Temperature measurements of binary droplets using three-color laser-induced fluorescence

Evaporation of multicomponent droplets is a critical problem in many engineering applications, for example spray combustion. Knowledge of droplet temperature is a key issue in understanding the highly complex heat and mass-transfer phenomena related to multicomponent droplet evaporation and combustion. In this work, optical diagnosis based on three color-laser-induced fluorescence was developed: the objective was to measure the temperature of binary droplets (ethanol and acetone mixtures), even when the composition varies with time. Demonstration on an overheated droplet stream of acetone–ethanol mixtures is described and the experimental data are compared with results from a numerical simulation based on the discrete-components model.     

Sticking and desorption of hydrogen on graphite: a comparative study of different models

We study the physisorption of atomic hydrogen on graphitic surfaces with four different quantum mechanical methods: perturbation and effective Hamiltonian theories, close coupling wavepacket, and reduced density matrix propagation methods. Corrugation is included in the modeling of the surface. Sticking is a fast process which is well described by all methods. Sticking probabilities are of the order of a few percent in the collision energy range 0-25 meV, but are enhanced for collision energies close to those of diffraction resonances. Sticking also increases with surface temperature. Desorption is a slow process which involves multiphonon processes. We show, however, how to correct the close coupling wavepacket method to account for such phenomena and obtain correct time constants for initial state decay. Desorption time constants are in the range of 20-50 ps for a surface temperature of 300 K.     

Chain-extending of Hydroxytelechelic Polybutadiene: Synthesis and Characterization

Extension of hydroxytelechelic polybutadiene oligomers ( 3200 g/mol) is performed in mild conditions, in order to avoid backbone modifications, using succinic anhydride or methylenedicyclohexyl diisocyanate. The two routes present significative extension of the initial oligomers. Extension through the anhydride route, in the presence of DCC and DMAP, leads to new hydroxytelechelic oligomers ( 8000 g/mol). Extension through the diisocyanate route, catalyzed by DBTL at 65°C leads to hydroxytelechelic oligomers of higher average molecular weight ( 20000 g/mol). New materials are characterized by FTIR/¹H-NMR and changes in their Tg according to , are discussed. The influence of reaction time on the length of the macromolecular chains is also studied.     

Gas-Phase Structure of Amyloid-β (12 – 28) Peptide Investigated by Infrared Spectroscopy, Electron Capture Dissociation and Ion Mobility Mass Spectrometry

The gas-phase structures of doubly and triply protonated Amyloid-β_12-28 peptides have been investigated through the combination of ion mobility (IM), electron capture dissociation (ECD) mass spectrometry, and infrared multi-photon dissociation (IRMPD) spectroscopy together with theoretical modeling. Replica-exchange molecular dynamics simulations were conducted to explore the conformational space of these protonated peptides, from which several classes of structures were found. Among the low-lying conformers, those with predicted diffusion cross-sections consistent with the ion mobility experiment were further selected and their IR spectra simulated using a hybrid quantum mechanical/semiempirical method at the ONIOM DFT/B3LYP/6-31 g(d)/AM1 level. In ECD mass spectrometry, the c/z product ion abundance (PIA) has been analyzed for the two charge states and revealed drastic differences. For the doubly protonated species, N – C_α bond cleavage occurs only on the N and C terminal parts, while a periodic distribution of PIA is clearly observed for the triply charged peptides. These PIA distributions have been rationalized by comparison with the inverse of the distances from the protonated sites to the carbonyl oxygens for the conformations suggested from IR and IM experiments. Structural assignment for the amyloid peptide is then made possible by the combination of these three experimental techniques that provide complementary information on the possible secondary structure adopted by peptides. Although globular conformations are favored for the doubly protonated peptide, incrementing the charge state leads to a conformational transition towards extended structures with 3₁₀- and α-helix motifs.      

Adsorption of bovine serum albumin on amorphous carbon surfaces studied with dip pen nanolithography

This article reports the use of dip pen nanolithography (DPN) for the study of adsorption of bovine serum albumin (BSA) proteins on amorphous carbon surfaces; tetrahedral amorphous carbon (t-aC) and silicon doped hydrogenated amorphous carbon (a-C:H:Si). Contact angle study shows that the BSA proteins reduce the contact angle on both carbon materials. We also noticed that the drop volume dependence is consistent with a negative line tension, i.e. due to an attractive protein/surface interaction. The DPN technique was used to write short-spaced (100 nm) BSA line patterns on both samples. We found a line merging effect, stronger in the case of the a-C:H:Si material. We discuss possible contributions from tip blunting, scratching, cross-talk between lever torsion and bending and nano-shaving of the patterns. We conclude that the observed effect is caused in large measure by the diffusion of BSA proteins on the amorphous carbon surfaces. This interpretation of the result is consistent with the contact angle data and AFM force curve analysis indicating larger tip/surface adhesion and spreading for the a-C:H:Si material. We conclude by discussing the advantages and limitations of DPN lithography to study biomolecular adsorption in nanoscale wetting environments.     

Decomposition thermique du bis (η-cyclopentadienyle dicarbonyle fer)

Journal of Thermal Analysis and Calorimetry - La décomposition thermique du bis(η-cyclopentadiényle dicarbonyle fer) dans une atmosphère inerte à 165° conduit à...     

Electrical properties of evaporated a-CdTe films

The electrical dc conductivity of amorphous CdTe thin films evaporated in a high vacuum system has been measured in situ as deposited on a cold substrate and after various annealings from 100 K up to 365 K. The investigated features are analysed according to the Mott model.     

Liquid chromatography coupled to tandem mass spectrometry for the analysis of inositol hexaphosphate after solid-phase extraction

Inositol hexaphosphate, a naturally occurring component in cereals and plants, is the main reserve and principal carrier of phosphate. Inositol hexaphosphate is also found in biological fluids such as urine, plasma, or whole blood. Moreover, inositol hexaphosphate is studied for its pharmaceutical applications. Liquid chromatography coupled to mass spectrometry is now the reference method for small analyte determination. However, the specific quantitation of polyanionic molecules in the biological matrix is still challenging.

In this article, a bioanalytical method for the extraction and determination of inositol hexaphosphate in whole blood is described by using solid-phase extraction followed by liquid chromatography–mass spectrometry/mass spectrometry using selected reaction monitoring mode for its specificity.

Using pentylamine in excess, an ion pair is created, enhancing sensitivity by avoiding the presence of many Na adducts on the phosphate functions of inositol hexaphosphate. Moreover, hexafluoroisopropanol was added to stabilize the ion pairs that were created. Then, a specific extraction of inositol hexaphosphate by anion-exchange solid-phase extraction was developed, resulting in an extraction recovery of 89%. The linearity of the method was verified between 0.78 and 100 µg/mL, and both accuracy and precision were greater than 85%. Finally, the endogenous rate of inositol hexaphosphate was measured in the whole blood of mice and was estimated at 2 µg/mL.     

Water as an efficient medium for the synthesis of functionalized enol ethers

Herein we report an efficient method for synthesis of β-alkylated and β,β-dialkylated α-iodo enol ethers in water. Radical addition in aqueous medium of ethyl iodoacetate, iodoacetonitrile, and iodoacetamide to ynol ethers leads to α-iodo enol ethers with moderate to excellent yields and high stereoselectivities.     

The combination of electron capture dissociation and fixed charge derivatization increases sequence coverage for <Emphasis Type="Italic">O</Emphasis>-glycosylated and <Emphasis Type="Italic">O</Emphasis>-phosphorylated peptides

Electron capture dissociation (ECD) has become an alternative method to collision-activated dissociation (CAD) to avoid gas-phase cleavage of post-translational modifications carried by side chains from the peptide backbone. Nonetheless, as illustrated herein by the study of O-glycosylated and O-phosphorylated peptides, the extent of ECD fragmentations may be insufficient to cover the entire peptide sequence and to localize accurately these modifications. The present work demonstrates that the derivatization of peptides at their N-terminus by a phosphonium group improves dramatically and systematically the sequence coverage deduced from the ECD spectrum for both O-glycosylated and O-phosphorylated peptides compared with their native counterparts. The exclusive presence of N-terminal fragments (c-type ions) in the ECD spectra of doubly charged molecular cations simplifies peptide sequence interpretation. Thus, the combination of ECD and fixed charge derivatization appears as an efficient analytical tool for the extensive sequencing of peptides bearing labile groups.