising cathode material for large-scale energy storage systems.