Synthesen neuer Phosphono-Analoga von Pantethein-derivaten

Syntheses of New Phosphono Analogues of Pantetheine Derivatives The phosphono analogues 5 and 13 of pantothenate 4′-(dibenzyl phosphate) and pantetheine 4′-(dibenzyl phosphate), respectively, are prepared as intermediates for the synthesis of a coenzyme-A phosphono analogue (Schemes 1 and 2). The synthesis of phosphono analogues 20 and 21 of oxapantetheine, which are structurally similar compounds to the phosphono analogue of pantetheine, is also described (Scheme 3).     

Recovery of thick shear bands in atactic polystyrene

The DSC thermograms of the shear band material cut out by a diamond saw to include some undeformed material revealed two T_g's clearly separated by about 10°C. The first T_g was at the same temperature as the T_g of the undeformed material. The second T_g, which was at a higher temperature than the first T_g, appeared shortly after the shear strain recovery during the heating of the shear band material in the DSC. When the shear strain in the shear band was partially reversed by mechanical means before taking the DSC thermogram, the ΔT between the two T_g's decreased and when the shear strain was mechanically reversed to almost zero, the second T_g disappeared. The stored energy of shear band material was found to be similar to that of the bulk compressed material for large strains. Dimensional recovery during heating of specimens with thick and fine bands was similar, both taking place above T_g.     

RE（Ⅲ）—ADP,RE（Ⅲ）—AMP配合物的合成及物性研究

首次合成了具有生物活性的系列配合物RE(Ⅲ)-ADP(稀土-腺苷二磷酸)和RE(Ⅲ)-AMP(稀土-腺苷-磷酸)(RE=Y,La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er,Tm,Yb,Lu),根据红外、紫外、荧光、X射线衍射、元素分析、络合滴定等分析结果,研究了[RE(Ⅲ)(ADP)(H_2O)_3]和[RE(Ⅲ)(AMP)_2(H_2O)_4]H两个系列配合物的化学组成和性质。     

Click chemistry to construct fluorescent oligonucleotides for DNA sequencing

"Click chemistry" 1,3-dipolar cycloaddition between alkynyl 6-carboxyfluorescein (FAM) and azido-labeled single-stranded (ss) DNA was carried out under aqueous conditions to produce FAM-labeled ssDNA in quantitative yield. The FAM-labeled ssDNA was successfully used as a primer to produce DNA sequencing products with single-base resolution in a capillary electrophoresis DNA sequencer with laser-induced fluorescence detection.     

钴-锌试剂络合吸附伏安法测定中草药中钴

研究了测定痕量钴的一种灵敏的吸附伏安法 ,利用钴和锌试剂络合物在悬汞电极上的吸附性 ,有效地提高了分析的灵敏度。在 0 .0 0 5mol·L-1NH3 和 0 .0 6mol·L-1NH4Cl及 2 .5× 1 0 -6mol·L-1锌试剂底液条件下 ,该体系 1 .5 ,2 .5阶微分吸附伏安法测定钴的线性范围为 1× 1 0 -10 ～ 1× 1 0 -7mol·L-1,用 2 .5阶微分吸附伏安法 ,富集 3min的检出限为 5× 1 0 -11mol·L-1。用此法直接测定了中草药中痕量钴     

A fibrous hypercrosslinked sorbent prepared on PP-ST-DVB matrix via post-crosslinking reaction

A fibrous sorbent possessing abundant micropore structure was firstly prepared via post-crosslinking reaction on the PP-ST-DVB original fiber. Its micromorphology and sorptive properties were investigated, and the results demonstrated that the novel fibrous hypererosslinked sorbent has narrow pore-size distribution, small average porous radius （1.90 nm）, high specific surface area （362.31 m^2/g）, and fine sorptive properties for small organic molecules.     

Migration of 99Tc in a Weak Loess Aquifer: A Field Column Experiment

The migration of ⁹⁹Tc in a weak loess aquifer was investigated in-situ with undisturbed aquifer medium columns. The columns were obtained horizontally at a depth of 3236 m in an Underground Research Facility (URF). Quartz containing ³H (HTO) and ⁹⁹Tc (in the form of ⁹⁹TcO₄ ^-) was introduced into one end of the columns and the columns were covered tightly. Aquifer water was introduced into the columns directly from an experimental shaft in the UFR. Effluents from the columns were collected and the activity of ³H and ⁹⁹Tc were determined with a liquid scintillation analyzer. The breakthrough curves of ³H and ⁹⁹Tc indicate that ⁹⁹Tc migrates a little faster than that ³H does in the aquifer.     

Simple synthesis of aminoquinoline/ethylaniline copolymer semiconducting nanoparticles

Pure copolymer nanoparticles from 8-aminoquinoline (AQ) and 2-ethylaniline (EA) were easily synthesized by a chemically oxidative polymerization in three different aqueous media. The potential and temperature of polymerization solution were used to successfully follow the polymerization progress. The molecular and morphological structures of the resulting AQ/EA copolymer particles were systematically characterized by IR, UV/Vis, NMR, gel permeation chromatography, laser particle-size analysis, atomic force and transmission electron microscopy. The oxidation potential of the monomers as well as the polymerization yield, structure, and properties of the particles were found to significantly depend on AQ/EA ratio, polymerization temperature and medium. It is surprisingly found that AQ homopolymerization and AQ/EA (50:50) copolymerization at 5 degrees C in HCl simply afford nano-ellipsoids with the major/minor axis diameters of 24/14 nm and 80/67 nm, respectively. A simple method of synthesizing semiconducting pure nanoparticles by introducing the AQ units with positively charged quaternary ammonium groups but in the absence of adscititious stabilizer or sulfonic substituent on the monomers is established first. Both the molecular weight and bulk electroconductivity of the copolymers exhibit a maximum at AQ content of 10 mol %. The solubility and film formability of the copolymers are good in highly polar solvents and reach the optimal at the AQ content of 20 and 10 mol %, respectively.     

Determining the wax content of crude oils by using differential scanning calorimetry

By the use of differential scanning calorimetry (DSC), a new method to measure the wax content of crude oil has been developed. In this paper, the wax content of a crude oil is proposed and proved to be the Q (total thermal effect of wax precipitation in sample) ratio of the crude oil and its corresponding wax obtained by using standard acetone method, i.e. Q_oil/Q_wax. For the 14 studied crude oils with the wax content ranging from 1 to 27 wt.%, the wax contents determined by the presented method are in good agreement with those determined by standard acetone method, with an absolute average deviation of only 0.82 wt.%. This method has an advantage over reported DSC methods in which the exact dissolution or precipitation enthalpy of wax is a must. It is also found that the wax contents determined by either of the two methods show good linear relationship with the total thermal effect Q_oil, with the correlation coefficients over 0.96. According to the empirical correlations, the wax content of a crude oil can be easily determined by using the DSC total thermal effect Q_oil. In addition and more significantly, the new method can be applied to improve the accuracy in determining the amount of precipitated wax in a waxy crude oil at different temperatures.