硝酸铽与1，1，1′，1′-四(吡啶-2-羧酸酯基)联三甲基丙烷配合物的合成、表征及荧光性质

Solid complex of terbium nitrate with a novel tetrapodal ligand, 1,1,1′,1′-tetra(2-pyridinecarboxylester)-di(trimethylpropane) was prepared. This new complex with the formula of [TbL(NO₃)](NO₃)₂·2H₂O was charact-erized by elemental analysis, molar conductivity, IR spectroscopy and thermal analysis. At the same time, the luminescent property of the complex was also studied.     

Interface characteristics in diffusion bonding of Fe3Al with Cr18-Ni8 stainless steel

Fe3Al and Cr18-Ni8 stainless steel were diffusion-bonded in vacuum and a Fe3Al/Cr18-Ni8 interface with reaction layer was formed. Microstructure in the reaction layer at Fe3Al/Cr18-Ni8 interface was analyzed by means of scanning electron microscope (SEM) and electron probe micro-analyzer (EPMA). The growth of reaction layer with heating temperature (T) and holding time (t) was researched. The results indicate that FeAl, Fe3Al, Ni3Al, and alpha-Fe (Al) solid solution are formed in the reaction layer. These phases are favorable to promote the element diffusion and to accelerate the formation of the reaction layer at Fe3Al/Cr18-Ni8 interface. The growth of reaction layer obeys the parabolic law and its thickness (X) is expressed by X2 = 7.5 x 10(-4)exp(-83.59/RT)(t - t0).     

Baker''''s yeast mediated reduction of substituted acenaphthenequinones: Regio-and enantioselective preparation of mono-hydroxyacenaphthenones

Baker's yeast mediated reduction of acenaphthenequinone within 4-10 h afforded mono-hydroxyacenaphthenone mainly with low enantioselectivity, the substrate and mono-hydroxyacenaphthenone product almost converted to dihydroxyacenaphthene after 48 h. By control of the reaction time and in the presence of DMF as co-solvent, the reduction of 6-substituted acenaphthenequinones under vigorous agitation afforded the corresponding 2-hydroxyacenaphthenones in 24-84% yields with 10-93% ee.     

Thermal characterization and thermal degradation of poly(norbornene-2,3-dicarboxylic acid dialkyl esters) synthesized by vinyl addition polymerization

The thermal properties and degradation behaviors of poly(norbornene-2,3-dicarboxylic acid dialkyl esters) (PNB-dialkyl esters) (alkyl = Me (PNB-Me), Et (PNB-Et), Pr (PNB-Pr), and Bu (PNB-Bu)) were investigated by thermogravimetric analysis (TGA) in dynamic conditions and by infrared (IR) spectroscopy. The PNB-dialkyl esters show good thermal stability up to 350 °C, and the thermal stability decreases in the order Me > Et > Pr > Bu with the increase in size of side chain. The effect of side-chain size on the thermal degradation behaviors of PNB-dialkyl esters is evidenced by one-step thermal degradation profile for PNB-Me while two-step thermal degradation profile for PNB-Et, PNB-Pr, and PNB-Bu. Transformation is deduced to undergo β-hydrogen elimination and formation of anhydride group in the first stage of thermal degradation reaction according to TGA and IR results for PNB-Et, PNB-Pr, and PNB-Bu. The apparent activation energy and thermal degradation model of PNB-dialkyl esters are estimated by means of Ozawa-Flynn-wall method and Phadnis-Deshpande method, respectively.     

Dexmedetomidine promotes the progression of hepatocellular carcinoma through hepatic stellate cell activation

Dexmedetomidine (DEX) is an anesthetic that is widely used in the clinic, and it has been reported to exhibit paradoxical effects in the progression of multiple solid tumors. In this study, we sought to explore the mechanism by which DEX regulates hepatocellular carcinoma (HCC) progression underlying liver fibrosis. We determined the effects of DEX on tumor progression in an orthotopic HCC mouse model of fibrotic liver. A coculture system and a subcutaneous xenograft model involving coimplantation of mouse hepatoma cells (H22) and primary activated hepatic stellate cells (aHSCs) were used to study the effects of DEX on HCC progression. We found that in the preclinical mouse model of liver fibrosis, DEX treatment significantly shortened median survival time and promoted tumor growth, intrahepatic metastasis and pulmonary metastasis. The DEX receptor (ADRA2A) was mainly expressed in aHSCs but was barely detected in HCC cells. DEX dramatically reinforced HCC malignant behaviors in the presence of aHSCs in both the coculture system and the coimplantation mouse model, but DEX alone exerted no significant effects on the malignancy of HCC. Mechanistically, DEX induced IL-6 secretion from aHSCs and promoted HCC progression via STAT3 activation. Our findings provide evidence that the clinical application of DEX may cause undesirable side effects in HCC patients with liver fibrosis.Subject terms: Cancer microenvironment, Cell growth     

Self-assembly, optical behavior, and permeability of a novel capsule based on an azo dye and polyelectrolytes

A novel capsule composed of an azo dye, Congo red (CR), and different polymers, including poly(styrenesulfonate, sodium salt) (PSS), poly(allylamine hydrochloride) (PAH), and poly(diallyldimethylammonium chloride) (PDDA), have been successfully fabricated by the layer-by-layer self-assembly technique. The stepwise linear deposition process was monitored by means of UV-visible absorption measurements. The formation of hollow capsules was verified by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). The resulting hollow PSS/PAH/CR/PDDA capsules displayed a sensitive response to visible light. Optical changes of the hollow capsules prior to and after the photoreaction were investigated in detail by means of UV-visible spectroscopy, CLSM, and SFM. It was found that the photochemical reaction of the assembled hollow capsules depends strongly on the matrix. Qualitative results on the permeability of the hollow capsule walls with CR as one component indicate that the permeability of the walls can be easily photo-controlled at varying irradiation time intervals without addition of external chemicals.     

Improvement of the dissolution rate of silymarin by means of solid dispersions

Solid dispersions of silymarin were prepared by the fusion method with the intention of improving the dissolution properties of silymarin. Polyethylene glycol 6000 (PEG 6000) was used as the inert hydrophilic matrix. The dissolution studies of the solid dispersions were performed in vitro. And the results obtained showed that the dissolution rate of silymarin was considerably improved when formulated in solid dispersions with PEG 6000 as compared to original drug, and the increased dissolution rate might be favorable for further oral absorption.     

Methanol transport in PMMA: The effect of mechanical deformation

The effect of cold work on the transport of liquid methanol in crosslinked PMMA disks has been determined at temperatures from 35–56°C. Deformed samples absorb at fast rates with kinetics that approach those of Fickian diffusion. Undeformed samples sorb at lower rates and the kinetics tend toward those of Case II transport. Shape recovery accompanied swelling in deformed samples. Samples saturated with methanol were desorbed in cyclohexanol. Resorption of desorbed samples showed fast rates for both deformed and undeformed samples and matched those of the absorption cycle in deformed samples. An analogy is made between the microstructure due to cold work and due to swelling.     

2,4,6—三氧—1,3,5,2—三氮磷杂环己烷衍生物的合成及其抗肿瘤活性

利用Ｎ，Ｎ－二（２－氯乙基）氨基磷酰二异氰酸酯和胺的加成反应，合成了２，４，６三氧－１，３，５，２三氮磷杂环己烷衍生物，它们的结构经＾１ＨＮＭＲ，ＩＲ和元素分析所证实。初步生物活性测试结果表明，部分化合物具有一定的抗肿瘤活性。     

Mixed micellar medium for the spectrophotometric determination of molybdenum in molybdenum/tungsten mixtures

Effects of cetyltrimethylammonium bromide (CTAB) and/or nonylphenoxypolyethoxyethanol (OP) on the absorption spectra of the complexes of molybdenum and tungsten with bromopyrogallol red (BPR) were studied. Based on these effects, a mixture of CTAB and OP was thus selected as a medium for the selective and sensitive determination of Mo in Mo/W binary mixtures. Under the optimum conditions, Beer's law was obeyed over the range 0.06-0.8 mug ml(-1) Mo with molar absorptivity being 1.3x10(5) l mol(-1) cm(-1) and detection limit 0.025 mug ml(-1). For 1.0 mug Mo, at least 20 mug W did not interfere in the determination of Mo with average recovery and relative standard deviation being 99.5% and <2%, respectively. The method developed maintained the features of simplicity and rapidity and, moreover, its selectivity and sensitivity enhanced greatly due to the use of CTAB/OP mixed micellar medium. When coupled with a compatible concentration method, the proposed method could be used for the determination of trace Mo in natural waters.