Lie symmetries and nonlocally related systems of the continuous and discrete dispersive long waves system by geometric approach

By using the extended Harrison and Estabrook's differential forms approach, in this paper, we investigate the Lie symmetries of the continuous and discrete dispersive long waves system, respectively. Based on this method, two closed ideals written in terms of a set of differential forms are constructed for the dispersive long waves systems. Furthermore, some invariant solutions are presented for such systems. By a direct computation, it is shown that the discrete dispersive long waves system admits a Kac-Moody-Virasoro type and a Virasoro-like type Lie algebra, respectively. Finally, we present an interesting relationship between the continuous case and a modified dispersive long waves system, which can be used to find nonlocal properties for such systems with each other.     

由偏微支配的系统的最优控制理论中的奇异摄动方法*

本文介绍了由偏微分方程支配的系统的最优控制理论中有关应用奇异摄动方法时出现的各种问题。考虑了渐近分析来自状态方程。或来自性能指标函数,也考虑了状态方程是定义在摄动域内的情形。     

Effect of mechanical force on domain switching in BiFeO_3 ultrathin films

Ferroelectric polarization can be switched by an external applied electric field and may also be reversed by a mechanical force via flexoelectricity from the strain gradient.In this study,we report the mechanical writing of an epitaxial BiFeO3(BFO)thin film and the combined action of an applied mechanical force and electric field on domain switching,where the mechanical force and electric field are applied using the tip of atomic force microscopy.When the applied force exceeds the threshold value,the upward polarization of the BFO thin film can be reversed by pure mechanical force via flexoelectricity;when an electric field is simultaneously applied,the mechanical force can reduce the coercive electric field because both the piezoelectricity from the homogeneous strain and the flexoelectricity from strain gradient contribute to the internal electric field in the film.The mechanically switched domains exhibit a slightly lower surface potential when compared with that exhibited by the electrically switched domains due to no charge injection in the mechanical method.Furthermore,both the mechanically and electrically switched domains exhibit a tunneling electroresistance in the BFO ferroelectric tunnel junction.     

CaPtAs: A new noncentrosymmetric superconductor

We report the discovery of a new noncentrosymmetric superconductor CaPtAs.It crystallizes in a tetragonal structure(space group I41md,No.109),featuring three dimensional honeycomb networks of Pt-As and a much elongated c-axis(a=b=4.18?,and c=43.70?).The superconductivity of CaPtAs with Tc=1.47 K was characterized by means of electrical resistivity,specific heat,and ac magnetic susceptibility.The electronic specific heat Ce(T)/T shows evidence for a deviation from the behavior of a conventional BCS superconductor,and can be reasonably fitted by a p-wave model.The upper critical fieldμ0Hc2 of CaPtAs exhibits a moderate anisotropy,with an in-plane value of around 204 mT and an out-of-plane value of 148 mT.Density functional theory calculations indicate that the Pt-5 d and As-4 p orbitals mainly contribute to the density of states near the Fermi level,showing that the Pt-As honeycomb networks may significantly influence the superconducting properties.     

一种脉冲强电流条件下导线电阻测量方法

在超强激光辐照电容线圈靶产生强磁场实验中,在约50 ps时,线圈电流达到20 kA以上。通过该实验结果与磁场产生理论模型对比,可得出该导线电阻值比常温直流电阻高出3个量级。对导线材料电阻率与趋肤效应的分析结果表明,该电阻值在量级上是合理的。获得超快脉冲强电流条件下的导线电阻值,有助于更深入理解线圈靶产生强磁场过程。     

快凝Pd82Si18合金原子团簇的演化特性及遗传机制

采用分子动力学(MD)模拟计算,对Pd82Si18合金快凝过程中基本原子团簇的遗传特性、演化趋势和结构稳定性进行了研究.团簇类型指数法(CTIM)分析表明:非晶固体中Si原子为中心的(102/14418/1551)双帽阿基米德反棱柱(BSAP)团簇数目占据优势.快凝过程中,BSAP结构团簇具有最大的遗传分数,并且其他以Si原子为中心的Kasper团簇大多都会向BSAP结构团簇转变.通过对Si原子为中心的Kasper基本团簇电子性质第一性原理计算发现,体系中BSAP团簇的结合能最低,结构稳定性较高,与分子动力学计算结果一致.     

铋化物发光玻璃中银表面等离激元对铒离子的发光增强作用

局域表面等离激元可以由自由空间的光直接激发,这也是局域表面等离激元的优点所在。研究铋化物发光玻璃中纳米银颗粒的表面等离激元对铒离子发光的增强效应、进一步的提高铋化物发光玻璃中铒离子的发光性能很有意义。首先,测量了(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃与(B)Er 3+(0.5%):铋化物发光玻璃样品的吸收谱,发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃在约600.0 nm处有一个较弱的宽的银表面等离激元共振吸收峰。同时发现两者都有典型的铒离子的吸收峰,它们的吸收几乎完全一样:在波峰形状、峰值强度和峰值波长等方面都很相近。测量了(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃和(B)Er 3+(0.5%):铋化物发光玻璃样品的激发谱,发现有位于379.0,406.0,451.0,488.0和520.5 nm的5个550.0 nm可见光的可见激发谱峰,和位于379.0,406.5,451.0,488.5,520.5,544.0,651.5和798.0 nm的8个1531.0 nm红外光的红外激发谱峰,容易指认出依次为Er 3+的4I 15/2→4G 11/2,4I 15/2→2H 9/2,4I 15/2→(4F 3/2,4F 5/2),4I 15/2→4F 7/2,4I 15/2→2H 11/2,4I 15/2→4S 3/2,4I 15/2→4F 9/2和4I 15/2→4I 9/2跃迁的吸收峰,通过测量发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃相对于(B)Er 3+(0.5%):铋化物发光玻璃样品的可见和红外激发谱的最大增强依次分别是238%和133%。最后,测量了它们的发光谱,发现有位于534.0,547.5和658.5 nm的三组可见发光峰,容易指认出依次为Er 3+的2H 11/2→4I 15/2,4S 3/2→4I 15/2,4F 9/2→4I 15/2荧光跃迁。还发现红外发光峰位于978.0和1531.0 nm,依次为Er 3+的4I 11/2→4I 15/2和4I 13/2→4I 15/2的荧光跃迁。通过测量发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃相对于(B)Er 3+(0.5%):铋化物发光玻璃样品的可见和红外发光谱的最大增强依次分别是215%和138%。对于银表面等离激元增强铒离子发光的机理,认为主要为纳米银颗粒的局域表面等离激元共振,造成金属纳米结构附近产生的局域电场的强度要远大于入射光的电场强度,从而导致了金属纳米结构对入射光产生强烈的吸收和散射,进而导致了荧光的增强;即局域表面等离子体共振局域场的场增强效应。     

Harmonically pump a femtosecond optical parametric oscillator to 1.13 GHz by a femtosecond 515 nm laser

We demonstrate a harmonically pumped femtosecond optical parametric oscillator(OPO)laser using a frequency-doubled mode-locked Yb:KGW laser at a repetition rate of 75.5 MHz as the pump laser.Based on a bismuth borate nonlinear crystal,repetition rates up to 1.13 GHz are realized,which is 15 times that of the pump laser.The signal wavelength is tunable from 700 nm to 887 nm.The maximum power of the signal is 207 m W at the central wavelength of 750 nm and the shortest pulse duration is 117 fs at 780 nm.The beam quality(M^2 factor)in the horizontal and vertical directions of the output beam are 1.077 and 1.141,respectively.     

不同材料弹体超声速侵彻钢筋混凝土靶的结构破坏对比实验

设计了超声速钻地结构弹,采用203 mm口径的火炮,开展了25 kg量级弹体在1100~1300 m/s速度范围内侵彻钢筋混凝土靶的实验研究,应用数值仿真对弹体侵彻钢筋混凝土靶的过程进行了模拟计算。基于实验和仿真结果,对超声速侵彻条件下两种金属材料弹体的结构响应、质量损失等问题进行了分析。结果表明:在超声速侵彻钢筋混凝土靶的过程中,两种金属材料的弹体结构变形破坏形式主要为头部侵蚀和侧壁磨蚀,头部侵蚀量的大小与弹体壳体材料有关,高强度G50钢材料更适合用于1200 m/s速度量级的超声速侵彻环境。对出现的“径缩”现象作了初步分析,并对今后工程应用的结构弹体设计提出了指导意见。     

光纤布拉格光栅传感器应变传递双向耦合分析

粘贴于受弯基体表面的光纤布拉格光栅传感器测量应变与基体真实应变之间存在误差,因此研究光纤布拉格光栅传感器的变形机理、分析测量应变与真实应变之间的关系是目前的研究热点.首先研究光纤布拉格光栅传感器与基体之间的相互作用机理,然后,利用有限元解、实验值和理论解进行对比验证,并分析产生误差的原因.最后,通过参数分析研究弹性模量、厚度、粘结长度等参数对光纤布拉格光栅传感器测量效果的影响.结果表明有限元解、实验值和理论解具有相同的变化趋势,有限元解与理论解的误差在2%以内,测量值与理论解的误差在7%以内.平均应变传递率随着基体弹性模量的增大、粘结长度的增长而逐渐增大,随粘结层弹性模量的减小、粘结层厚度的增大而逐渐减小.该理论对应用于受弯基体应变测量的光纤布拉格光栅传感器的设计具有一定的指导意义.