Cross‐linked starch‐based polymer as an SPE material for the determination of nitrophenols at trace levels in environmental water

SPE using a cross‐linked starch‐based polymer (CSMDI) as an adsorbent for the determination of four nitrophenols at trace levels from aqueous solution was investigated. The CSMDI was synthesized from native starch using 4,4′‐methylenebisphenyldiisocyanate as a cross‐linking agent in dry DMF. Parameters affecting the extraction efficiency including the pH of the water sample, type of eluent and its volume, flow rate, sample volume, and methanol content were investigated and optimized. The optimized results exhibited excellent linear relationships (R² > 0.995) for all the nitrophenols over the range of 2.0–200 ng/mL, with the RSD values in the range of 2.9–5.7% (n = 5). The LODs ranged from 0.08–0.34 ng/mL (S/N = 3) for the four nitrophenols tested under optimum conditions. The developed method has been successfully applied for the analysis of several real environmental water samples including tap, river, and reservoir water. These results indicated that the CSMDI had a tremendous potential for the enrichment and determination of nitrophenols at trace levels in environmental water samples.     

铕配合物共掺杂电致发光器件效率滚降的延缓(英文)

将Alq3[tris(8-hydroxyquinoline)aluminium]和Eu(TTA)3phen(TTA=thenoyltrifluoroacetone,phen=1,10-phenanthroline)共掺杂进入主体材料CBP(4,4′-N,N′-dicarbazole-biphenyl)中,我们制作并研究了一系列电致发光器件。经过优化Alq3的掺杂浓度,在不改变色纯度的情况下,器件的效率滚降被大幅降低并获得了近乎加倍的最大亮度。发光层中的Alq3分子不仅促进了电子的注入和传输,还延缓了空穴的传输。借助电致发光光谱,我们证实Alq3分子作为阶梯加速空穴从CBP分子到Eu(TTA)3phen分子的迁移,从而促进了电子和空穴在Eu(TTA)3phen分子上的平衡。因此,我们认为器件的效率滚降受到抑制的原因有两点:一是复合区间的加宽,二是Eu(TTA)3phen分子上空穴和电子的分布更加平衡。     

金属离子为探针分光光度法测定半胱氨酸

在pH 10.0的氨水-氯化铵缓冲溶液中半胱氨酸与钴(Ⅱ)或镍(Ⅱ)能生成金属络合物,其吸收峰分别位于284,274nm处;当钴(Ⅱ)的浓度为2×10-4 mol·L-1时,与之反应的半胱氨酸浓度在2.5×10-5~2.0×10-4 mol·L-1范围内与相应的吸光度之间呈线性关系,而当加入镍(Ⅱ)的浓度为1×10-4 mol·L-1时,则与之反应的半胱氨酸浓度在1.0×10-5~2.0×10-4 mol·L-1范围内与其吸光度之间呈线性关系。据此,提出可分别用钴(Ⅱ)或镍(Ⅱ)作为探针,以分光光度法测定半胱氨酸的含量。该方法可用于尿液中半胱氨酸的测定,加标回收率在95.7%~101%之间,测定值的相对标准偏差(n=5)在0.9%~3.3%之间。     

4-氯苯氧乙酸和1,10-邻菲啰呤构筑的双核铽配合物的晶体结构,荧光和生物活性(英文)

水热条件下采用Tb(NO3)3·6(H2O),4-氯苯氧乙酸和1,10-邻菲啰呤作为反应物合成出1个双核铽配合物[Tb2(4-Hcpoa)5(phen)2(NO3)](1)(4-Hcpoa=4-氯苯氧乙酸,phen=1,10-邻菲啰呤),并分别用元素分析、红外光谱、差热分析、X-射线粉末衍射和X-射线单晶衍射等表征了该结构。晶体结构分析结果表明:2个双齿和2个三齿4-氯苯氧乙酸配体将2个铽金属离子连接成二聚体结构。荧光分析表明常温固态下配合物1发射绿色荧光,且在544 nm处的荧光寿命为0.920 ms。以除草剂精喹禾灵为对照品,研究了配体4-氯苯氧乙酸及其配合物1对甘蓝型油菜和钝芒稗的抑制作用。     

A Facile Approach for Synthesis of Benzofuro[2,3‐c]pyridines via Intramolecular Cascade Annulations

A facile synthesis of benzofuro[2,3‐c]pyridines has been achieved under mild conditions by using ammonium acetate as the nitrogen source through intramolecular cascade annulation. This reaction could efficiently construct pyridine ring and furan ring in one step. Moreover, the key annulation step was demonstrated through dihydrobenzofuran intermediates.     

Simultaneous determination of dihydroxybenzene isomers utilizing a thiadiazole film electrode

The present study reports a sensitive electro-analytical method for the simultaneous determination of dihydroxybenzene isomers by using a thiadiazole film electrode, which was readily prepared by electropolymerization of 2,5-dimercapto-1,3,4-thiadiazole on a glassy carbon electrode with cyclic voltammetry. The functionalized electrode has a distinguishable and sensitive response to dihydroxybenzene isomers. Under the optimized conditions, the linear stripping peak currents showed good linear relationships with hydroquinone, catechol and resorcinol at concentration ranges 0.50-120, 0.50-110 and 1.00-110 μmol/L, and the detection limits are 0.1, 0.1 and 0.3 μmol/L, respectively. The proposed method is applicable to the simultaneous determination of dihydroxybenzene isomers in real samples with the relative standard deviations of less than 5.7% and the recovery rates of 95.6%-106%. The constructed electrode is characterized by simple preparation, good selectivity, and high sensitivity advantages.     

Synthesis and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 as a concentration-gradient cathode material for lithium batteries

A well-ordered and spherical LiNi0.6Co0.2Mn0.2O2 cathode material was successfully synthesized from Ni and Mn concentration-gradient precursors via co-precipitation. The crystal structure, morphology and electrochemical properties of LiNi0.6Co0.2Mn0.2O2 were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, and charge-discharge tests. The material delivered an initial discharge capacity of 174.3 mAh/g at 180 mA/g （1 C rate） between 2.8 and 4.3 V and more than 93.1% of that was retained after 100 cycles. In addition, it also exhibited excellent rate capability, high cut-off voltage and temperature performance.     

Cycloaddition reactions of benzyne with olefins

Some novel cycloaddition reactions based on benzyne and olefins have been developed.These reactions were performed in the absence of a transition metal catalyst,and they displayed good yields.These cycloaddition reactions of benzyne with olefins provide effective routes for synthesizing benzocyclobutenes,biaryl compounds and 9,10-dihydrophenanthrene derivatives.     

Electrochemical sensor based on f-SWCNT and carboxylic group functionalized PEDOT for the sensitive determination of bisphenol A

A simple,sensitive,and reliable method for the voltammetric determination of bisphenol A(BPA) by using carboxylic group functionalized single-walled carbon nanotubes(f-SWCNT)/carboxylic-functionalized poly(3,4-ethylenedioxythiophene)(PC4) complex modified glassy carbon electrode(GCE) has been successfully developed.The electrochemical behavior of BPA at the surface of the modified electrode is investigated by electrochemical techniques.The cyclic voltammetry results show that the as-prepared electrode exhibits strong catalytic activity toward the oxidation of BPA with a well-defined anodic peak at 0.623 V in PBS(0.1 mol/L,pH 7.0).The surface morphology of the 3D network of composite film is beneficial for the adsorption of analytes.Under the optimized conditions,the oxidation peak current is proportional to BPA concentration in the range between 0.099 and 5.794 μmol/L(R~2 = 0.9989),with a limit of detection of 0.032 μmol/L(S/N = 3).The enhanced performance of the sensor can be attributed to the excellent electrocatalytic property of/-SWCNT and the extraordinary conductivity of PC4.Furthermore,the proposed modified electrode displays high stability and good reproducibility.The good result on the voltammetric determination of BPA also indicates that the asfabricated modified electrode will be a good candidate for the electrochemical determination and analysis of BPA.     

1,4-二酮吡咯并吡咯在聚合物太阳能电池的应用

1,4-二酮吡咯并吡咯(DPP)由于具有优异的共平面性和强烈的拉电子能力,从而被引入D-A型窄带隙共轭聚合物中调控聚合物材料的能隙和能级结构,拓宽在可见光区域的响应范围。近年来,DPP类聚合物太阳能电池材料的研究受到广泛关注,目前基于DPP的聚合物太阳能电池效率高已达9.64%。本文探讨了以DPP作为受体单元而噻吩衍生物、芴、咔唑和苯并二噻吩等作为给体单元制成的D-A型窄带隙共轭聚合物太阳能电池的研究进展,并探讨了聚合物材料结构与太阳能电池性能之间的内在构效关系。