Responsive hyperbranched poly(formyl-1,2,3-triazole)s toward quadruple-modal information security protection

Science China Chemistry - Secrecy has received tremendous attention in modern information society. Innovative polymer-based fluorescent materials with multiple mode emission are quite desirable to...     

A sensitive and selective HPLC–MS3 method for therapeutic drug monitoring of meropenem and its validation by comparison with HPLC–MS2 methods

Meropenem, a representative β-lactam antibiotic, is widely used to treat complicated and serious infections. Therefore, it is of great significance to monitor the plasma drug concentration for individualized antimicrobial therapy. This study first describes the development and validation of high-performance liquid chromatography–tandem mass spectrometry cubed method for monitoring meropenem in human plasma. Protein precipitation with methanol and a chromatographic analysis time of 7 min make this method simple and of high throughput. Meropenem was extracted from human plasma with recoveries >94.1%. Calibration curves were linear (R² > 0.995) in the concentration range of 0.5–50 μg/mL. Overall accuracy and precision did not exceed 8.0% as well as no significant matrix effect was observed. The novelty of this method is that the triple-stage mass spectrometry technology improves the selectivity and sensitivity. A comparison of the presented method and traditional liquid chromatography–tandem mass spectrometry method was assessed in 44 patients treated with meropenem and Passing–Bablok regression coefficients and Bland–Altman plots showed that no significant difference between the two methods. So the triple-stage mass spectrometry method developed in this study is appropriate and practical for the monitor of meropenem in the daily clinical laboratory practice.     

Suppression of charge imbalance via Li+-Mn4+ co-incorporated Sr2YSbO6 red phosphors for warm w-LEDs

Mn⁴⁺-activated double perovskite phosphors with composition diversity have presented excellent luminescent performances. However, the charge imbalance between Mn⁴⁺ and matrix cations would increase non-radiative recombination and reduce the structural stability. Here, novel high-efficiency stable Li⁺/Mn⁴⁺ co-incorporated Sr₂YSbO₆ red phosphors are successfully synthesized via a solid-state reaction method for warm w-LEDs, where the Li⁺ ions have the effect of charge balance for Sr₂YSbO₆:Mn⁴⁺ and reduce the non-radiative energy transfer among Mn⁴⁺ ions. It is demonstrated that the substitution of Li⁺–Mn⁴⁺ pairs for Sb⁵⁺ can enhance the bonding with low-shifted diffraction peaks and high emission intensity, and prolong the decay lifetime, compared with those of Mn⁴⁺ single-doped ones. Impressively, the thermal stability is enhanced to 89.72% from 84.61% at the original value of 303 K. Finally, a w-LED device based on the optimal phosphor Sr₂YSbO₆:0.01Mn⁴⁺/0.01Li⁺ red component exhibits a correlated color temperature of 4487 K and color rendering index of 80.2. Therefore, the incorporated Li⁺ ions serve as both charge compensator and co-activator in Mn⁴⁺-activated double perovskite phosphors with the aim of high luminescent performance and thermal stability.     

Triple-Layered Metal-Organic Framework Hybrid for Tandem Response-Driven Enhanced Chemotherapy

The precise release of drugs is essential to improve cancer therapeutic efficacy. In this work, a tandem responsive strategy was developed based on a triple-layered metal-organic framework (MOF) hybrid. The MOF nanoprobe was stepwise fabricated with a telomerase-responsive inner, a pH-sensitive MOF filling and H₂O₂-responsive coordination complex shell of Fe³⁺ and eigallocatechin gallate (EGCG). In the tumor microenvironment, the shell was dissociated by endogenous H₂O₂ and simultaneously produced highly reactive hydroxyl radicals by a Fenton reaction. Meanwhile, the released EGCG could downregulate the expression of P-glycoprotein responsible for drug resistance. After the dissociation of the framework by protons, telomerase could trigger the release of the drug from the DNA duplex on the exposed inner shell. By integrating confined drug release, inhibited efflux pump and chemodynamic therapy, the all-in-one chemotherapy strategy was identified with enhanced therapeutic efficacy in drug-resistant cancer cells.     

The Chemical Compositions,and Antibacterial and Antioxidant Activities of Four Types of Citrus Essential Oils

Nanfeng mandarins (Citrus reticulata Blanco cv. Kinokuni), Xunwu mandarins (Citrus reticulata Blanco), Yangshuo kumquats (Citrus japonica Thunb) and physiologically dropped navel oranges (Citrus sinensis Osbeck cv. Newhall) were used as materials to extract peel essential oils (EOs) via hydrodistillation. The chemical composition, and antibacterial and antioxidant activities of the EOs were investigated. GC-MS analysis showed that monoterpene hydrocarbons were the major components and limonene was the predominate compound for all citrus EOs. The antibacterial testing of EOs against five different bacteria (Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa and Salmonella typhimurium) was carried out using the filter paper method and the broth microdilution method. Kumquat EO had the best inhibitory effect on B. subtilis, E. coli and S. typhimurium with MIC (minimum inhibitory concentration) values of 1.56, 1.56 and 6.25 µL/mL, respectively. All citrus EOs showed the antioxidant activity of scavenging DPPH and ABTS free radicals in a dose-dependent manner. Nanfeng mandarin EO presented the best antioxidant activity, with IC₅₀ values of 15.20 mg/mL for the DPPH assay and 0.80 mg/mL for the ABTS assay. The results also showed that the antibacterial activities of EOs might not be related to their antioxidant activities.     

Phase‐Junction Electrocatalysts towards Enhanced Hydrogen Evolution Reaction in Alkaline Media

To ensure sustainable hydrogen production by water electrolysis, robust, earth‐abundant, and high‐efficient electrocatalysts are required. Constructing a hybrid system could lead to further improvement in electrocatalytic activity. Interface engineering in composite catalysts is thus critical to determine the performance, and the phase‐junction interface should improve the catalytic activity. Here, we show that nickel diphosphide phase junction (c‐NiP₂/m‐NiP₂) is an effective electrocatalyst for hydrogen production in alkaline media. The overpotential (at 10 mA cm^?2) for NiP₂‐650 (c/m) in alkaline media could be significantly reduced by 26 % and 96 % compared with c‐NiP₂ and m‐NiP₂, respectively. The enhancement of catalytic activity should be attributed to the strong water dissociation ability and the rearrangement of electrons around the phase junction, which markedly improved the Volmer step and benefited the reduction process of adsorbed protons.     

磁共振扩散加权成像联合血清AFP对小肝癌临床诊断及疗效评估的价值

将194例小肝癌患者纳入小肝癌组,185例肝细胞结节患者纳入结节组,所有患者均行MRI扩散加权成像(DWI-MRI),评估患者在DWI-MRI上的形态学表现及ADC值,检测患者血清AFP水平,比较不同检测方法诊断小肝癌的准确度、灵敏度、特异度。结果显示,应用DWI-MRI联合血清AFP诊断小肝癌的特异度、灵敏度和准确度均显著高于单独应用DWI-MRI,或血清AFP(P<0.05)。表明DWI-MRI联合血清AFP对小肝癌的诊断价值显著,可为病情评估提供切实可行的参考。     

Rapid Preparation of Mesoporous Methylsilsesquioxane Aerogels by Microwave Heating Technology

Microwave heating technology is known as an alternative to traditional gas and electric heating sources. In this work, mesoporous methylsilsesquioxane (MSQ) aerogels were prepared via a sol–gel process accompanied by microwave heating technology, and microwave heating was used in the gelation of sol and the drying of wet gels, respectively. The effects of hexadecyltrimethylammonium chloride (CTAC) as a surfactant and template, hydrochloric acid (HCl) as a catalyst, ethanol as a solvent, sodium hydroxide (NaOH) as a gelation agent, and microwave power on the pore structure of as-prepared MSQ aerogels were investigated in detail. Microwave heating at low power results in the acceleration of sol–gel transition and achieves the gelation within a few minutes. Appropriate amounts of chemical reagents and microwave heating at high power allow the preparation of mesoporous MSQ aerogels with a BET-specific surface area of 681.6 m²·g⁻¹ and a mesopore size of 19 nm, and the resultant MSQ aerogel still has a BET specific surface area as high as 134 m²·g⁻¹ after heat treatment at 600 °C for 2 h, showing high thermal stability. The MSQ aerogels/fibre composite possesses a low thermal conductivity of 0.039 W/(m·k)⁻¹, displaying good thermal insulation. Microwave heating technology is a promising heating method for the preparation of other aerogels.     

The Total Solubility of the Co-Solubilized PAHs with Similar Structures Indicated by NMR Chemical Shift

The synergism/inhibition level, solubilization sites and the total solubility (S_t) of co-solubilization systems of phenanthrene, anthracene and pyrene in Tween 80 and sodium dodecyl sulfate (SDS) are studied by ¹H-NMR, 2D nuclear overhauser effect spectroscopy (NOESY) and rotating frame overhauser effect spectroscopy (ROESY). In Tween 80, inhibition for phenanthrene, anthracene and pyrene is observed in most binary and ternary systems. However, in SDS, synergism is predominant. After analysis, we find that the different synergism or inhibition situation between Tween 80 and SDS is related to the different types of surfactants used and the resulting different co-solubilization mechanisms. In addition, we also find that three polycyclic aromatic hydrocarbons (PAHs) have similar solubilization sites in both Tween 80 and SDS, which are almost unchanged in co-solubilization systems. Due to the similar solubilization sites, the chemical shift changes of surfactant and PAH protons follow the same pattern in all solubilization systems, and the order of chemical shift changes is consistent with the order of changes in the St of PAHs. In this case, it is feasible to evaluate S_t of PAHs by chemical shift. In both Tween 80 and SDS solutions, the ternary solubilization system has relatively high S_t rankings. Therefore, in practical applications, a good overall solubilization effect can be expected.