一例具有可逆热诱导电荷转移行为的二维氰基桥联WⅤ-CoⅡ配合物

具有不同自旋态的磁性双稳态材料因在存储器件和分子开关领域具有广泛的应用前景而备受关注。本文报道了一种基于W^Ⅴ-Co^Ⅱ电荷转移过程的新型磁性双稳态化合物。通过将4-((2-萘-1-基)乙烯基)吡啶(4-nvp)引入氰基桥接的W^Ⅴ-Co^Ⅱ层框架中,合成了一例氰基桥联二维双金属网络配合物{[W^Ⅴ(CN)₈]₂[Co^Ⅱ(4-nvp)₄]₃}·4CH₃OH (1),其中辅助配体4-nvp可以提供分子内和分子间π-π相互作用。磁性研究结果表明,化合物1表现出可逆的电子转移耦合诱导自旋转变行为(ETCST)。该过程使体系自旋态由W^Ⅴ—CN—Co^Ⅱ_HS(HS=高自旋)变到W^Ⅳ—CN—Co_LS^Ⅲ(LS=低自旋),并伴随着宽度为27 K的...     

钾改性氧化铝基羰基硫水解催化剂及其失活机理

天然气、油田伴生气、高炉煤气等化工生产过程中伴生COS气体,不仅会腐蚀管道和毒害催化剂,还会严重污染环境并危害人类健康。COS催化水解反应可在温和条件下高效的将COS脱除,是最具应用前景的COS脱除技术之一。碱金属元素因其具有独特的电子供体性质、表面碱性和静电吸附等特性,常被用作助催化剂以提高Al₂O₃的COS催化水解性能。近年来,以钾为助剂改性的Al₂O₃催化剂(K₂CO₃/Al₂O₃)在COS催化水解反应中得到广泛的应用,但由于负载在Al₂O₃上的K物种的组成复杂,目前研究者对K₂CO₃/Al₂O₃催化剂上COS水解机理的理解仍存在一定的困惑和争议。本论文通过湿法浸渍法合成出一系列钾盐和钠盐改性的Al₂O₃催化剂,并利用各类先进的表征技术对这些催化剂进行分析。活性测试表明,以K₂CO₃、K₂C₂O₄、NaHCO₃、Na₂CO₃和NaC₂O₄改性Al₂O₃催化剂均有助于COS的水解。其中K₂CO₃/Al₂O₃拥有最佳的COS水解性能,连续运行20 h后其COS转化率仍高于~93%,远远优于未改性的Al₂O₃ (~58%)。我们利用原位红外光谱和X射线光电子能谱探明了反应过程中催化剂的化学结构特征,阐明了H₂O分子在K₂CO₃/Al₂O₃上的水解作用机制。原位红外表明COS在K₂CO₃/Al₂O₃上的水解过程中形成了硫代碳酸氢盐中间产物。X射线光电子能谱表征证明催化剂的失活主要是因为催化剂表面积累了硫酸盐和单质硫。此外,我们还研究了水蒸气含量对COS水解性能的影响,研究发现,由于H₂O和COS分子在催化剂表面存在竞争吸附,过量的H₂O会引起催化活性的下降。上述研究表明,K₂CO₃/Al₂O₃催化剂上COS水解性能的提高主要是形成了HO-Al-O-K界面活性位。更为重要的是,所制备的催化剂都是在模拟工业工况条件下进行的,这为后续的工业应用提供了宝贵理论指导。本工作为理解助剂钾在Al₂O₃催化剂上COS水解活性的增强提供了新的见解,这为未来设计稳定高效的COS水解催化剂打开了新的发展方向。     

Simultaneous determination of chlorpyrifos and 3,5,6-trichloro-2-pyridinol in duck muscle by modified QuEChERS coupled to gas chromatography tandem mass spectrometry (GC-MS/MS)

A rapid, specific, and sensitive method based on modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) coupled to gas chromatography tandem mass spectrometry (GC-MS/MS) was developed and validated for simultaneous determination of chlorpyrifos (CP) and its metabolite 3,5,6-trichloro-2-pyridinol (TCP) in duck muscle. The residues of CP and TCP were extracted by acidified acetonitrile. The fat layer of the extract was removed under ?20 °C, then the organic layer was evaporated. The analytes were derivatized by N-(tert-butyldimethylsilyl)-N-methyltrifluoroacetamide (MTBSTFA) and cleaned up by a mixture of 150 mg MgSO₄, 25 mg graphitized carbon black (GCB), and 50 mg N-propylethylenediamine (PSA) to remove interference. The final extract was analyzed by GC-MS/MS. Recovery values at the spiking concentrations ranged from 86.2 to 92.3 % for CP and from 74.8 to 81.8 % for TCP, with relative standard deviations (RSDs) lower than 9.5 and 12.3, respectively. The correlation coefficients of CP (from 2 to 2,000 μg/kg) and TCP (from 1 to 1,000 μg/kg) were equal to or higher than 0.998. The limits of detection (LODs) were 0.3 and 0.15 μg/kg, and the limits of quantification (LOQs) were 1.0 and 0.5 μg/kg for CP and TCP in duck muscle, respectively. The average intra- and inter-day accuracy ranged from 84.6 to 91.2 % for CP and 75.6 to 82.3 % for TCP, and the intra- and inter-day precisions were from 5.8 to 8.2 % for CP and 6.5 to 11.9 % for TCP. Furthermore, the CP and TCP residues in duck muscle samples were detected for dietary risk assessment using the validated method.

单原子催化剂的制备、表征及催化性能

单原子催化剂(SACs)是指金属以单原子形式均匀分散在载体上形成的具有优异催化性能的催化剂.与传统载体型催化剂相比,SACs具有活性高、选择性好及贵金属利用率高等优点,在氧化反应、加氢反应、水煤气变换、光催化制氢以及电化学催化等领域都具有广泛应用,是目前催化领域的研究热点之一.常见的SACs制备方法有共沉淀法、浸渍法、置换反应法、原子层沉积法以及反奥斯瓦尔德熟化法等.实验及理论研究表明,单原子催化剂高的活性和选择性可归因于活性金属原子和载体之间的相互作用及由此引起的电子结构改变.载体是影响单原子催化剂性能的重要因素之一.目前常用的SACs载体有金属氧化物、二维材料和金属纳米团簇等,本文着重综述了这三种负载型SACs的制备、表征、催化性能及催化机理,并概述了SACs未来可能的发展方向和应用.研究表明,共沉淀法、湿浸渍法和反奥斯瓦尔德熟化法等方法可用来制备氧化物负载的SACs.高角环形暗场像-扫描透射电子显微镜(HAADF-STEM)表明金属是以单原子形式均匀分散在载体上,近边X射线吸收精细结构(XANES)结果表明金属原子与载体之间存在着强相互作用.实验和理论研究均表明该类催化剂在CO氧化反应、水煤气转化及乙炔加氢生成乙烯等反应中具有高的催化活性和稳定性.采用化学气相沉积法和原子层沉积法等方法可以将金属原子稳定地负载在具有缺陷活性位点的石墨烯、MXene及六方氮化硼等二维材料上并相应制备出SACs.X射线吸收精细结构谱(EXAFS)和XANES分析表明样品中金属以单原子形式存在,而且金属原子与载体之间也存在着强相互作用,理论计算表明金属原子与二维载体之间的电荷转移是SACs活性高的主要原因.置换反应法和连续还原法是制备溶胶型SACs的有效方法,其中置换反应法可将活性金属原子原位组装在金属模板团簇的顶点位置,连续还原法可将活性原子负载于金属模板团簇的表面.DFT计算表明活性原子和金属模板团簇之间存在电荷转移效应,这是溶胶型SACs具有非常高的催化活性的主要原因.SACs下一步的研究方向可能是:(1)研究开发新型SACs,尽可能提高催化剂中活性金属原子的含量;(2)深入研究SACs的结构、活性以及催化机理之间的关系;(3)尝试将SACs大规模应用于工业催化.     

单原子催化剂M1/FeOx(M=Pt,Fe)的理论研究:CO氧化反应

负载型纳米贵金属催化剂是用于多相催化反应的重要的催化剂之一,也是各国催化科学与技术研发的重点,其工业应用也越来越广泛.理论和实验的研究结果均表明,当载体表面的金属粒子尺寸减小至亚纳米级乃至更小的低配位、不饱和的原子团簇时,它们常常成为诱发催化反应的活性中心,呈现更高的催化活性和选择性.将负载的金属尺寸由纳米量级减小至分散的金属团簇甚至单原子而使每个原子成为反应的活性位点已成为研究的重点.最近,由张涛等首次合成的单原子催化剂(SAC)Pt1/FeOx引起了国内外催化及表面科学工作者的极大关注.单原子催化剂作为连接均相催化剂和多相催化剂的桥梁,不仅具有非均相催化剂的稳定、易于与反应体系分离、易表征等优点,而且具有均相催化剂活性中心结构均一、活性中心原子利用率百分之百等优点.一方面,单原子催化剂给多相催化领域注入了新的活力,另一方面也更有利于运用量子与计算化学的研究方法建立与实验相匹配的理论模型并从原子水平上进一步理解多相催化反应的微观作用机理.实验和理论的研究结果表明,其它单原子催化剂如Ir1/FeOx,Au1/FeOx和Ni1/FeOx催化CO氧化反应表现出不同的活性.然而,底物FeOx中的Fe同样是第VIII族中的3d过渡金属,却在低温下对CO氧化反应没有催化活性.我们围绕这一问题,重点研究了底物FeOx在负载单原子Pt1前后催化CO氧化的反应机理和活性,解释了单原子催化剂Pt1/FeOx相比于底物FeOx为何具有如此高的催化活性的原因.我们采用Vienna Ab-initio Simulation Package(VASP)从头算模拟软件和密度泛函理论(DFT)的广义梯度近似(GGA)进行了理论计算.其中,选择PBE泛函描述体系的交换关联相互作用,用投影缀加波(PAW)赝势基组方法描述体系中的电子和离子实之间的相互作用,对Fe原子采用了DFT+U方法进行d电子强相关校正,并使用Dimer计算方法搜寻反应过渡态.研究结果表明,底物FeOx中氧空位的再生伴随第二个CO2分子从催化剂表面脱附的过程需要较高的活化势垒(1.09 eV),这一过程是整个CO氧化反应的决速步.与此相比较,Pt1/FeOx催化剂中,由于Pt原子代替了表面Fe原子,导致电子结构及性质的显著变化,有利于CO的活化、氧化和CO2的脱附.我们从电子能量态密度(DOS)和Bader电荷分析及模型分子团簇的轨道相互作用的角度进一步分析了两种催化剂存在差异的本质;揭示了单原子催化剂Pt1/FeOx中Pt1和底物FeOx之间的相互作用的机理及催化剂表面Pt单原子在催化反应过程中的关键作用.     

多巴胺和L-精氨酸制备超轻氮掺杂石墨烯气凝胶吸油性能的研究

采用水热法制备了超轻氮掺杂石墨烯气凝胶。分析表征结果表明,多巴胺不仅为还原剂而且提供氮源,石墨烯溶液前躯体的pH值对水热法制备超轻氮掺杂石墨烯气凝胶很大的影响,通过调节多巴胺和L-精氨酸在石墨烯溶液前躯体的浓度,可制备密度为2.54 mg/cm³超轻氮掺杂石墨烯气凝胶,由于氮掺杂、低密度和大的比表面积,超轻氮掺杂石墨烯气凝胶对各种油品都有良好的吸附性能。     

Enzymetically Regulating the Self‐Healing of Protein Hydrogels with High Healing Efficiency

Enzyme‐mediated self‐healing of dynamic covalent bond‐driven protein hydrogels was realized by the synergy of two enzymes, glucose oxidase (GOX) and catalase (CAT). The reversible covalent attachment of glutaraldehyde to lysine residues of GOX, CAT, and bovine serum albumin (BSA) led to the formation and functionalization of the self‐healing protein hydrogel system. The enzyme‐mediated protein hydrogels exhibit excellent self‐healing properties with 100 % recovery. The self‐healing process was reversible and effective with an external glucose stimulus at room temperature.     

Determination of the n‐octanol/water partition coefficients of weakly ionizable basic compounds by reversed‐phase high‐performance liquid chromatography with neutral model compounds

A strategy to utilize neutral model compounds for lipophilicity measurement of ionizable basic compounds by reversed‐phase high‐performance liquid chromatography is proposed in this paper. The applicability of the novel protocol was justified by theoretical derivation. Meanwhile, the linear relationships between logarithm of apparent n‐octanol/water partition coefficients (logK_ow′′) and logarithm of retention factors corresponding to the 100% aqueous fraction of mobile phase (logk_w) were established for a basic training set, a neutral training set and a mixed training set of these two. As proved in theory, the good linearity and external validation results indicated that the logK_ow′′–logk_w relationships obtained from a neutral model training set were always reliable regardless of mobile phase pH. Afterwards, the above relationships were adopted to determine the logK_ow of harmaline, a weakly dissociable alkaloid. As far as we know, this is the first report on experimental logK_ow data for harmaline (logK_ow = 2.28 ± 0.08). Introducing neutral compounds into a basic model training set or using neutral model compounds alone is recommended to measure the lipophilicity of weakly ionizable basic compounds especially those with high hydrophobicity for the advantages of more suitable model compound choices and convenient mobile phase pH control.     

聚氰基丙烯酸乙酯空心纳米纤维的制备

通过溶液聚合法制备了具有空心结构的聚氰基丙烯酸乙酯纳米纤维,纤维直径为50~100 nm.研究了3种溶液体系对形成聚氰基丙烯酸乙酯纳米纤维形貌与直径的影响,并探讨了其形成机理.通过调控溶液体系内外环境可得到不同形貌的聚合物纤维,且纤维表面表现出疏水性质.该方法适用于平整且具有粗糙结构的表面.所形成的聚氰基丙烯酸乙酯纳米纤维涂层可用于基底的疏水改性.     

Controlled Synthesis of N‐Doped Carbon Nanospheres with Tailored Mesopores through Self‐Assembly of Colloidal Silica

Limited strategies have been established to prepare monodisperse mesoporous carbon nanospheres (MCNs) with tailored pore sizes. In this work, a method is reported to synthesize MCNs by combining polymerization of aniline with co‐assembly of colloidal silica nanoparticles. The controlled self‐assembly behavior of colloidal silica enables the formation of uniform composite nanospheres and convenient modulation over mesopores. After carbonization and removal of sacrificial templates, the resultant MCNs possess tunable mesopores (7–42 nm) and spherical diameters (90–300 nm), as well as high surface area (785–1117 m² g^?1), large pore volume (1.46–2.01 cm³ g^?1) and abundant nitrogen moieties (5.54–8.73 at %). When serving as metal‐free electrocatalysts for the oxygen reduction reaction (ORR), MCNs with an optimum pore size of 22 nm, compared to those with 7 and 42 nm, exhibit the best ORR performance in alkaline medium.