Activity of TiO2 deposited by the CVD method on ammoxidized surface of a carbonaceous material in hydrogenation of styrene

Hydrogenation of styrene has been applied as a test reaction to study the catalytic activity of TiO₂ deposited by the CVD (chemical vapour deposition) method on the surface of a carbonaceous material enriched in nitrogen (C_N).     

Mechanical properties of metallic ribbons investigated by depth sensing indentation technique

The paper presents mechanical properties of two kinds of Co-based and one Fe-based metallic ribbons by the depth sensing indentation (DSI) technique. Investigations were carried out on two kinds ternary alloy Co₇₇Si_11,5B_11,5 and Fe₇₈Si₁₃B₉ and multicomponent Co₆₈Fe₄Mo₁Si_13,5B_13,5, which are so-called “zero-magnetostriction” materials. Metallic ribbons were investigated in amorphous state and partially crystallized state after annealing in 400°C in argon atmosphere. Heating of ribbons obtained by melt spinning technique was performed to check its effect on changes of mechanical properties.     

Mössbauer effect studies of electrochemically hydrogenated austenitic steels

Electrochemically hydrogenated ASTM 310 and ASTM 316 austenitic steels were investigated by means of⁵⁷Fe Mössbauer spectroscopy. Starting with non-hydrogenated materials, freshly hydrogenated ones and one-day room temperature aged hydrogenated samples were studied. The resultant spectra were analysed with a modified Hesse-Rübartsch method [1] adopted to the case of isomer shift distribution.     

The dynamics of multidimensional cosmological models in the presence of quantum effects. I. The case FRW ×T D at high temperatures

The dynamical system approach is applied to the study of dynamics of multidimensional cosmological models with topology FRW ×T ^D (D-dimensional torus) in the presence of high-temperature quantum effects. The stability methods developed in the paper of Szydowski (Gen. Rel. Grav.,20, 221, 1988) are used in the analysis of typical states of the metric in the neighborhood of singularities and for large time values. The problems of dynamical dimensional reduction, structure of singularities, isotropization, etc., are discussed in this context.     

Evaluation of a purge-and-trap injection system for capillary gas chromatography-microwave induced plasma-atomic emission spectrometry for the determination of volatile selenium compounds in water

A method is presented for the selective determination of the volatile selenium species dimethylselenide and dimethyldiselenide, using a commercially available purge-and-trap injection system coupled to capillary gas chromatography-microwave induced plasma-atomic emission spectrometry. The efficiency of the purging step was evaluated and the parameters affecting the purge and trap processes were optimized. The method was applied to the determination of volatile selenium compounds in lake water. Relative detection limits of 2ng/l for dimethylselenide and dimethyldiselenide, corresponding to an absolute detection limit of 10 pg, were achieved.     

Complexing properties of methyl and phenyl glycine derivatives in their compounds with H+, Ni(II), Cu(II), and Zn(II)

The influence of the solvent and the substituents on the complexing properties of methyl and phenyl glycine derivatives is discussed. On the basis of a computer analysis of potentiometric titration results, the composition and the stability constants of the complexes ofN-methylglycine,N,N-dimethylglycine,N-phenylglycine and phenylglycine with H⁺ and with Ni(II), Cu(II), Zn(II) were determined. The ligand-metal coordination mode as well as the zwitterion level in percent in ligand/proton systems were determined by spectral analyses and equilibria studies.

---

Komplexbildung der Methyl- und Phenylglycin-Derivate in ihren Verbindungen mit dem Proton und Ni(II), Cu(II) und Zn(II)

Zusammenfassung Der Einfluß des Lösungsmittels und der Substituenten auf die komplexbildenden Eigenschaften der Methyl- und Phenylglycin-Derivate wird diskutiert. Anhand einer Computer-Analyse von potentiometrischen Daten wurden die Zusammensetzung und die Beständigkeitskonstanten der Komplexe vonN-Methylglycin,N,N-Dimethylglycin,N-Phenylglycin und Phenylglycin mit H⁺, Ni(II), Cu(II) und Zn(II) festgestellt. Mittels spektroskopischer Methoden und Gleichgewichtstudien wurde der Koordinationstyp des Liganden mit dem Metall festgestellt sowie der Prozentanteil des Zwitterions im Ligand/Proton-System.

     

New evidence on the structure of potassium salts of 12-tungstophosphoric acid, KxH3-xPW12O40

Physicochemical properties and compositions of KxH(3-x)PW12O40 salts, where 2 < or = x < or = 3, have been investigated. It has been found that freshly prepared K2HPW12O40 salt (drying at 313 K) contains particles of heteropolyacid and particles of the neutral potassium salt, the sample being in 78.6% amorphous. On aging at room temperature, the heteropolyacid spreads to form a surface layer covering the neutral potassium salt particles K3PW12O40. Heat treatment of KxH(3-x)PW12O40 salts, where 2 < or = x < 3, from 313 K to higher temperatures induces the transformation of the heteropolyacid-covering K(3) core into a well-dispersed, amorphous surface layer. On further heating of the acidic potassium salts, the surface layer decomposes between 855 and 915 K with the formation of a PW8O26-type bronze as a new phase, the K3PW12O40 salt remaining unchanged. The latter starts to decompose at 1093 K, and in the case of all samples, the process is completed at about 1183 K. Rietveld structure refinement, XPS, and 31P NMR measurements of acidic potassium salts indicate that the core of these salts is always formed by the K3PW12O40 salt, which is covered by a heteropolyacid. Comparison of lattice parameters of the K3 salt and HPW leads to the conclusion that the layer is composed of partially or completely dehydrated heteropolyacid molecules. The coverage of the core by HPW in the K2 sample was estimated to be equal to one monolayer.     

The synthesis of 1-alkyl-4a-(4-chlorophenyl)- 4,4a-dihydropyrimido[6,1-a]isoindol-9(3H)-one

The primary amino group of 3-(2-aminoethyl)-3-(4-chlorophenyl)-2,3-dihydro-1H-isoindol-1-one ( 1 ) was acylated with acetyl chloride, benzoyl chloride and phenyl acetyl chloride to form the amides 2a -c, respectively. These were cyclized in phosphorus oxychloride to give the 1-substituted-4a-(4-chlorophenyl)-4,4a-dihydropyrimido [6,1-a]isoindol-9(3H)-ones 3a-c . Heating of 1 in formic acid lead to the formation of 4a-(4-chlorophenyl)-4,4a-dihydropyrimido[6,1-a]isoindol-9(3H) -one (3d) . Heating of 1 in the presence of phosgene lead to the formation of 4a-(4-chlorophenyl)-2,3,4,4a-tetrahydropyrimido[6,1-a]isoindole-1, 9-dione (4).     

Preparation of unsymmetrical disulfides by using sulfines1

Acidolytic cleavage of unsymmetrically substituted dithioacetal monoxides, ArCH(SR)S(O)Me has been used to prepare linear unsymmetrical disulfides RSSMe. Disproportionation was suppressed by the addition of a small amount of benzyl mercaptan. The required starting materials were conveniently obtained from appropriately substituted sulfines ArC(=SO)SR and methyl lithium. The following disulfides were prepared: R =n-C₄H₉ (73.5%), n-C₇H₁₅ (78%), Ph (77.3%), AcO(CH₂)₁₀ (81.5%).The unsymmetrical dithioacetal PhCH(SEt)SC₇H₁₅-n gave upon oxidation with one equivalent of peracid a mixture of two dithioacetal monoxides which on treatment with HClO₄ led to three disulfides. This result is discussed in term of the mechanism of acidolysis.     

Thermal properties of flame retardant viscose fibers

This paper discusses the problem of the thermal properties of flame retarding additives based on phosphazene derivatives and of the commercial agents TomflamB, FlammexT23P and StockhausenW-20949, as well as of flame resistant viscose fibers containing the above agents. Results of this investigation showed the action of FlammexT23P, StockhausenW-20949 and phosphazene derivatives at lower temperature. TomflamB acted within a much wider range of temperatures. The flame retardant additives applied to viscose fibers change the thermal properties of the fiber material.