Expedient Synthesis of Ketones via N‐Heterocyclic Carbene/Nickel‐Catalyzed Redox‐Economical Coupling of Alcohols and Alkynes†

An N‐heterocyclic carbene/nickel‐catalyzed direct coupling of alcohols and internal alkynes to form α‐branched ketones has been developed. This methodology provides a new approach to afford branched ketones, which are difficult to access through the hydroacylation of simple internal alkenes with aldehydes. This redox‐neutral and redox‐economical coupling is free from any oxidative or reductive additives as well as stoichiometric byproducts. These reactions convert both benzylic and aliphatic alcohols and alkynes, two basic feedstock chemicals, into various α‐branched ketones in a single chemical step.     

Porous surfur-doped hard carbon for excellent potassium storage

Hard carbon is promising anode for potassium-ion batteries(PIBs),however,the poor rate capability hinders its development as potential anode.To address this question,we design a sulfur-doped porous hard carbon(S-HC)for PIBs through the combination of structural design and composition adjustment.The as-designed S-HC exhibits a long cycling life with^191 mAh/g after 300 cycles at 1 A/g,and an excellent rate capability with^100 mAh/g at 5 A/g,which was attributed to its structural characteristics and compositions.The S-HC demonstrates to be promising anode in the future.     

Diphenyl cyclopropenone-centered polymers for site-specific CO-releasing and chain dissociation

The synthesis and stimuli-responsiveness of a diphenyl cyclopropenone(DPCP)-centered poly(methyl acrylate)(PMA)are presented.DPCP-centered PMA could release carbon monoxide(CO)upon UV light in a switched on-and-off manner.The CO-releasing process can be reported by the variations in photoluminescence spectra.In addition,DPCP moiety covalently embedded in the crosslinked polyurethane could also release CO under UV light.Of special,DPCP-centered PMA in solution was selectively dissociated at the phenol ester bond under the ultrasound,and a force-induced hydrolyzation reaction was revealed by D20 exchanging^1 H NMR spectra.The kinetic study reveals that small quantity of water could enhance the chain scission rate.This work provides a DPCP-centered polymer for sitespecific CO-releasing and chain dissociation.     

Constructing spin-adiabatic states for the modeling of spin-crossing reactions. I. A shared-orbital implementation

In the modeling of spin-crossing reactions, it has become popular to directly explore the spin-adiabatic surfaces. Specifically, through constructing spin-adiabatic states from a two-state Hamiltonian (with spin-orbit coupling matrix elements) at each geometry, one can readily employ advanced geometry optimization algorithms to acquire a “transition state” structure, where the spin crossing occurs. In this work, we report the implementation of a fully-variational spin-adiabatic approach based on Kohn-Sham density functional theory spin states (sharing the same set of molecular orbitals) and the Breit-Pauli one-electron spin-orbit operator. For three model spin-crossing reactions (predissociation of N₂O, singlet-triplet conversion in CH₂, and CO addition to Fe(CO)₄), the spin-crossing points were obtained. Our results also indicated the Breit-Pauli one-electron spin-orbit coupling can vary significantly along the reaction pathway on the spin-adiabatic energy surface. On the other hand, due to the restriction that low-spin and high-spin states share the same set of molecular orbitals, the acquired spin-adiabatic energy surface shows a cusp (ie, a first-order discontinuity) at the crossing point, which prevents the use of standard geometry optimization algorithms to pinpoint the crossing point. An extension with this restriction removed is being developed to achieve the smoothness of spin-adiabatic surfaces.     

手性钙钛矿纳米材料的构筑及光电性能

金属卤化物钙钛矿纳米材料因其丰富的化学结构和优异的光电性能,已成为一种极具应用前景的半导体材料。在钙钛矿无机框架中引入有机手性分子后,能够比较容易地得到手性钙钛矿纳米材料,从而可以极大地推动智能光电材料和自旋电子器件的快速发展。本文将综述手性钙钛矿纳米材料的构筑与手性产生机理的最新研究进展,包括一维手性钙钛矿纳米线、二维及准二维手性有机-无机杂化钙钛矿纳米片、三维手性钙钛矿纳米晶、超分子组装体系中诱导的手性钙钛矿纳米晶等。值得注意的是,不同种类的手性钙钛矿纳米材料在圆二色性、圆偏振发光、铁电性、自旋电子学等方面展现出优异的光电性能及巨大的应用前景。但是,有关手性钙钛矿纳米材料的研究目前还处于初级阶段,其中很多机理还存在争议,许多基础性和应用型的工作也有待开展。     

Antiperovskite Intermetallic Nanoparticles for Enhanced Oxygen Reduction

Antiperovskite Co₃InC_0.7N_0.3 nanomaterials with highly enhanced oxygen reduction reaction (ORR) performance were prepared by tuning nitrogen contents through a metal–organic framework (MOF)‐derived strategy. The nanomaterial surpasses all reported noble‐metal‐free antiperovskites and even most perovskites in terms of onset potential (0.957 V at J=0.1 mA cm^?2) and half‐wave potential (0.854 V). The OER and zinc–air battery performance demonstrate its multifunctional oxygen catalytic activities. DFT calculation was performed and for the first time, a 4 e^? dissociative ORR pathway on (200) facets of antiperovskite was revealed. Free energy studies showed that nitrogen substitution could strengthen the OH desorption as well as hydrogenation that accounts for the enhanced ORR performance. This work expands the scope for material design via tailoring the nitrogen contents for optimal reaction free energy and hence performance of the antiperovskite system.     

Designing Sub‐2 nm Organosilica Nanohybrids for Far‐Field Super‐Resolution Imaging

Stimulated emission depletion (STED) microscopy enables ultrastructural imaging of biological samples with high spatiotemporal resolution. STED nanoprobes based on fluorescent organosilica nanohybrids featuring sub‐2 nm size and near‐unity quantum yield are presented. The spin–orbit coupling (SOC) of heavy‐atom‐rich organic fluorophores is mitigated through a silane‐molecule‐mediated condensation/dehalogenation process, resulting in bright fluorescent organosilica nanohybrids with multiple emitters in one hybrid nanodot. When harnessed as STED nanoprobes, these fluorescent nanohybrids show intense photoluminescence, high biocompatibility, and long‐term photostability. Taking advantage of the low‐power excitation (0.5 μW), prolonged singlet‐state lifetime, and negligible depletion‐induced re‐excitation, these STED nanohybrids present high depletion efficiency (>96 %), extremely low saturation intensity (0.54 mW, ca. 0.188 MW cm^?2), and ultra‐high lateral resolution (ca. λ_em/28).     

General Strategy for Synthesis of Ordered Pt3M Intermetallics with Ultrasmall Particle Size

Controllable synthesis of atomically ordered intermetallic nanoparticles (NPs) is crucial to obtain superior electrocatalytic performance for fuel cell reactions, but still remains arduous. Herein, we demonstrate a novel and general hydrogel‐freeze drying strategy for the synthesis of reduced graphene oxide (rGO) supported Pt₃M (M=Mn, Cr, Fe, Co, etc.) intermetallic NPs (Pt₃M/rGO‐HF) with ultrasmall particle size (about 3 nm) and dramatic monodispersity. The formation of hydrogel prevents the aggregation of graphene oxide and significantly promotes their excellent dispersion, while a freeze‐drying can retain the hydrogel derived three‐dimensionally (3D) porous structure and immobilize the metal precursors with defined atomic ratio on GO support during solvent sublimation, which is not afforded by traditional oven drying. The subsequent annealing process produces rGO supported ultrasmall ordered Pt₃M intermetallic NPs (≈3 nm) due to confinement effect of 3D porous structure. Such Pt₃M intermetallic NPs exhibit the smallest particle size among the reported ordered Pt‐based intermetallic catalysts. A detailed study of the synthesis of ordered intermetallic Pt₃Mn/rGO catalyst is provided as an example of a generally applicable method. This study provides an economical and scalable route for the controlled synthesis of Pt‐based intermetallic catalysts, which can pave a way for the commercialization of fuel cell technologies.     

B(C6F5)3-Catalyzed Conjugate Addition Reactions: Addition of C–H Aromatics as Nucleophiles to Nitroalkenes

Russian Journal of Organic Chemistry - A mild and efficient B(C6F5)3-catalyzed conjugate addition of N, N-dialkylanilines to aromatic nitroalkenes is reported. The catalyst shows excellent...     

Preparation and characterization of n-octadecane-based reversible gel as form-stable phase change materials for thermal energy storage

Journal of Thermal Analysis and Calorimetry - In this study, a series of gelators (Gn, n is the number of carbon atoms of used fatty alcohol, n?=?2, 4, 6, 8, 10, 12, 14, 16 and 18) were...