Lipid profiling of human plasma from peritoneal dialysis patients using an improved 2D (NP/RP) LC-QToF MS method

An improved online two-dimensional liquid chromatography-quadrupole time-of-flight mass spectrometry (2D LC-QToF MS) system was developed for the lipid profiling of human plasma, in which different lipid classes were separated by the first dimensional normal-phase (NP) LC and different lipid molecular species were separated by the second dimensional reversed-phase (RP) LC. This 2D LC-QToF MS system was built based on a ten-port, two-position valve as the interface, the conditions of which had been optimized and discussed in detail. As two loops were used to trap and transfer the first dimensional elute to the second dimension separately, this new interface suppressed the sample band broadening in the first dimensional column, increased the recovery and repeatability of 2D LC interface, and offered the possibility for the realization of not-stop-flow NP/RP 2D LC system. Finally, 190 endogenous lipid species out of 10 lipid classes were determined within a single run from the plasma of peritoneal patients. This method was also applied to identify the difference in lipid profile between plasma from peritoneal dialysis patients with bad volume status and peritoneal dialysis patients with good volume status. The discovery of 30 potential biomarkers would be helpful to the malnutrition, inflammation, and atherosclerosis syndrome investigation.     

Preparation and characterization of an imprinted monolith by atom transfer radical polymerization assisted by crowding agents

A method based on reverse atom transfer radical polymerization (R-ATRP) and molecular crowding has been used for design and synthesis of monolithic molecularly imprinted polymers (MIPs) capable of recognizing ibuprofen (IBU). 4-Vinylpyridine (4-VP) was used as the functional monomer, and ethylene glycol dimethacrylate (EDMA) was the crosslinking monomer. Azobisisobutyronitrile (AIBN)–CuCl₂–N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) was used as the initiating system. Compared with conventional radical polymerization-based IBU-MIPs, the imprinting effects of the obtained IBU-MIPs was enhanced, suggesting the merit of combination of reverse ATRP and molecular crowding. In addition, it was found that the polymerization time of the molecularly imprinted monolithic column, the amount of template, the degree of crosslinking, and the composition of mobile phase greatly affected retention of the template and the performance of molecular recognition .

Alginate‐Based Microcapsules with a Molecule Recognition Linker and Photosensitizer for the Combined Cancer Treatment

A reactive template method was used to fabricate alginate‐based hydrogel microcapsules. The uniform and well‐dispersed hydrogel capsules have a high drug loading capacity. After they are coated by a folate‐linked lipid mixture on the surface, the capsules possess higher cell uptake efficiency by the molecule recognition between folate and the folate‐receptor overexpressed by the cancer cells. Moreover, in this bioconjugate, the lipid could remarkably reduce the release rate of hydrophilic doxorubicin from the hydrogel microcapsules and encapsulate the hydrophobic photosensitizer hypocrellin B. The biointerfaced capsules could be used as drug carriers for combined treatment against cancer cell proliferation in vitro; this was much more effective than chemotherapy or photodynamic therapy alone.     

Practical synthesis of C1–8 fragment of autolytimycin via a chelation-controlled diastereoselective addition of diisopropenylzinc to α-methoxy aldehyde

The C1–8 fragment of autolytimycin was synthesized via a reliable 10-step route capable of delivering 41% overall yield at multi-gram scale. As a key step, a chelation-controlled isopropenylation of α-oxygenated aldehydes was established with a reagent combination of diisopropenylzinc, magnesium halide, and a dichloromethane/toluene mixed solvent. Cram-chelate isopropenylation products dominated for aldehydes with a small α-substituents, such as –OMe and –OBn groups, while the Felkin product could be obtained with a bulky –OTBS group.     

Study of the effect of laser treatment on the initial oxidation behaviour of Al‐coated NiCrAlY bond‐coat

In this study, the initial oxidation behaviour of laser‐treated Al/NiCrAlY bond‐coat is investigated. Two approaches, (i) Al film sputtering on the surface of bond‐coat and (ii) laser treatment, have been taken to enhance the oxidation resistance of NiCrAlY bond‐coat. Experimental results showed that after laser treatment, the Al/NiCrAlY bond‐coat exhibited a columnar dendritic microstructure without cracks and voids. A dense and continuous α‐Al₂O₃/Cr₂O₃ multilayer was found to form on the bond‐coat surface. Results on the cyclic oxidation at 1200 °C (for time ≤ 204 h) revealed that the laser‐treated Al/NiCrAlY bond‐coat exhibited better oxidation resistance compared to as‐sprayed NiCrAlY, Al/NiCrAlY and laser‐remelted NiCrAlY bond‐coat. The formation of θ‐Al₂O₃, NiO, Cr₂O₃ and NiCr₂O₄ spinel oxides was observed to be suppressed due to the preformed α‐Al₂O₃ scale during initial oxidation on the surface of laser pre‐oxidized Al/NiCrAlY bond‐coat. Copyright © 2013 John Wiley & Sons, Ltd.     

Dynamics of viscous fingers in Hele-Shaw cells of liquid crystals Theory and experiment

The theoretical and experimental developments in the interfacial dynamics and the formation of viscous fingering patterns in Hele-Shaw cells of liquid crystal-air systems are summarized and discussed. These include radial and linear cells with or without grooves engraved on the cell plates. Instabilities of fingers, the role of intrinsic and extrinsic anisotropies, etc., are emphasized. In a linear cell, when the injected air is kept at constant pressure, a whole sequence of successive instabilities of fingers (hump, tip-splitting, sidewrinkling, sidebranching and DLA-like structure) is observed in a single run of the experiment. In our theory, the equations of motion of nematic flows in Hele-Shaw cells are derived from the Ericksen-Leslie equations. In the linear approximation, the equations resemble those of isotropic liquids with the presence of effective viscosities and anisotropic surface tension. Experimental observations are interpreted with the introduction of an effective control parameter which may be time dependent. Special features of viscous fingers in liquid crystals in contrast to those in isotropic liquids, such as asymmetric dendritics, displacement of the finger from the central axis of the linear cell, and reentrant sequence of patterns, are pointed out. Plausible explanations of these phenomena are given. In this newly developed field, a large number of interesting problems remain to be solved.     

Synthesis and inclusion properties of pillar[n]arenes

A detailed study of the reaction conditions revealed that a quantitative cyclocondensation of 1,4-dialkoxy-2,5-bis(alkoxymethyl)-benzenes to pillar[n]arenes can be achieved by catalysis of p-toluenesulfonic acid in CH₂Cl₂. Major product of this new reaction is in each case a cyclopentamer (n = 5), but small amounts of the pillar[n]arenes with n = 6, 7 and 10 can be obtained as well. Different alkoxy groups in 1- and 4-position lead to regioisomers. All cyclooligomers exist in pillar structures as pair of enantiomers, which show a racemisation at room temperature, which is fast in terms of the NMR time scale. The racemisation process occurs by rotation of the 1,4-phenylene segments in the macrocyclic rings. Pillar[n]arenes exhibit novel host–guest behavior.     

Synthesis of β-cyclodextrin-calix[4]arene coupling product and its adsorption of basic fuchsin and methylene blue from water

Two new β-CD-calix[4]arene coupling products 3,4 which contained one or two β-CD units in molecules were synthesized by ammonolysis of p-tert-butyl-25,27-dihydroxyl-26,28-di (ethoxy carbonyl methoxyl) calix[4]arene 1 and mono-6-ethylenediamino-6-deoxy-β-CD 2, and their structures were confirmed by ¹H NMR, IR and MS (Maldi-Tof). The probable mechanism for forming 3 was discussed also. Using water-insoluble coupling product 3 as an adsorbent, the influences of the adsorption capacities of 3 including initial concentration, temperature and pH onto basic fuchsin (BF) and methylene blue (MB) from aqueous solution were investigated. Results showed that the adsorption capability of 3 to BF was obviously higher than that to MB at similar adsorption conditions. The values of %sorption to BF were over 90 % in range of initial concentrations from 20 to 140 mg L^?1 whenas those to MB dropped rapidly from 92 to 58 %. The adsorptions of 3 to both BF and MB obeyed Freundlich adsorption isotherm well.     

A quantum mechanics/molecular mechanics study on the hydrolysis mechanism of New Delhi metallo-β-lactamase-1

New Delhi metallo-β-lactamase-1 (NDM-1) has emerged as a major global threat to human health for its rapid rate of dissemination and ability to make pathogenic microbes resistant to almost all known β-lactam antibiotics. In addition, effective NDM-1 inhibitors have not been identified to date. In spite of the plethora of structural and kinetic data available, the accurate molecular characteristics of and details on the enzymatic reaction of NDM-1 hydrolyzing β-lactam antibiotics remain incompletely understood. In this study, a combined computational approach including molecular docking, molecular dynamics simulations and quantum mechanics/molecular mechanics calculations was performed to characterize the catalytic mechanism of meropenem catalyzed by NDM-1. The quantum mechanics/molecular mechanics results indicate that the ionized D124 is beneficial to the cleavage of the C–N bond within the β-lactam ring. Meanwhile, it is energetically favorable to form an intermediate if no water molecule coordinates to Zn2. Moreover, according to the molecular dynamics results, the conserved residue K211 plays a pivotal role in substrate binding and catalysis, which is quite consistent with previous mutagenesis data. Our study provides detailed insights into the catalytic mechanism of NDM-1 hydrolyzing meropenem β-lactam antibiotics and offers clues for the discovery of new antibiotics against NDM-1 positive strains in clinical studies.