嫁接法制备Ni/SBA-15催化剂的催化氯苯加氢脱氯

SBA-15表面经嫁接方式引入氨基官能团,与Ni络合制备了SBA-15负载的Ni催化剂(Ni/SBA-15N)。同时,采用传统的浸渍法制备了具有相似Ni负载量的催化剂(Ni/SBA-15)。在负载量相近条件下,Ni/SBA-15N的Ni颗粒分散性均高于Ni/SBA-15。XRD和TPR结果表明,催化剂焙烧后,在氨化SBA-15表面,Ni以硅酸镍形式存在,而在SBA-15表面,Ni以NiO形式存在。Ni/SBA-15对氯苯催化加氢脱氯活性不随Ni负载量的变化而变化;而在Ni/SBA-15N中,Ni负载量增加,催化剂活性增加。     

MnO_x-CeO_2上表面氧性质及其催化碳烟燃烧性能

运用TPO,XRD,BET,O2-TPD,H2-TPR,XPS等技术,研究了在CeO2中引入不同Mn含量对催化剂表面氧性质的影响,并重点探讨了吸附于氧空位上的原子吸附氧O-与催化碳烟燃烧活性的关联。结果表明:将Mn中引入CeO2后,MnOx-CeO2晶格中可形成较CeO2更多的氧空位,并有利于氧的活化和迁移,生成了较多原子吸附氧O-;MnOx(0.4)-CeO2在碳烟起燃温度区间有最多的原子吸附氧O-,其碳烟起燃活性最高,对应的起燃温度是346℃,比无催化剂时降低了111℃,比CeO2降低了35℃。     

冠醚环化二硫烯双核Au(I)配合物的合成、结构及电化学性质

合成了含有冠醚环化二硫烯的双核Au(I)配合物[(30-C2S4)Au2(PPh3):](1),[(40-C2S4)Au2·(PPh3)2](2),[(30一C6-S8)Au2(Pph3)2](3)和[(40-C6-S8)Au2(PPh3)2](4)以及富硫配合物[(btdt)Au2·(PPh3)2](5).通过x射线...     

磁性离子液体中聚乙撑二氧噻吩/多壁碳纳米管纳米复合材料的球磨法制备及表征

以磁性离子液体1-丁基-3-甲基咪唑四氯化铁盐([bmim]FeCl₄)为介质, 将多壁碳纳米管(MWCNTs)机械球磨分散在其中形成[bmim]FeCl₄/MWCNTs凝胶后, 加入乙撑二氧噻吩(EDOT)单体, 利用阴离子 的氧化性进行原位聚合, 球磨法制备了均匀包覆不同含量MWCNTs的聚乙撑二氧噻吩/多壁碳纳米管(PEDOT/MWCNTs)纳米复合材料. 并以傅里叶红外光谱(FT-IR)、扫描电镜(SEM)和透射电镜(TEM)对PEDOT/MWCNTs的结构与形貌进行了表征|在0.5 mol/L硫酸溶液中, 用循环伏安测试(CV)研究了PEDOT/MWCNTs的电化学行为|采用四探针仪测定了PEDOT/MWCNTs的电导率|热重分析(TGA)研究了PEDOT/MWCNTs的热稳定性. 结果表明, PEDOT 纳米颗粒均匀包覆于MWCNTs表面, 形成了核壳结构|PEDOT与MWCNTs之间的共轭作用随着MWCNTs含量的增加而增强. MWCNTs的质量分数为30%的PEDOT/MWCNTs的电导率出现峰值, 达到7.46 S/cm, 且电化学活性最好. MWCNTs的质量分数为10%时, PEDOT/MWCNTs的热稳定性相对于PEDOT显著提高.     

分散液相微萃取-气相色谱法检测尿中的三种苯并二氮杂(革)类药物

建立了分散液相微萃取与气相色谱电子捕获法检测尿中三种苯并二氮杂(革)类药物的方法.对影响萃取富集效率的因素进行优化,萃取条件选定为:将0.75 mL含有35 μL氯苯的甲醇混合溶液快速注入到5.0mL样品溶液中,分散混匀后,以4000 r/min离心4min,吸取有机相直接进样分析.在优化条件下,三种药物在1～400μ...     

Boronic Acid functionalized core-shell polymer nanoparticles prepared by distillation precipitation polymerization for glycopeptide enrichment

The boronic acid-functionalized core-shell polymer nanoparticles, poly(N,N-methylenebisacrylamide-co-methacrylic acid)@4-vinylphenylboronic acid (poly(MBA-co-MAA)@VPBA), were successfully synthesized for enriching glycosylated peptides. Such nanoparticles were composed of a hydrophilic polymer core prepared by distillation precipitation polymerization (DPP) and a boronic acid-functionalized shell designed for capturing glycopeptides. Owing to the relatively large amount of residual vinyl groups introduced by DPP on the core surface, the VPBA monomer was coated with high efficiency, working as the shell. Moreover, the overall polymerization route, especially the use of DPP, made the synthesis of nanoparticles facile and time-saving. With the poly(MBA-co-MAA)@VPBA nanoparticles, 18?glycopeptides from horseradish peroxidase (HRP) digest were captured and identified by MALDI-TOF mass spectrometric analysis, relative to eight glycopeptides enriched by using commercially available meta-aminophenylboronic acid agarose under the same conditions. When the concentration of the HRP digest was decreased to as low as 5?nmol, glycopeptides could still be selectively isolated by the prepared nanoparticles. Our results demonstrated that the synthetic poly(MBA-co-MAA)@VPBA nanoparticles might be a promising selective enrichment material for glycoproteome analysis.     

具有光引发活性RAFT链转移剂的合成与应用

以4-溴甲基二苯甲酮,3-巯基丙酸和二硫化碳为原料合成了RAFT链转移剂——3-(4-苯甲酰基苯基甲硫基硫代羰基硫基)丙酸(2),产率91.5%,其结构经NMR,IR和元素分析表征。以2为RAFT链转移剂和光引发剂,通过甲基丙烯酸烯丙酯的乳液聚合制得反应性聚甲基丙烯酸烯丙酯。     

阿奇霉素在多壁碳纳米管修饰电极上的电化学行为及其测定

运用循环伏安法与线性扫描伏安法研究了阿奇霉素在多壁碳纳米管修饰玻碳电极上的电化学行为,建立了一种直接测定阿奇霉素的电化学分析方法。结果表明,与裸玻碳电极相比,多壁碳纳米管修饰电极能显著提高阿奇霉素的氧化峰电流,阿奇霉素的电极过程完全不可逆,存在典型的吸附特性。在优化的实验条件下,氧化峰电流与阿奇霉素浓度在3.0×10-7～2.5×10-5 mol/L和2.5×10-5～5.0×10-4 mol/L范围内呈现良好的线性关系,检出限为1.0×10-7 mol/L。     

Enzymetically Regulating the Self‐Healing of Protein Hydrogels with High Healing Efficiency

Enzyme‐mediated self‐healing of dynamic covalent bond‐driven protein hydrogels was realized by the synergy of two enzymes, glucose oxidase (GOX) and catalase (CAT). The reversible covalent attachment of glutaraldehyde to lysine residues of GOX, CAT, and bovine serum albumin (BSA) led to the formation and functionalization of the self‐healing protein hydrogel system. The enzyme‐mediated protein hydrogels exhibit excellent self‐healing properties with 100 % recovery. The self‐healing process was reversible and effective with an external glucose stimulus at room temperature.