Mullite crystallization using fully hydrolyzed silica sol: the gelation temperature influence

Mullite is an aluminosilicate widely used as a structural material for high temperature applications. This paper studies the effect of the gelation temperature on the synthesis of two mullite precursors: polymeric and colloidal silica, using both in fully-hydrolyzed silica sol, derived from sodium silicate. The gels were synthesized using aqueous silicic acid and aluminum nitrate. Ethylene glycol was added into polymeric gels. Two gelation temperatures were used: 80 and 100 °C. In the polymeric precursor, the increasing of the gelation temperature caused an increase in the silica incorporation inside the mullite crystalline lattice at 1,000 °C, and it also generated an increase in the reaction extent at all calcination temperatures. In the colloidal precursors, these effects were more intense than in the polymeric precursors in terms of yield. Colloidal samples calcined at 1,250 °C crystallized cristobalite and alpha alumina in addition to mullite when they were previously gelled at 80 °C. On the other hand, the same sample gelled at 100 °C led to only crystallized mullite. The reaction extent increased by more than 20 % for colloidal samples gelled at 100 °C compared to colloidal samples gelled at 80 °C (calcined at 1,250 °C). This increase was due to the almost total incorporation of alumina and silica in the crystalline lattice of mullite.     

Synthesis of (1′S*,2R*,3R*)- and (1′S*,2R*,3S*)-N-arylsulfonyl-2-(1′-halogenethyl)-3-methylindolines and their selective toxicity against SH-SY5Y cell line

N-tosyl-2- and N-tosyl-4-halogen-substituted derivatives of 2-(1-methylbut-2-en-1-yl)aniline were synthesized and their molecular iodine-mediated cyclization was investigated. The cyclization upon interaction of N-tosyl-6-methyl-2-(1-methylbut-2-en-1-yl)aniline with molecular iodine in methyl tert-butyl ether or acetonitrile was studied, as well as the interaction of this sulfonamide with N-bromosucinimide in dichloromethane. Synthesized (2R*,3R*)- and (2R*,3S*)-N-arylsulfonyl-2-(1-halogenoethyl)-3-methylindoline derivatives showed cytotoxic activity against HEK293 cells, SH-SY5Y, Jurkat, and HepG2 cell lines. The compounds (2R*,3S*)-N-arylsulfonyl-7-bromo-2-(1-halogenoethyl)-3-methylindoline cis- 4a , stereoisomeric (2R*,3R*)-trans- 4h and (2R*,3S*)-N-tosyl-7-chloro-2-(1-halogenoethyl)-3-methylindoline cis- 4h demonstrated selective toxicity against SH-SY5Y cell line (IC₅₀ ≈ 3 ÷ 5 μM), and did not affect HEK293, Jurkat, and HepG2 cells.     

Identification of pyrrolo-pyridine derivatives as novel class of antibacterials

Molecular Diversity - A series of 5-oxo-4H-pyrrolo[3,2-b]pyridine derivatives was identified as novel class of highly potent antibacterial agents during an extensive large-scale high-throughput...     

Revisiting the construction of gap functions for variational inequalities and equilibrium problems via conjugate duality

Based on conjugate duality we construct several gap functions for general variational inequalities and equilibrium problems, in the formulation of which a so-called perturbation function is used. These functions are written with the help of the Fenchel-Moreau conjugate of the functions involved. In case we are working in the convex setting and a regularity condition is fulfilled, these functions become gap functions. The techniques used are the ones considered in [Altangerel L., Bo? R.I., Wanka G., On gap functions for equilibrium problems via Fenchel duality, Pac. J. Optim., 2006, 2(3), 667–678] and [Altangerel L., Bo? R.I., Wanka G., On the construction of gap functions for variational inequalities via conjugate duality, Asia-Pac. J. Oper. Res., 2007, 24(3), 353–371]. By particularizing the perturbation function we rediscover several gap functions from the literature. We also characterize the solutions of various variational inequalities and equilibrium problems by means of the properties of the convex subdifferential. In case no regularity condition is fulfilled, we deliver also necessary and sufficient sequential characterizations for these solutions. Several examples are illustrating the theoretical aspects.     

Study of the coercive force in ferromagnetic dysprosium metal by RF field enhancement

The RF field enhancement factor η is calculated for the domains and domain walls of ferromagnetic Dy metal. In the domains η ? 30, while in the walls it depends on the coercive force which limits the wall motion. The study of η from spin echo signals of nuclei in the walls is used to determine this coercive force in powder of Dysprosium metal, before and after annealing.     

Grating-mediated waveguiding

We propose a method of optical waveguiding, which relies on Bragg diffractions from a 1D grating that gives rise to waveguiding in the direction normal to the grating wave vector. The waveguide structure consists of a shallow 1D grating that has a bell- or trough-shaped amplitude in the confinement direction. Finally, we provide an experimental proof of the concept for this mechanism.     

Two photon absorption and coherent control with broadband down-converted light

We experimentally demonstrate two-photon absorption with broadband down-converted light (squeezed vacuum). Although incoherent and exhibiting the statistics of a thermal noise, broadband down-converted light can induce two-photon absorption with the same sharp temporal behavior as femtosecond pulses, while exhibiting the high spectral resolution of the narrow band pump laser. Using pulse-shaping methods, we coherently control two-photon absorption in rubidium, demonstrating spectral and temporal resolutions that are 3-5 orders of magnitude below the actual bandwidth and temporal duration of the light itself. Such properties can be exploited in various applications such as spread-spectrum optical communications, tomography, and nonlinear microscopy.     

Detection of specific Bacillus anthracis spore biomarkers by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

Analysis by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was applied for the characterization of Bacillus anthracis spore biomarkers. B. anthracis spores were extracted under a simple procedure, followed by linear mode analysis, using sinapinic acid as the matrix. Several markers with a mass range of 4-7 kDa were detected in three B. anthracis strains: Vollum, Sterne and V770-NP1-R. Similar spectra were also obtained for spore extracts of two members of the B. cereus group: B. thuringiensis and B. cereus, but not for B. mycoides, B. subtilis or B. licheniformis, suggesting that these markers are specific to closely related members of the B. cereus group. When alpha-cyano-4-hydroxycinnamic acid was used as the matrix, at least four additional new markers within a mass range of 2-4 kDa could be detected in all B. anthracis spore extracts. These markers, corresponding to a molecular weight of 2528.3, 2792.4, 3077.4, and 3590.7 Da, have not been observed in extracts of the three closely related Bacillus species - B. cereus, B. thuringiensis and B. mycoides. These unique B. anthracis biomarkers, which were isotopically resolved and reproducibly detected in the highly accurate MALDI-TOFMS reflectron mode, may be useful as a basis for rapid and specific identification of B. anthracis strains.     

Simultaneous determination of methylxanthines in different types of tea by a newly developed and validated TLC method

The aim of this paper is to develop a new simple, fast and economical method for simultaneous quantitative determination of methylxanthine compounds based on TLC combined with image analysis. To obtain certain results, both extraction and chromatographic separation were optimized. The optimum extraction conditions were maceration in ethanol-water 8:2, v/v. The chromatographic separations were done on the silica gel F(254) TLC plates developed with chloroform-dichloromethane-isopropanol, 4:2:1 v/v/v. Detection was performed under UV lamp at 254?nm and the evaluation of the chromatographic plate was based on digital processing of chromatographic images. The developed TLC method was validated for parameters such as specificity, linearity and range, LOD and LOQ, precision, robustness and accuracy. This method was then applied for determination of caffeine, theobromine and theophylline in different types of tea, commercially available. Moreover, the content of methylxanthines detected and determined in commercial tea samples can be used as chemical marker in quality control.     

Fresnel incoherent correlation hologram—— a review （Invited Paper）

Holographic imaging offers a reliable and fast method to capture the complete three-dimensional （3D） information of the scene from a single perspective. We review our recently proposed single-channel optical system for generating digital Fresnel holograms of 3D real-existing objects illuminated by incoherent light. In this motionless holographic technique, light is reflected, or emitted from a 3D object, propagates through a spatial light modulator （SLM）, and is recorded by a digital camera. The SLM is used as a beamsplitter of the single-channel incoherent interferometer, such that each spherical beam originated from each object point is split into two spherical beams with two different curve radii. Incoherent sum of the entire interferences between all the couples of spherical beams creates the Fresnel hologram of the observed 3D object. When this hologram is reconstructed in the computer, the 3D properties of the object are revealed.