改善液晶光阀投影光学系统偏振特性的理论设计方法

定量分析了液晶光阀投影光学系统中影响系统对比度的主要因素，利用矢量方法建立三维空间数学模型对光线进行追迹，并利用琼斯矩阵和矢量光学的原理分析了偏振器件--主要是波片--和各种光学薄膜对光学系统性能的影响。给出了在一定假设条件下的对没有波片的光学系统和插入波征后的光学系统的仿真计算结果。两组数据比较表明在光路中插入合适相位差的波片可以显著提高系统对比度等性能。     

The Tolerance of All-Optical Switching Based on Cascaded Second-Order Nonlinearity in PPLN APE Waveguide

Based on solving the couple mode equation numerically, the characterization of the signal power on the gate power was analyzed. And the relationship of the tolerance of the grating period and the bulk temperature on the interaction length was analyzed.     

Consolidation around a borehole embedded in media with double porosity under release of geostatic stresses

The paper deals with the stress, displacement, pore and fissure pressures fields induced by the drilling and/or the pressurization of a vertical borehole in a formation of water-saturated porous media with double porosity. The solution includes the boundary condition of non-hydrostatic in situ state of stress. The solid skeleton is assumed to behave as a linearly poroelastic material with compressible constituents. The analytical solution is derived in Laplace’s space and transformed to the time domain using a numerical inversion technique. The histories of pore and fissure pressures are illustrated to show the influence of permeabilities of the pore and fissure systems.     

Determination of carbamazepine by chemiluminescence detection using chemically prepared tris(2,2'-bipyridine)ruthenium(III) as oxidant.

A new chemiluminescence method for the determination of carbamazepine (CBZ) has been developed. The method is based on the chemiluminescence produced in the reaction of tris(2,2'-bipyridine)ruthenium(III) and CBZ in an acidic medium. The chemiluminescence intensity was enhanced by organic solvents in the reaction system. Under the optimum experimental conditions, the calibration curve was linear over the range 4.0 x 10(-3)-8.6 x 10(-7) mol/L for CBZ. The detection limit (S/N = 3) was 2.5 x 10(-7) mol/L and the relative standard deviation of six replicate measurements was 2.6% for 4.0 x 10(-4) mol/L of CBZ. The possible reaction mechanism were also discussed. The chemiluminescence method was successfully applied to assay the CBZ contents in pharmaceutical tablets.     

The effect of Mn substitution on thermoelectric properties of Ca3MnxCo4−xO9 at low temperatures

The effects of partial substitution of Mn for Co on the thermoelectric properties of Ca₃Mn_xCo_4−xO₉ (x=0, 0.03, 0.9), prepared by sol-gel process, were investigated at the temperatures from 380 K down to 5 K. The results indicate that the substitution of Mn for Co results in increase in thermopower at temperatures >∼80 K, and substantial (23-31% at 300 K) decrease in lattice thermal conductivity in the whole temperature range investigated. The temperature behavior of ZT suggests that Ca₃Mn_xCo_4−xO₉ with light Mn substitution would be a promising candidate for high-temperature thermoelectric applications.     

Decay distribution of spontaneous emission from atoms in one-dimensional photonic crystal

Spontaneous emission behavior from atoms (or molecules) in one-dimensional photonic crystal with a defect is investigated. Taken all the TE and TM modes into account, the normalized spontaneous emission rate of the atom is calculated as a function of the position of the atom in the crystal. Results for both nonabsorbing dielectric structure and absorbing dielectric structure are presented. With the increase of the thickness of the defect in which the atoms are embedded, the oscillations of the spontaneous emission rate versus the position of the atom become dense and the lifetime distribution becomes narrow and sharp. The PC effect may lead to the coexistence of both accelerated and inhibited decay processes.     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.     

Interface Optical Phonon Modes and Frohlich Electron-Phonon Interaction Hamiltonian in a Multi-shell Spherical Nanoheterosystem

Under dielectric continuum approximation, interface optical (IO) phonon modes and the Frohlich electron-IO phonon interaction Hamiltonian in a multi-shell spherical nanoheterosystem were derived and studied. Numericalcalculations on three-layer and four-layer CdS/HgS spherical nanoheterosystems have been performed. Results revealthat there are four IO phonon modes for the three-layer system and six IO phonon modes for the four-layer system.On each interface, there are two IO phonon modes, the frequency of one is between WTO,CdS and WLO,CdS, and that ofthe other is between WTO,HgS and WLO,HgS. With the increasing of quantum number l, the frequency of each IO modeapproaches one of the two frequency values of the single CdS/HgS heterostructure, and the potential for each IO modeis more and more localized at a certain interface, furthermore, the coupling between the electron-lO phonons becomes weaker.     

溃坝问题的间断有限元方法

本文研究90年代初提出的Runge-Kutta间断Galerkin有限元方法，给出该方法的精度分析，通过经典算例验证该方法处理间断问题、捕捉锐利波形的能力，并将其推广到求解浅水问题．针对坝底无摩擦，无坡度的理想情形进行讨论，给出方溃坝和圆溃坝问题的数值模拟结果．     

The Novel Y-Branch With Two Reflectors

A novel Y-branch waveguide with two reflectors is proposed. The normalized transmitted power for the branching angle of 50°is greater than 70%, which is higher than conventional Y-branch with such wide angle.