Photophysical characterization of a highly conjugated bipyridyl-based dye synthesized by a unique two-step approach

In this article, we present a new and simple, yet efficient, two-step approach to synthesize 4,4'-bis(dibutylaminostyrylstyryl)-2,2'-bipyridine with high yield, as well as its linear and nonlinear optical characterizations in THF and toluene solutions. We show that its one- and two-photon absorption spectra are similar in both solvents. Nevertheless, the relaxation processes of this compound exhibit dependence on the solvent polarity. The one- and two-photon induced fluorescence signal of this molecule in solution reveals that its excited state is highly stabilized in THF solution rather than in toluene. Analysis of the fluorescence quantum yield, lifetime, and radiative and nonradiative decay rates are in agreement with Lippert's model for solute-solvent interactions. The optical measurements demonstrate that this dye is a promising candidate for multiphoton fluorescence imaging, optical limiting, and dye lasers.     

Effect of temperature on the chromatographic retention of ionizable compounds. III. Modeling retention of pharmaceuticals as a function of eluent pH and column temperature in RPLC

We propose a general simple equation for accurately predicting the retention factors of ionizable compounds upon simultaneous changes in mobile phase pH and column temperature at a given hydroorganic solvent composition. Only four independent experiments provide the input data: retention factors measured in two pH buffered mobile phases at extreme acidic and basic pH values (e. g., at least +/- 2 pH units far from the analyte pK(a)) and at two column temperatures. The equations, derived from the basic thermodynamics of the acid-base equilibria, additionally require the knowledge of the solute pK(a )and enthalpies of acid-base dissociation of both the solute and the buffer components in the hydroorganic solvent mixture. The performance of the predictive model is corroborated with the comparison between theoretical and experimental retention factors of several weak acids and bases of important pharmacological activity, in mobile phases containing different buffer solutions prepared in 25% w/w ACN in water and at several temperatures.     

Rotationally resolved electronic spectra of 2- and 3-methylanisole in the gas phase: a study of methyl group internal rotation

Rotationally resolved fluorescence excitation spectra of several torsional bands in the S1 <-- S0 electronic spectra of 2-methylanisole (2MA) and 3-methylanisole (3MA) have been recorded in the collision-free environment of a molecular beam. Some of the bands can be fit with rigid rotor Hamiltonians; others exhibit perturbations produced by the coupling between the internal rotation of the methyl group and the overall rotation of the entire molecule. Analyses of these data show that 2MA and 3MA both have planar heavy-atom structures; 2MA has trans-disposed methyl and methoxy groups, whereas 3MA has both cis- and trans-disposed substituents. The preferred orientations (staggered or eclipsed) in two of the conformers and the internal rotation barriers of the methyl groups in all three conformers change when they are excited by light. Additionally, the values of the barriers opposing their motion depend on the relative positions of the substituent groups, in both electronic states. In contrast, no torsional motions of the attached methoxy groups were detected. Possible reasons for these behaviors are discussed.     

Interaction of giant extracellular Glossoscolex paulistus hemoglobin (HbGp) with zwitterionic surfactant N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (HPS): effects of oligomeric dissociation

The present work focuses on the interaction between the zwitterionic surfactant N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (HPS) and the giant extracellular hemoglobin of Glossoscolex paulistus (HbGp). Electronic optical absorption, fluorescence emission and circular dichroism spectroscopy techniques, together with Gel-filtration chromatography, were used in order to evaluate the oligomeric dissociation as well as the autoxidation of HbGp as a function of the interaction with HPS. A peculiar behavior was observed for the HPS–HbGp interaction: a complex ferric species formation equilibrium was promoted, as a consequence of the autoxidation and oligomeric dissociation processes. At pH 7.0, HPS is more effective up to 1 mM while at pH 9.0 the surfactant effect is more intense above 1 mM. Furthermore, the interaction of HPS with HbGp was clearly less intense than the interaction of this hemoglobin with cationic (CTAC) and anionic (SDS) surfactants. Probably, this lower interaction with HPS is due to two factors: (i) the lower electrostatic attraction between the HPS surfactant and the protein surface ionic sites when compared to the electrostatic interaction between HbGp and cationic and anionic surfactants, and (ii) the low cmc of HPS, which probably reduces the interaction of the surfactant in the monomeric form with the protein. The present work emphasizes the importance of the electrostatic contribution in the interaction between ionic surfactants and HbGp. Furthermore, in the whole HPS concentration range used in this study, no folding and autoxidation decrease induced by this surfactant were observed. This is quite different from the literature data on the interaction between surfactants and tetrameric hemoglobins, that supports the occurrence of this behavior for the intracellular hemoglobins at low surfactant concentration range. Spectroscopic data are discussed and compared with the literature in order to improve the understanding of hemoglobin–surfactant interaction as well as the acid isoelectric point (pI) influence of the giant extracellular hemoglobins on their structure–activity relationship.     

Extraction of Pb(II), Cd(II), and Hg(II) from aqueous solution by nitrogen and thiol functionality grafted to silica gel measured by calorimetry

The reaction of ethylene sulfide with 3-aminopropyltrimethoxysilane gave a new silylating agent, which was anchored onto a silica surface via the sol–gel procedure. This surface displayed a chelating moiety containing nitrogen and two sulfur basic centers potentially capable of extracting cations from aqueous solutions. The process of metal extraction was followed by a batch method, and fitted to a modified Langmuir equation. The maximum adsorption capacities found were: 2.06 ± 0.01, 3.72 ± 0.02, and 5.14 ± 0.02 mmol g⁻¹ for Pb(II), Cd(II), and Hg(II), respectively. The enthalpies of bending are: −1.16 ± 0.04, −3.60 ± 0.10, and −8.94 ± 0.03 kJ mol⁻¹ for Cd(II), Pb(II), and Hg(II), respectively. The Gibbs free energies of binding agree with the spontaneity of the proposed reactions between cations and basic centers.     

Hollow-fiber flow field-flow fractionation: a gentle separation method for mass spectrometry of native proteins

Low-impact ionization sources like electrospray ionization (ESI) and matrix-assisted, laser desorption/ionization (MALDI) equipped with time-of-flight (TOF) mass analyzers provide intact protein analysis over a very wide molar mass range. ESI/TOFMS provides also indications on the higher-order structure of intact proteins and non-covalent protein complexes. However, direct analysis of intact proteins mixtures in real samples shows limited success, mainly because spectra become very complex to interpret. This is also due to sample contaminants, and to the mechanism of competitive ionization in ESI or MALDI. Rapid and efficient sample clean-up and separation methods can significantly enhance the power of TOFMS for intact protein analysis. However, if protein native conditions want to be maintained, the methods should affect neither the three-dimensional structure nor the non-covalent chemistry of the proteins. Reversed-phase (RP) HPLC, size-exclusion chromatography (SEC), and capillary zone electrophoresis (CZE) are on-line or off-line coupled to ESI/TOFMS or MALDI/TOFMS. In fact, these separation methods often show limitations when applied to the analysis of native proteins. Organic modifiers and saline buffers are required in the case of RP HPLC or CZE. They can induce protein degradation or affect ionization when MS is performed after separation. High voltages used in CZE can contribute to alter proteins from their native form. In the case of high molar mass proteins, SEC is scarcely selective, and barely able to detect protein aggregates. Sample entanglement/adsorption on the stationary phase can also occur.     

DNA three-way junction with a dinuclear iron(II) supramolecular helicate at the center: a NMR structural study

A tetracationic supramolecular helicate, [Fe2L3]4+ (L = C25H20N4), with a triple-helical architecture is found to induce the formation of a three-way junction (3WJ) of deoxyribonucleotides with the helicate located in the center of the junction. NMR spectroscopic studies of the interaction between the M enantiomer of the helicate and two different oligonucleotides, [5'-d(TATGGTACCATA)]2 and [5'-d(CGTACG)]2, show that, in each case, the 2-fold symmetry of the helicate is lifted, while the 3-fold symmetry around the helicate axis is retained. The 1:3 helicate/DNA stoichiometry estimated from 1D NMR spectra supports a molecular model of a three-way junction composed of three strands. Three separate double-helical arms of the three-way junction are chemically identical giving rise to one set of proton resonances. The NOE contacts between the helicate and DNA unambiguously show that the helicate is fitted into the center of the three-way junction experiencing a hydrophobic 3-fold symmetric environment. Close stacking interactions between the ligand phenyl groups and the nucleotide bases are demonstrated through unusually large downfield shifts (1-2 ppm) of the phenyl protons. The unprecedented 3WJ arrangement observed in solution has also been found to exist in the crystal structure of the helicate adduct of [d(CGTACG)2] (Angew. Chem., Int. Ed. 2006, 45, 1227).     

Influence of the Solvent on the “Casting” Methodology for MWCNT‐Modified Glassy Carbon and Platinum Electrodes

The choice of electrode material and surface preparation method are usually dictated by the suitability of the electrode to observe an electrochemical parameter, such as heterogeneous electron transfer rate, surface coverage, or redox potential. Thus, the glassy carbon (GC) and platinum (Pt) electrodes were modified with multiwalled carbon nanotubes (MWCNT) by direct “casting” modification using nine different aliquots of solvents. After drying at room temperature, the modified electrode showed distinct redox peaks corresponding to ferrocyanide oxidation/reduction. Using chemometrics, the cyclic voltammograms with higher current intensity were obtained for those in which ethanol, water and acetone as dispersing agents were used for GCE and dimethylformamide, water and acetone for Pt electrode modification.     

Entropically Driven Self‐Assembly of Lysinibacillus sphaericus S‐Layer Proteins Analyzed Under Various Environmental Conditions

S‐Layer proteins are an example of bionanostructures that can be exploited in nanofabrication. In addition to their ordered structure, the ability to self‐assembly is a key feature that makes them a promising technological tool. Here, in vitro self‐assembly kinetics of SpbA was investigated, and found that it occurs at a rate that is dependent on temperature, its concentration, and the concentration of calcium ions and sodium chloride. The activation enthalpy (120.81 kJ · mol^?1) and entropy (129.34 J · mol^?1 · K^?1) obtained infers that the incorporation of monomers incurs in a net loss of hydrophobic surface. By understanding how the protein monomers drive the self‐assembly at different conditions, the rational optimization of this process was feasible.

     

Polarized Absorption,Spontaneous and Stimulated Blue Light Emission of J‐type Tetraphenylbutadiene Monocrystals

Blue amplified spontaneous emission at room temperature is demonstrated from the exposed face of the strongly emitting organic semiconductor 1,1,4,4‐tetraphenyl‐1,3‐butadiene in single crystal form. The symmetry of the crystal and calculation of lattice sums indicate the J‐type organization of the molecular transition moments. The minimum in the lowest exciton dispersion branch, from which emission takes place, is found at the edge of the Brillouin zone leading to a dominant vibronic emission since the zero‐phonon line is forbidden. The observed gain narrowed line is attributed to the vibronic replica which becomes amplified with increased pumping. The reported emission is along the normal to the exposed crystal face, important for the development of vertical cavity geometry lasers based on organic single crystals. The threshold excitation fluence of 400 μJ cm^?2 is comparable to other organic crystalline systems, even if the amplification path is much reduced as a consequence of the vertical geometry. Considering these relevant aspects, the optical characterization of this material is provided. The polarized absorption spectra are reported and the properties of the lowest‐energy excitonic state investigated. Calculation of the electronic transitions for the isolated molecule, lattice sums for the transition at lowest energy, and the symmetry of the crystal allow attributing the largest face of the samples and the observed optical bands in the spectra. Polarized time‐resolved spectra are also reported allowing to identify the intrinsic excitonic emission.