Comparison of shear banding in BMGs due to thermal-softening and free volume creation

This paper reports a comparative study of shear banding in BMGs resulting from thermal softening and free volume creation. Firstly, the effects of thermal softening and free volume creation on shear instability are discussed. It is known that thermal softening governs thermal shear banding, hence it is essentially energy related. However, compound free volume creation is the key factor to the other instability, though void-induced softening seems to be the counterpart of thermal softening. So, the driving force for shear instability owing to free volume creation is very different from the thermally assisted one. In particular, long wave perturbations are always unstable owing to compound free volume creation. Therefore, the shear instability resulting from coupled compound free volume creation and thermal softening may start more like that due to free volume creation. Also, the compound free volume creation implies a specific and intrinsic characteristic growth time of shear instability. Finally, the mature shear band width is governed by the corresponding diffusions (thermal or void diffusion) within the band. As a rough guide, the dimensionless numbers: Thermal softening related number B, Deborah number (denoting the relation of instability growth rate owing to compound free volume and loading time) and Lewis number (denoting the competition of different diffusions) show us their relative importance of thermal softening and free volume creation in shear banding. All these results are of particular significance in understanding the mechanism of shear banding in bulk metallic glasses (BMGs). Supported by the Chinese Academy of Sciences under the project “Multi-Scale Complex System” (Grant No. KJCX-SW-L08), the National Natural Science Foundation of China (Grant Nos. 10725211 and 10721202), and the Doctorial Start-up Fund of Hunan University of Science and Technology (Grant No. E50840)     

Subwavelength-resolution direct writing using submicron-diameter fibers

<正>A novel direct writing technique using submicron-diameter fibers is presented.This technique adopts contact mode in the process of writing,and submicron lines with different widths have been obtained. Experimental results demonstrate that the resolution of this technique can be smaller than the exposure wavelength of 442 nm,and 380-nm-wide line is achieved.In addition,the distribution of light fields in the photoresist layer is analyzed by finite-difference time-domain method.     

First-principles prediction of crystal structure and physical properties of ScB3

The crystal structure of ScB₃ is seeked by combining the developed particle swarm optimisation algorithm for crystal structure prediction with first-principles calculations. A new monoclinic phase with the C2/m symmetry is predicted successfully, which is energetically more superior to the early reported R-3m-, P2₁/m-, P6₃/mmc-, P-6m2-, Pnma-, and Pm-3m-type structures in the pressure range from 0 to 100?GPa. The obtained elastic constants and phonon dispersion curve reveal that the C2/m-ScB₃ is mechanically and dynamically stable. The predicted large bulk module, high shear modulus, small Poisson’s ratio as well as the considerable hardness indicate that the C2/m-ScB₃ has outstanding mechanical property. Meanwhile, the dependences of the bulk modulus and Young’s modulus of ScB₃ on the crystal orientation are investigated theoretically. Through applying the strain–stress method, the ideal tensile and shear strengths along different crystal directions are also estimated, and the obtained results confirm that the shear mode dominates the failure mode in the C2/m-ScB₃ structure and it is intrinsically a hard material. The electronic structure calculation and chemical bonding analysis illustrate that the strong covalent B-B and Sc-B bonds are responsible for its structural stability and high hardness.     

活血逐瘀颗粒剂中芍药甙的含量测定

本文采用了薄层色谱法将复方制剂活血逐瘀颗粒中的芍药甙与其他成分分离，用紫外分光光度法测定芍药甙的含量，其平均回收率为９８．７４％，变异系数为１．４３％，本文方法抗干扰能力强，适合于中药复方制剂中芍药甙的定量分析。     

Infrared small moving target detection method based on graph matching

We apply graph matching method to detect infrared small moving targets using image sequences. Candidates （interest points） detected in the first frame form one graph and the same candidates in the last frame form another one. The real moving targets are extracted by matching these two graphs. Experimental results demonstrate that the proposed method is robust and efficient to the translation and rotation of the background.     

Effect of blue light radiation on curcumin-induced cell death of breast cancer cells

In the present study, we have successfully set up a novel blue light source with the power density of 9 mW/cm² and the wavelength of 435.8 nm and then the novel light source was used to investigate the effect of light radiation on curcumin-induced cell death. The cytotoxicity was investigated 24 h after the treatment of curcumin and blue light radiation together using MTT reduction assay. Nuclear chromatin was observed using a fluorescent microscopy with Hoechst33258 staining. The results showed blue light radiation could significantly enhance the cytotoxicity of curcumin on the MCF-7 cells and apoptosis induction. These findings demonstrated that blue light radiation could enhance curcumin-induced cell death of breast cancer cells, suggesting light radiation may be an efficient enhancer of curcumin in the management of breast cancer.     

Analysis of film strain and stress in a film-substrate cantilever system

The bending problem of a magnetic film-nonmagnetic substrate cantilever system is studied by using the principle of energy minimization. Emphasis is placed on the analysis of geometrical and physical parameter dependence of the neutral plane, internal film stress and strain of the cantilever system, and then the influence of such a parameter on the bending characteristic is presented. The results indicate, owing to the anisotropic expanding feature of the magnetostriction, that the neutral plane is generally anisotropic, and moves downwards rapidly with the increasing thickness ratio. Meanwhile, the bounding rigidity of substrate on the film will decrease with the increasing thickness ratio, and thus release the film stress, i.e., it decreases, but the film strain increases. The effect of Poisson’s ratio of the materials on the film strain, the stress and the neutral plane in the direction transverse to the magnetization is prominent. For the strain and the stress in the magnetization, however, the role of Poisson’s ratio is inconspicuous. This property is due to the initiative elongating (or contracting) feature of the magnetic film along its magnetization. Supported by the National Natural Science Foundation of China (Grant No. 10762001), the Key Project of the Chinese Ministry of Education (Grant No. 206024), and the Program for New Century Excellent Talents in University of China (Grant No. NCET-2005-0272)     

Q-switched Yb Doped Fiber Ring Laser with a M-Z Interferometer

An all-fiber Yb-doped Q-switched fiber ring laser system is reported. The laser system uses an all-fiber M-Z interferometer which plays both roles of Qswitch and tunable filter. Theoretical analysis and primary experimental results are given. A continuous tuning range 6fover 7 nm (from 1035 nm to 1042 nm) and a very stable pulse train with repetition rates exceeding 3 kHz and pulse width of 1.1μs were obtained. The laser system shows low cavity loss and is stable.