Giant magnetorefractive effect in La<Subscript>0.7</Subscript>Ca<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> films

Complex experimental investigations of the structural, optical, and magneto-optical properties (magnetotransmission, magnetoreflection, and transversal Kerr effect, as well as the magnetoresistance, of La_0.7Ca_0.3MnO₃ epitaxial films indicate that magnetoreflection and magnetotransmission in manganite films can reach giant values and depend strongly on the magnetic and charge homogeneity of the films, their thickness, and spectral range under investigation. It has been shown that the optical enhancement of the magnetorefractive effect occurs in thin films as compared to manganite crystals. In the region of the minimum of the reflectance near the first phonon band, the resonance-like magnetorefractive effect has been observed, which is accompanied by change of the sign of the magnetoreflection. A model based on the theory of the magnetorefractive effect has been proposed to qualitatively explain this behavior.     

常数红利下索赔到达时间间距为混合分布的罚金折现期望函数

在常数红利策略下考虑索赔时间间隔为指数分布与Erlang(2)分布混合时的风险模型,在此红利策略下,若保险公司的盈余在红利线以下时不支付红利,否则红利以等于保费率的常速率予以支付.对于此风险模型,推导并求解了罚金折现期望函数所满足的微积分方程,并在索赔量为指数分布时研究了其解的形式.     

输油管线的最优设计方案

以输油管线铺设费用最省为目标,通过建立非线性规划数学模型,得到了不同情形下管线铺设的最优设计方案.综合运用多元函数极值和三角函数相关知识得出了模型的精确解.     

Eavesdropping on the improved three-party quantum secret sharing protocol

Lin et al. [Song Lin, Fei Gao, Qiao-yan Wen, Fu-chen Zhu, Opt. Commun. 281 (2008) 4553] pointed out that the multiparty quantum secret sharing protocol [Zhan-jun Zhang, Gan Gao, Xin Wang, Lian-fang Han, Shou-hua Shi, Opt. Commun. 269 (2007) 418] is not secure and proposed an improved three-party quantum secret sharing protocol. In this paper, we study the security of the improved three-party quantum secret sharing protocol and find that it is still not secure. Finally, a further improved three-party quantum secret sharing protocol is proposed.     

Experimental demonstration of probabilistic quantum cloning

The method of quantum cloning is divided into two main categories: approximate and probabilistic quantum cloning. The former method is used to approximate an unknown quantum state deterministically, and the latter can be used to faithfully copy the state probabilistically. Thus far, many approximate cloning machines have been experimentally demonstrated, but probabilistic cloning remains an experimental challenge, as it requires more complicated networks and a higher level of precision control. In this work, we design an efficient quantum network with a limited amount of resources and perform the first experimental demonstration of probabilistic quantum cloning in a NMR quantum computer. In our experiment, the optimal cloning efficiency proposed by Duan and Guo [Phys. Rev. Lett. 80, 4999 (1998)] is achieved.     

Efficient surface plasmon amplification from gain-assisted gold nanorods

We report on the efficient surface plasmon amplification by stimulated emission of radiation (spaser) from a gold nanorod coated with proper gain media. Numerical simulations show that the threshold of the nanorod-based spaser is nearly 1 order of magnitude lower than that of the core-shell nanosphere, which is verified by analysis with electrostatic theory. Furthermore, it is found that the nanorod-based nanosystem possesses unique optical properties such as wavelength tunability and polarization sensitivity.     

Elongation rate measurements of nanofilms by microbump method induced by laser pulse

A laser pulse-induced microbump method that aims to measure the elongation rate of nanofilms is proposed. The sample structure is designed as “substrate/active layer/nanofilm” and the laser pulse is used as energy source to heat the active layer and to create microbump. These cause the nanofilm to expand and elongate. The surface area and length change of nanofilm is calculated by measuring the deflections and diameters of the microbumps, as well as to obtain the elongation rate of the nanofilms. A series of microbumps with different deflections are obtained. The deflections are measured precisely by atomic force microscopy (AFM) by taking AgO_x and ZnS-SiO₂ as the active layer and nanofilm, respectively, and by controlling pulse laser parameters. The line elongation rate and plane elongation rate of ZnS-SiO₂ nanofilm are measured at thickness of only 10 nm. Results show that both the two elongation rates linearly increases with laser power from 3.2 to 5.2 mW. Plane elongation rate is a little higher than the line elongation rate at the same laser power. The rupture at 5.4 mW laser power corresponds to fracture strength of the film. The maximum line elongation rate and plane elongation rate are 13.241% and 19.766%, respectively. This method applies a reproducible and efficient method for its applications in the near future.     

Hydroxyl Group Modifies Aggregation Behavior of a Non-ionic Hydro-fluorocarbon Hybrid Surfactant by Disrupting Interracial Water

Two non-ionic hydro-fluorocarbon hybrid surfactants with and without hydroxyl groups were synthesized and compared. They exhibited good thermal stability and superior surface activity. It was observed that the hydroxyl group had a profound effect on modifying the surface tension of their solutions and the morphology of the formed micelles. This effect may be attributed to the rearranging of the alkane group from above the air/aqueous surface to below it and the disrupting of the interfacial water structure induced by the hydroxyl groups. This work provides a strategy to weaken the immiscibility between hydrocarbon and fluorocarbon chains by modifying their orientational structure at the interface, thus it is helpful for the design of surfactants with varied interfacial properties.     

The Measurement of the Gibbs Energy of Transfer Between Oil and Water Using a Nano‐Carbon Paste Electrode

The use of nano‐carbon paste electrodes for the measurement of Gibbs energies of transfer between oil and aqueous phases is reported. In this method the oil of interest is used as the binder for the nano‐carbon paste electrodes and the molecule of interest is dissolved in the organic or aqueous phase. Voltammetry is performed over a period of time and used to monitor the transfer of the molecule between the two phases. The method is illustrated for the transfer of ferrocenemethanol between water and oil using the ferrocenemethanol / ferroceniummethanol (FcCH₂OH/FcCH₂OH⁺) redox couple. Three pairs of voltammetric peaks were observed in a 0.1 M KCl solution when the nano‐carbon paste electrode was modified by dissolution of FcCH₂OH in the binder oil: P1 [E=0.23 V, 0.17 V vs. Ag/AgCl (1 M KCl)], P2 [E=0.36 V, 0.32 V vs. Ag/AgCl (1 M KCl)] and P3 [E=0.55 V, 0.46 V vs. Ag/AgCl (1 M KCl)]. These are assigned to the FcCH₂OH species existing in the aqueous solution [FcCH₂OH(aq)/FcCH₂OH⁺(aq)], originating in the oil (o) [FcCH₂OH(o)/FcCH₂OH⁺(aq)] and to oxidation of adsorbed (ads) material on the nano‐carbon [FcCH₂OH(ads)] respectively. When supporting electrolyte containing the anions Cl^?, NO₃^? or SCN^? was used, an expulsion of the oxidised ferrocene occurred and the difference in midpoint potentials (E_mid) between the peaks P1 and P2 observed in these experiments allowed the calculation of the Gibbs energy (ΔG°) of transfer of ferrocenemethanol from water to oil. The average ΔG° value thus obtained was (?12.7±0.2) kJ mol^?1. For more hydrophobic anions (X^?=PF₆^?, AsF₆^?), the electron transfer is coupled to the transfer of the anion into the oil and the ΔG° for the transfer of the ion pair of FcCH₂OH⁺ and X^? ions from water to oil was found to be ?1.3 and ?3.9 kJ mol^?1 for PF₆^? and AsF₆^? respectively.     

Dipole‐Induced Band‐Gap Reduction in an Inorganic Cage

Metal‐doped polyoxotitanium cages are a developing class of inorganic compounds which can be regarded as nano‐ and sub‐nano sized molecular relatives of metal‐doped titania nanoparticles. These species can serve as models for the ways in which dopant metal ions can be incorporated into metal‐doped titania (TiO₂), a technologically important class of photocatalytic materials with broad applications in devices and pollution control. In this study a series of cobalt(II)‐containing cages in the size range ca. 0.7–1.3 nm have been synthesized and structurally characterized, allowing a coherent study of the factors affecting the band gaps in well‐defined metal‐doped model systems. Band structure calculations are consistent with experimental UV/Vis measurements of the Ti_xO_y absorption edges in these species and reveal that molecular dipole moment can have a profound effect on the band gap. The observation of a dipole‐induced band‐gap decrease mechanism provides a potentially general design strategy for the formation of low band‐gap inorganic cages.