Colloidal adhesion of phospholipid vesicles: high-resolution reflection interference contrast microscopy and theory

High-resolution reflection interference contrast microscopy (HR-RICM) was developed for probing the deformation and adhesion of phospholipid vesicles induced by colloidal forces on solid surfaces. The new technique raised the upper limit of the measured membrane–substrate separation from 1 to 4.5 μm and improved the spatial resolution of the heterogeneous contact zones. It was applied to elucidate the effects of wall thickness, pH and osmotic stress on the non-specific adhesion of giant unilamellar vesicles (ULV) and multilamellar vesicles (MLV) on fused silica substrates. By simultaneous cross-polarization light microscopy and HR-RICM measurements, it was observed that ULV with the wall thickness of a single bilayer would be significantly deformed in its equilibrium state on the substrate as the dimension of its adhesive–cohesive zone was 29% higher than the theoretical value of a rigid sphere with the same diameter. Besides, electrostatic interaction was shown as a significant driving force for vesicle adhesions since the reduction in pH significantly increased the degree of deformation of adhering ULV and heterogeneity of the adhesion discs. The degree of MLV deformation on the solid surfaces was significantly less than that of ULV. When the wall thickness of vesicle increased, the dimension of contact zone was reduced dramatically due to the increase of membrane bending modulus. Most important, the adhesion strength of colloidal adhesion approached that of specific adhesion. Finally, the increase of osmotic stress led to the collapse of adhering vesicles on the non-deformable substrate and raised the area of adhesive contact zone. To interpret these results better, the equilibrium deformation of adhering vesicle was modeled as a truncated sphere and the adhesion energy was calculated with a new theory.     

Biodegradable elastomer for soft tissue engineering

In this work we present the synthesis of a biodegradable, elastomeric material with a wide range of mechanical properties. The synthesis of the material was done by condensation polymerization of malic acid and 1,12–dodecandiol. The synthesized materials have low Young’s modulus ranging from about 1 to 4 MPa and a high elongation at break of 25–737% depending on the crosslinking density of the system. The cell growth observed under microscope showed good proliferation at 3 days of culture indicating good biocompatibility and support of L929 cells growth. The fabrication of 3D scaffold from these materials using the super critical CO₂ foaming method was also attempted. This method of scaffold fabrication is appropriate for materials that are easily hydrolysable and it also has the advantage of being a solvent free process. These materials are generally soft, biocompatible and biodegradable making them suitable for tissue engineering of soft tissues that are elastic in nature like muscles and blood vessels.     

An improved method for the analysis of major antioxidants of Hibiscus esculentus Linn

Major antioxidants of aqueous ethanol extract from Lady's Finger (Hibiscus esculentus Linn) were systematically investigated in this study. Firstly, high-performance liquid chromatography (HPLC) was applied to identify antioxidant peaks in a sample by spiking the sample extract with 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) free radical, which was prepared from manganese dioxide and ABTS. Secondly, in order to identify the elution period of major antioxidant peaks, the antioxidant capacities of different fractions from solid-phase extraction (SPE) were measured, and the chromatograms of fractions were also recorded. Lastly, multiple mass spectrometry (MS(n)) was used to elucidate the possible chemical structures of antioxidants, and nuclear magnetic resonance (NMR) was further applied for structure confirmation. The major antioxidant compounds in lady's finger were identified to be quercetin derivatives and (-)-epigallocatechin using HPLC-MS and HPLC-MS(n) (n = 2-4) techniques. It was found that about 70% of total antioxidant activity was contributed by four quercetin derivatives. The structures of major antioxidants, which were isolated by semi-preparative RP-HPLC with two tandem C18 columns, were further confirmed using UV-vis absorption spectroscopy and 13C NMR spectra. Quercetin 3-O-xylosyl (1' --> 2') glucoside, quercetin 3-O-glucosyl (1' --> 6') glucoside, quercetin 3-O-glucoside and quercetin 3-O-(6'-O-malonyl)-glucoside were first identified and characterized as major antioxidants in lady's finger.     

Aqua(nitrilo­triacetato)­(1,10‐phenanthroline)iron(III) monohydrate: a seven‐coordinate iron(III) complex

Reaction of 1,10‐phenanthroline (phen) with iron trichloride in the presence of sodium nitrilo­tri­acetate (NTA) resulted in the formation of red crystals of the title complex, [Fe(C₆H₆NO₆)(C₁₂H₈N₂)(H₂O)]·H₂O. The Fe atom has a distorted capped trigonal prismatic coordination comprised of one tetradentate NTA, one bidentate phen molecule and a water mol­ecule. Intermolecular O—H?O hydrogen bonds link the mol­ecules into infinite chains. The chains are crosslinked by hydrogen bonds involving the solvent water mol­ecule, leading to an infinite ladder packing mode.     

Determination of six polyynes in Oplopanax horridus and Oplopanax elatus using polyethylene glycol modified reversed migration microemulsion electrokinetic chromatography

A PEG‐modified reversed migration MEEKC method was developed for simultaneous determination of six polyynes, including oplopandiol, falcarindiol, oplopandiol acetate, (11S, 16S, 9Z)‐9,17‐octadecadiene‐12,14‐diyne‐1,11,16‐triol,1‐acetate, oplopantriol B, and oplopantriol A, in Oplopanax horridus and Oplopanax elatus. The running buffer containing 0.8% v/v ethyl acetate, 3.8% w/v SDS, 6.6% v/v n‐butanol in 20 mM phosphate buffer (pH 2.5), followed by mixing with propan‐2‐ol at 30% v/v and PEG‐1000 at 15% w/v, was applied in the analysis. The proposed method was successfully applied to determine the six polyynes in five samples of Oplopanax horridus and one of O. elatus. The result showed that the types and amounts of polyynes present were obviously different when comparing the two herbs. Besides, the developed PEG‐modified reversed MEEKC method might be suitable for the analysis of hydrophobic analytes in herbal medicines.     

[CpIrCl2]2-catalysed cyclization of 2-alkynylanilines into indoles

[Cp^∗IrCl₂]₂ catalyses the cyclization of 2-alkynylanilines into indoles. A wide variety of substrates is tolerated. A reaction pathway involving intramolecular hydroamination is proposed.     

Shape‐directed platinum nanoparticle synthesis: nanoscale design of novel catalysts

Platinum‐based catalytic materials have received significant attention, particularly in the shape and size control of faceted materials for catalysis. More recently, there has been a rapid increase in the number of reports of successful preparations in this field; however, a fundamental understanding of controlled growth towards catalytic material design is essential for future implementation and broad application. In this review, we provide an overview of the recent findings reported since 2009, focusing on methods for shape control as well as the effects of exposed surface facets on select catalytic reactions. Copyright © 2013 John Wiley & Sons, Ltd.     

Balancing the Rate of Cluster Growth and Etching for Gram‐Scale Synthesis of Thiolate‐Protected Au25 Nanoclusters with Atomic Precision

We report a NaOH‐mediated NaBH₄ reduction method for the synthesis of mono‐, bi‐, and tri‐thiolate‐protected Au₂₅ nanoclusters (NCs) with precise control of both the Au core and thiolate ligand surface. The key strategy is to use NaOH to tune the formation kinetics of Au NCs, i.e., reduce the reduction ability of NaBH₄ and accelerate the etching ability of free thiolate ligands, leading to a well‐balanced reversible reaction for rapid formation of thermodynamically favorable Au₂₅ NCs. This protocol is facile, rapid (≤3 h), versatile (applicable for various thiolate ligands), and highly scalable (>1 g Au NCs). In addition, bi‐ and tri‐thiolate‐protected Au₂₅ NCs with adjustable ratios of hetero‐thiolate ligands were easily obtained. Such ligand precision in molecular ratios, spatial distribution and uniformity resulted in richly diverse surface landscapes on the Au NCs consisting of multiple functional groups such as carboxyl, amine, and hydroxy. Analysis based on NMR spectroscopy revealed that the hetero‐ligands on the NCs are well distributed with no ligand segregation. The unprecedented synthesis of multi‐thiolate‐protected Au₂₅ NCs may further promote the practical applications of functional metal NCs.     

MS-based metabolomics revealing Bornean Sinularia sp. extract dysregulated lipids triggering programmed cell death in Hepatocellular carcinoma

Abstract

Soft coral, Sinularia sp. had been proven to inherit promising anti-cancer properties against variety of cancer. Current study, Sinularia sp. extract was introduced to Hepatocellular carcinoma (Hep 3B). Cell viability assay indicated the extract exhibit a dose and time dependent cytotoxicity. LC₅₀ exhibited the lowest at 72?h post treatment estimated as 45.3 µg/mL. Morphological alterations including nuclear condensation, cytoplasm shrinkage and deformed cellular shape in treated Hep 3B were observable. Chemometric analysis revealed hydrophobic metabolites were significantly altered. Elevated vitamin D and derivatives tend to up-regulation Ca²⁺ and ROS subsequently triggering apoptosis. Dysregulated glycerolipids may suggest that they were biotransformed to compensate the needs of phospholipids during cell damage. Perturbation of sphingolipids, ceramide and carbohydrate-conjugated ceramides species increased the release of pro-apoptotic components reside within mitochondria and promote programmed cell death in treated Hep 3B. To conclude, MS-based metabolomics enabled the characterization of Sinularia sp. extract-induced cell death.