Three-dimensional photonic bandgap crystals of titania hollow spheres at visible wavelengths

A non-close-packed three-dimensional photonic crystal of titania hollow spheres has been fabricated. The fabricated process is based on the silica template technique, thermal sintering, and the sol–gel process. The band-structure calculations and optical measurements both indicate that a quasi-full three-dimensional photonic bandgap located at the visible wavelength has been presented between the eighth and ninth bands. This indicates that the non-close-packed structure of titania hollow spheres was easier to open the complete photonic bandgaps than other face-centered cubic structures made by self-assembling methods at the visible region.     

Coupling-induced excitation of a forbidden surface plasmon mode of a gold nanorod

Using the finite-difference time-domain (FDTD) method, we simulate the coupling between a gold nanorod and gold nanoparticles with different plasmonic resonant frequencies/volumes as well as that between the nanorod and a dielectric nanosphere. The influences of coupling with different nanoparticles on the excitation of a forbidden longitudinal surface plasmon mode of the nanorod under normal incidence are investigated. It is found that the cause of this excitation is the broken symmetry of the local electric field experienced by the nanorod resulting from the charge pileup on the other nanoparticle. This result is valuable for understanding the near-field optical characterization of plasmonic metal nanoparticles. Supported by the National Natural Science Foundation of China (Grant Nos. 10821062 and 10804004), the National Basic Research Program of China (Grant No. 2007CB307001), and the Specialized Research Fund for the Doctoral Program of Higher Education (Grant No. 200800011023) Contributed by GONG QiHuang     

Up-conversion emissions of Er<Superscript>3+</Superscript>-Yb<Superscript>3+</Superscript> codoped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles by the arc discharge synthesis method

The Er³⁺-Yb³⁺ codoped Al₂O₃ nanoparticles with an average particle size of about 50 nm have been synthesized by an arc discharge synthesis method. The green and red up-conversion emissions centered at about 526, 547 and 677 nm, corresponding respectively to the ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978-nm semiconductor laser diode excitation. The Annealing has evident effect on the up-conversion emissions of the samples: The red up-conversion emission is noticeable before annealing; however, the green up-conversion emission becomes predominant after annealing. The mixture of (Er,Yb)₃Al₅O₁₂ and α-(Al,Er,Yb)₂O₃ phases is more favorable for green up-conversion emissions due to an enhancement of the ESA (I) of ⁴I_11/2+a photon→⁴F_7/2 and ET (III) of ²F_5/2(Yb³⁺)+⁴I_11/2(Er³⁺)→²F_7/2(Yb³⁺)+⁴F_7/2(Er³⁺) processes. The two-photon absorption up-conversion process is involved in the green and red up-conversion emissions. The results have proved that arc discharge synthesis is a new promising preparation technology for optical materials. Supported by National Natural Science Foundation of China (Grant No. 10804015), the Scientific Research Foundation for Doctor of Liaoning Province (Grant No. 20071095), and the Educational Committee Foundation of Liaoning Province (Grant No. 2008123)     

高温超导电机电枢线圈临界电流密度研究

高温超导线材的临界电流密度受磁场的影响,在设计计算时,通常假设在线圈截面上电流密度是均匀分布的。但是,实际上在线圈截面上,电压是一致的。由于线圈中的磁场不均匀分布,各处的临界电流密度是不同的。采用数值模拟的方法,分析了高温超导线圈截面上的临界电流分布。结果显示,临界电流密度的分布是不均匀的,总的临界电流可比按均匀分布时的计算结果提高25%以上。     

Magnetoexciton in semiconductor concentric double rings

We investigate theoretically the magnetoexciton states in semiconductor concentric quantum double rings using the multi-band effective mass theory. We find that a perpendicular magnetic field can lead to oscillations in the exciton energy which appear as kinks in the magneto-photoluminescence (PL) spectra as the magnetic field increases. The spatial distribution of the exciton over the rings depends sensitively on the thicknesses of the inner and outer rings. The tunneling coupling between the inner and outer rings and the heavy-hole and light-hole mixing results in different anticrossing behaviors. Exciton can be converted into a spatially separated type-II exciton by tuning the thickness, the inner and/or outer ring radius and the magnetic field. We show that this type I–type II transition is reflected in the oscillator strength of the PL spectrum which will be the experimental signature that will provide us with information about the spatial distribution of the exciton.     

有机半导体的物理掺杂理论

基于最低未被占据分子轨道（LUMO）和最高被占据分子轨道（HOMO）的高斯态密度分布与载流子在允许量子态中的费米-狄拉克（Fermi-Dirac）分布,提出有机半导体中物理掺杂的理论模型;研究了掺杂浓度、温度和禁带宽度对载流子浓度的影响,并与一些报道的实验结果做了比较.研究发现无论是否掺杂,温度升高时,有机半导体中的载流子浓度都会增大,并且随温度倒数的线性减小而指数增大;对于本征有机半导体,载流子浓度随禁带宽度的增大而指数下降,随高斯分布宽度的平方指数增加;对杂质和主体不同能级关系的掺杂情形下掺杂浓度对载 关键词： 有机半导体 掺杂 高斯态密度 载流子浓度     

First-principles study of structrural and corrected band properties of wurtzite Zn1-xCdxO and Zn1-xMgxO systems

A first-principles method based on density functional theory(DFT),a generalized gradient approximation(GGA),and a projector-augmented wave(PAW) are used to study the structual and band properties of wurtzite Zn1-xCdxO and Zn1-xMgxO(0 ≤x≤1) ternary alloys.By taking into account all of the possible structures,the band gaps of Zn1-xCdxO and Zn1-xMgxO alloys are corrected and compared with experimental data.     

An efficient deterministic secure quantum communication scheme based on cluster states and identity authentication

A novel efficient deterministic secure quantum communication scheme based on four-qubit cluster states and single-photon identity authentication is proposed. In this scheme, the two authenticated users can transmit two bits of classical information per cluster state, and its efficiency of the quantum communication is 1/3, which is approximately 1.67 times that of the previous protocol presented by Wang et al [Chin. Phys. Lett. 23 (2006) 2658]. Security analysis shows the present scheme is secure against intercept-resend attack and the impersonator's attack. Furthermore, it is more economic with present-day techniques and easily processed by a one-way quantum computer.     

Vacuum Outer-Gap Structure in Pulsar Outer Magnetospheres

We study the vacuum outer-gap structure in the outer magnetosphere of rotation-powered pulsars by considering the limit of trans-field height through a pair production process. In this case, the trans-field height is limited by the photon-photon pair production process and the outer boundary of the outer gap can be extended outside the light cylinder. By solving self-consistently the Poisson equation for electrical potential and the Boltzmann equations of electrons/positrons and γ-rays in a vacuum outer gap for the parameters of Vela pulsar, we obtain an approximate geometry of the outer gap, i.e. the trans-field height is limited by the pair-production process and increases with the radial distance to the star and the width of the outer gap starts at the inner boundary （near the null charge surface） and ends at the outer boundary which locates inside or outside the light cylinder depending on the inclination angle.     

La-Ce-TiO2纳米光催化剂的溶胶-微波法合成、谱学表征及其活性研究

以钛酸四丁酯为原料,采用溶胶-微波法(Sol-Microwave Method)合成了镧和铈共掺型纳米TiO2粉体(La-Ce-TiO2),借助XRD、XPS和UV-Vis等测试手段对其进行了表征,并以甲基橙为模型污染物考察了掺杂量对样品光催化活性的影响规律.XRD分析表明,所得粉体均为锐钛矿相纳米TiO2,且稀土元素镧和铈掺杂后纳米TiO2特征衍射峰宽化,强度降低;XPS分析表明,镧和铈掺杂后样品表面存在大量的氧缺位;UV-Vis吸收光谱表明,所得粉体在400 nm以下均有连续宽化的吸收带,且La和Ce掺杂后样品对光的吸收显著增强,这足由于La(Ⅲ)-O荷移跃迁以及Ce(Ⅳ)f→d跃迁和Ce(Ⅳ)-O荷移跃迁所致;光催化实验表明,La和Ce共掺杂能显著提高纳米TiO2的光催化活性,其中当La(Ⅲ)和Ce(Ⅳ)掺杂量分别为2%和0.04%时,纳米TiO2光催化剂具有较高的催化活性,自然光照射下光催化氧化处理卷烟厂蒸叶车间废水,效果较好,废水COD去除率达到86.11%.