Cyclic (ALN)n Compounds as Precursors to Aluminum Nitride: Synthesis and Structure of [(CH3)2AlNH2]3 and the Planar Species [(t-C4H9)2AlNH2]3

Abstract

The crystal and molecular structures of the title compounds, [(CH₃)₂AlNH₂]₃ 1 and [(t-C₄H₉)₂AlNH₂]₃ 2, have been determined in connection with their investigation as possible precursors to aluminum nitride. Both compounds have an (AlN)₃ ring-structure with distorted tetrahedral geometries for the ring Al and N atoms. The distortion from tetrahedral geometry is most pronounced for the N atoms where the endocyclic Al-N-Al bond angles average 125.3 for 1 and 134.2 for 2. The (AlN)₃ ring in 1 is in a skew-boat conformation with no unusual intra- or intermolecular contacts. Compound 2 on the other hand exhibits an unprecedented planar (AlN)₃ ring as required by a crystallographic three-fold symmetry axis. The effects of the Al and N substituents on the (AlN)₃ ring size and conformation, as well as on the endocyclic Al-N-Al bond angles, are discussed in the context of the structural results obtained for these and other (AlN)_n ring compounds.     

The Formation of Luminescent Supramolecular Ternary Complexes in Water: Delayed Luminescence Sensing of Aromatic Carboxylates Using Coordinated Unsaturated Cationic Heptadentate Lanthanide Ion Complexes

The synthesis of four lanthanide ion complexes Eu?1, Eu?2, Tb?1 and Tb?2, from the heptadentate tri-arm cyclen (1,4,7,10-tetraazacyclododecane) ligands 1 and 2 that were made in one-pot syntheses is described. These coordinatively unsaturated complexes have two labile metal-bound water molecules, as demonstrated by X-ray crystallography. This was also confirmed by evaluating their hydration state (q～2) by measuring their lifetimes in D²O and H²O, respectively. The above complexes were all designed as being “photophysically silent” prior to the recognition of the anion, since they do not possess antenna that can participate in sensitisation of the Eu(III) or the Tb(III) excited state. However, the two water molecules can be displaced upon anion binding by the appropriate aromatic carboxylates to give ternary complexes in water, through either four- or six-member ring chelates (q～0), or possibly via a monodentate binding. In the case of Tb?1 and Tb?2, large luminescence enhancements were observed upon the formation of such ternary complexes with N,N-dimethylaminobenzoic acid at ambient pH. Such binding and luminescent enhancements were also observed for Tb?1 in the presence of salicylic acid. On all occasions, the anion recognition “switched” the emission “on” over two logarithmic units. At higher concentrations, the emission is reduced possibly due to quenching. In the case of aspirin, the binding was too weak to be measured, indicating that Tb?1 selectively detects salicylic acid, the active form of aspirin in water. In the case of Eu?1 and Eu?2, the affinity of these complexes towards such aromatic carboxylates was too weak for efficient ternary complex formation.     

Assessment of mobility of heavy metals in two soil types by use of column leaching experiments and chemometric evaluation of elution curves

The objectives of this study were to evaluate the mobility of heavy metals (HMs) in two types of soils (acidic forest soil and neutral agricultural soil) by leaching with calcium chloride solution in column experiments. The screening properties of neutral agricultural soil towards pollution by heavy metals (Ni, Cu, Zn and Cd) are approximately 10 times higher than those of acid forest soil. The neutral agricultural soil, polluted artificially by one pore volume (PV) of an HMs solution of concentration 200 mg L^?1, can screen the leaching of these metals over several hundreds of years. The higher apparent desorption rate and per cent desorption of HMs (especially Cd) in acid forest soil indicated a higher potential of intensive migration of the metals across the profile and indicated potential risk of Cd pollution for this type of soil. The latest approach of artificial neural networks to describe transport of HMs in soil has been also evaluated. Using a simple three-layer perceptron topology with three hidden neurons, the experimental data could be simulated. The results suggested that the pH of soil is a major factor controlling the retention of the heavy metals in the soils.     

Hybrid phospholipid bilayer coatings for separations of cationic proteins in capillary zone electrophoresis

Protein separations in CZE suffer from nonspecific adsorption of analytes to the capillary surface. Semipermanent phospholipid bilayers have been used to minimize adsorption, but must be regenerated regularly to ensure reproducibility. We investigated the formation, characterization, and use of hybrid phospholipid bilayers (HPBs) as more stable biosurfactant capillary coatings for CZE protein separations. HPBs are formed by covalently modifying a support with a hydrophobic monolayer onto which a self‐assembled lipid monolayer is deposited. Monolayers prepared in capillaries using 3‐cyanopropyldimethylchlorosilane (CPDCS) or n‐octyldimethylchlorosilane (ODCS) yielded hydrophobic surfaces with lowered surface free energies of 6.0 ± 0.3 or 0.2 ± 0.1 mJ m^?2, respectively, compared to 17 ± 1 mJ m^?2 for bare silica capillaries. HPBs were formed by subsequently fusing vesicles comprised of 1,2‐dilauroyl‐sn‐glycero‐3‐phosphocholine or 1,2‐dioleoyl‐sn‐glycero‐3‐phosphocholine to CPDCS‐ or ODCS‐modified capillaries. The resultant HPB coatings shielded the capillary surface and yielded reduced electroosmotic mobility (1.3–1.9 × 10^?4 cm² V^?1s^?1) compared to CPDCS‐ and ODCS‐modified or bare capillaries (3.6 ± 0.2 × 10^?4 cm² V^?1s^?1, 4.8 ± 0.4 × 10^?4 cm² V^?1s^?1, and 6.0 ± 0.2 × 10^?4 cm² V^?1s^?1, respectively), with increased stability compared to phospholipid bilayer coatings. HPB‐coated capillaries yielded reproducible protein migration times (RSD ≤ 3.6%, n ≥ 6) with separation efficiencies as high as 200 000 plates/m.     

4-Phosphoryl Pyrazolones for Highly Selective Lithium Separation from Alkali Metal Ions

Effective receptors for the separation of Li⁺ from a mixture with other alkali metal ions under mild conditions remains an important challenge that could benefit from new approaches. In this study, it is demonstrated that the 4-phosphoryl pyrazolones, H L ²-H L ⁴, in the presence of the typical industrial organophosphorus co-ligands tributylphosphine oxide (TBPO), tributylphosphate (TBP) and trioctylphosphine oxide (TOPO), are able to selectively recognise and extract lithium ions from aqueous solution. Structural investigations in solution as well as in the solid state reveal the existence of a series of multinuclear Li⁺ complexes that include dimers (TBPO, TBP) as well as rarely observed trimers (TOPO) and represent the first clear evidence for the synergistic role of the co-ligands in the extraction process. Our findings are supported by detailed NMR, MS and extraction studies. Liquid-liquid extraction in the presence of TOPO revealed an unprecedented high Li⁺ extraction efficiency (78 %) for H L ⁴ compared to the use of the industrially employed acylpyrazolone H L ¹ (15 %) and benzoyl-1,1,1-trifluoroacetone (52 %) extractants. In addition, a high selectivity for Li⁺ over Na⁺, K⁺ and Cs⁺ under mild conditions (pH ∼8.2) confirms that H L ²-H L ⁴ represent a new class of ligands that are very effective extractants for use in lithium separation.     

Fluctuations of permeable interfaces in water-in-water emulsions

The fluctuations of highly permeable interfaces, encountered in phase-separated biopolymer solutions, liposomes, polymersomes, or colloidosomes, are investigated. An expression for the power spectrum of the height correlation function is derived for a multicomponent system, incorporating the effects of mass transfer across the interface, using nonequilibrium thermodynamics. We also derive an expression for the relaxation time of the height correlation function, and calculate the relaxation time for a phase-separated gelatin-dextran-water system. Comparing our expression with the expression for an impermeable interface shows that mass transfer has a significant impact on the relaxation time of the interface.     

Growth and Atomic-Scale Characterization of Ultrathin Silica and Germania Films: The Crucial Role of the Metal Support

The present review reports on the preparation and atomic-scale characterization of the thinnest possible films of the glass-forming materials silica and germania. To this end state-of-the-art surface science techniques, in particular scanning probe microscopy, and density functional theory calculations have been employed. The investigated films range from monolayer to bilayer coverage where both, the crystalline and the amorphous films, contain characteristic XO₄ (X=Si,Ge) building blocks. A side-by-side comparison of silica and germania monolayer, zigzag phase and bilayer films supported on Mo(112), Ru(0001), Pt(111), and Au(111) leads to a more general comprehension of the network structure of glass former materials. This allows us to understand the crucial role of the metal support for the pathway from crystalline to amorphous ultrathin film growth.     

Zn2+‐Regulated Self‐Sorting and Mixing of Phosphates and Carboxylates on the Surface of Functionalized Gold Nanoparticles

Herein, we describe the self‐sorting of phosphate‐ and carboxylate‐containing molecules on the surface of monolayer‐protected gold nanoparticles. Self‐sorting is driven by selective interactions between the phosphate probe and Zn²⁺ complexes in one monolayer; these interactions force the carboxylate probe to move to a second type of nanoparticle. This process effectively separates the probes and causes their localization in well‐defined spaces surrounding the nanoparticles. The removal/addition of Zn²⁺ metal ions from the system is used to convert the system from an ordered to a disordered state and vice versa. The possibility to control the location and transport of populations of molecules in a complex mixture creates new perspectives for the development of innovative complex catalytic systems that mimic nature.     

Spatially Resolved Confocal Resonant Raman Microscopic Analysis of Anode‐Grown Geobacter sulfurreducens Biofilms

When grown on the surface of an anode electrode, Geobacter sulfurreducens forms a multi‐cell thick biofilm in which all cells appear to couple the oxidation of acetate with electron transport to the anode, which serves as the terminal metabolic electron acceptor. Just how electrons are transported through such a biofilm from cells to the underlying anode surface over distances that can exceed 20 microns remains unresolved. Current evidence suggests it may occur by electron hopping through a proposed network of redox cofactors composed of immobile outer membrane and/or extracellular multi‐heme c‐type cytochromes. In the present work, we perform a spatially resolved confocal resonant Raman (CRR) microscopic analysis to investigate anode‐grown Geobacter biofilms. The results confirm the presence of an intra‐biofilm redox gradient whereby the probability that a heme is in the reduced state increases with increasing distance from the anode surface. Such a gradient is required to drive electron transport toward the anode surface by electron hopping via cytochromes. The results also indicate that at open circuit, when electrons are expected to accumulate in redox cofactors involved in electron transport due to the inability of the anode to accept electrons, nearly all c‐type cytochrome hemes detected in the biofilm are oxidized. The same outcome occurs when a comparable potential to that measured at open circuit (?0.30 V vs. SHE) is applied to the anode, whereas nearly all hemes are reduced when an exceedingly negative potential (?0.50 V vs. SHE) is applied to the anode. These results suggest that nearly all c‐type cytochrome hemes detected in the biofilm can be electrochemically accessed by the electrode, but most have oxidation potentials too negative to transport electrons originating from acetate metabolism. The results also reveal a lateral heterogeneity (x–y dimensions) in the type of c‐type cytochromes within the biofilm that may affect electron transport to the electrode.     

Atropisomers of meso Tetra(N-Mesyl Pyrrol-2-yl) Porphyrins: Synthesis,Isolation and Characterization of All-Pyrrolic Porphyrins

Atropisomerism has been observed in a variety of biaryl compounds and meso-aryl substituted porphyrins. However, in porphyrins, this phenomenon had been shown only with o-substituted 6-membered aromatic groups at the meso-position. We show herein that a 5-membered heteroaromatic (N-mesyl-pyrrol-2-yl) group at the meso-position leads to atropisomerism. In addition, we report a ‘one-pot’ synthetic route for the synthesis of ‘all-pyrrolic’ porphyrin (APP) with several N-protection groups (Boc, Cbz, Ms and Ts). Among these groups, we found that only the Ms group gave four individually separable atropisomers of meso-tetra(N-Ms-pyrrol-2-yl) porphyrin. Furthermore, the reductive removal of Cbz- was achieved to obtain meso-tetra(pyrrol-2-yl) porphyrin. Thus, our synthetic procedure provides an easy access to a group of APPs and stable atropisomers, which is expected to expand the application of novel APP-based materials.