Spectrophotometric determination of Pd(II) using 1,3 bis (2′-pyridyl)-1,2-diaza-prop-2-ene

Summary The reaction of 1,3 bis (2-pyridyl)-l,2-diaza-prop-2-ene(PAPHY) with Pd(II) to produce a coloured complex extractable into organic solvents has been used to measure microquantities of Pd(II) in acid solutions. The method is sensitive for Pd(II) concentrations of 5g and above. Method used involves the reaction of Pd(II) with the ligand PAPHY in an acid medium followed by extraction of the Pd-PAPHY complex into benzene. The red complex has 2 absorption maxima in the visible spectrum, one at 573 nm and the other at 545 nm. The interference by other divalent ions has been studied and found to be negligible.

---

Zusammenfassung Die Reaktion von 1,3-Bis-(2-pyridyl)-1,2-diaza-propen-2 (PAPHY) mit Pd(II) führt zur Bildung einer mit organischen Lösungsmitteln extrahierbaren, gefärbten Komplexverbindung und wurde zur Bestimmung von Mikromengen Pd(II) in sauren Lösungen verwendet. Die Methode eignet sich für 5g Pd(II) und mehr. Der rote Pd-PAPHY-Komplex wird aus saurem Milieu mit Benzol extrahiert und hat 2 Absorptionsmaxima im sichtbaren Bereich, u. zw. bei 573 nm und bei 545 nm. Störungen durch zweiwertige Fremdionen wurden geprüft und sind vernachlässigbar.

     

On the surface modification of microchannels for microcapillary electrophoresis chips

This paper presents systematic investigation of the microchannel surface properties in microCE chips. Three popular materials for microCE chips, polydimethylsiloxane (PDMS), quartz, and glass, are used. The zeta potentials of these microchannels are calculated by measuring the EOF velocity to evaluate the surface properties after surface modification. The hydrophobic PDMS is usually plasma-treated for microCE applications. In this study, a new method using a high-throughput atmospheric plasma generator is adopted to treat the PDMS surface under atmospheric conditions. In this approach, the cost and time for surface treatment can be significantly reduced compared with the conventional vacuum plasma generator method. Experimental results indicate that new functional groups could be formed on the PDMS surface after treatment, resulting in a change in the surface property. The time-dependent surface property of the plasma-treated PDMS is then measured in terms of the zeta potential. Results show that the surface property will reach a stable condition after 1 h of plasma treatment. For glass CE chips, two new methods for changing the microchannel surface properties are developed. Instead of using complicated and time-consuming chemical silanization procedures for CE channel surface modification, two simple and reliable methods utilizing organic-based spin-on-glass and water-soluble acrylic resin are reported. The proposed method provides a fast batch process for controlling the surface properties of glass-based CE channels. The proposed methods are evaluated using PhiX-174 DNA maker separation. The experimental data show that the surface property is modified and separation efficiency greatly improved. In addition, the long-term stability of both coatings is verified in this study. The methods proposed in this study show potential as an excellent solution for glass-based microCE chip surface modification.     

Synthesis of 4b,5,10a,11-tetrahydroindeno[1,2-b]quinolin-10-ones from Baylis-Hillman adducts

We developed an efficient synthetic method for indenoquinoline skeletons from Baylis-Hillman adducts. 4b,5,10a,11-Tetrahydroindeno[1,2-b]quinolin-10-ones and 7H-indeno[2,1-c]quinolines were prepared from Baylis-Hillman adducts in polyphosphoric acid.     

A new synthesis of 1,2,3,5‐tetrahydroimidazo[2,3‐b]‐[1,3]benzodiazocines

A new synthesis of 6‐carbomethoxy‐1,2,3,5‐tetrahydroirnidazo[2,3‐b][1,3]benzodiazocines 13 by the intramolecular cycloaddition reaction of methyl 2‐(1‐aziridinylmethyl)‐3‐(2‐ureidophenyl)propenoates 10 under Appel's dehydration conditions is described. The latter were readily obtained from 2‐nitrobenzalde‐hyde with methyl acrylate through the Baylis‐Hillman reaction.     

Hollow fiber membrane-protected solid-phase microextraction of triazine herbicides in bovine milk and sewage sludge samples

A porous polypropylene hollow fiber membrane (HFM)-protected solid-phase microextraction (HFM-SPME) procedure in conjunction with gas chromatography/mass spectrometric analysis for use in the determination of triazine herbicides in bovine milk samples is described. A 65-microm polydimethylsiloxane-divinylbenzne (PDMS-DVB) SPME fiber was protected by an HFM. HFM-SPME experimental parameters such as fiber type, extraction time, extraction temperature and salt concentration were investigated and optimized. The relative standard deviations for the reproducibility of the optimized HFM-SPME method varied from 4.30 to 12.37%. The correlation coefficients of the calibration curves were between 0.9799 and 0.9965 across a concentration range of 0-200 microg l(-1). The method detection limits for triazines in bovine milk were in the range of 0.003-0.013 microg l(-1) and limits of quantification were in the range of 0.006-0.021 microg l(-1). The suitability of HFM-SPME was extended to the analysis of the herbicides in sewage sludge samples. The results demonstrate that HFM-SPME was an efficient pretreatment and enrichment procedure for complex matrices.     

Structural Relationships between the Hemiporphyrazine Macrocyclic Ligand and its Metal Complexes. II.: Planar Neutral Ligand,C26H16N8, and Four Isomorphous Metal Complexes, [M(C26H16N8)(H2O)], M=Mn(II), Co(II), Cu(II), Zn(II)

Crystal and molecular structures of the planar neutral ligand, C₂₆H₁₆N₈, and the four isomorphous five-coordinated metal complexes, [M(C₂₆H₁₆N₈)(H₂O)], M = Mn(II), Co(II), Cu(II), Zn(II), have been determined from three-dimensional X-ray diffraction data. The free ligand hpH₂, C₂₆H₁₆N₈, belongs to the P 2₁/c space group with Z=2, a=4.142(3), b=23.736(6), c=10.338(3) Ä, β=94.66(6)°. The metal complexes monohydrate Mhp-H₂O all belong to the orthorhombic Pcab space group with Z=8. The dimensions are roughly 8.8×19.3×23.7 ų. In each structure, the macrocyclic ligand has an almost planar conformation which differs from the saddle shaped ligand hydrate (hpH₂·H₂O) and the nickel complex [Nihp]⁵. The distances from the center of the macrocyclic ring to the nitrogen atom of the free ligand are 1.907(6) and 2.245(6)Å. The coordination geometry in these four complexes is square pyramidal with a water molecule as an axial ligand. The bond distances of M(II)-O(H₂O), M(II)-N1 (imine), M(II)-N3 (pyridine) are: 2.19(1), 2.00(2), 2.27(2)Å respectively for the manganese complex; 2.08(1), 1.97(1), 2.23(1)Å for the cobalt complex; 2.33(1), 1.92(3), 2.18(1)Å for the copper complex; 2.110(5), 1.964(6), 2.252(6)Å for the zinc complex. The variation of metal-ligand distances can be correlated to the metal d orbital occupancy. A comparison with similar ligands will be presented.     

14‐Membered Cyclopeptides from Paliurus ramosissimus and P. hemsleyanus

Six 14‐membered cyclopeptide alkaloids, i.e., ramosines A–C, mucronine J, and lotusines A and D, were isolated from the roots of Paliurus ramosissimus, and an additional four, hemsines A–D, from the roots of P. hemsleyanus. Among these, ramosines A–C ( 1, 5 , and 6 , resp.) and hemsines A and B ( 7 and 8 , resp.) are new bases of the amphibine‐B type, and hemsines C and D ( 9 and 10 , resp.) are new integerrine‐type alkaloids. Additionally, ramosine C ( 6 ) represents the first 14‐membered cyclopeptide alkaloid possessing a substitution (? OH) at C(13′). Their structural elucidations were based on spectral analysis and molecular‐modeling studies. Pronounced solvent effects in the ¹H‐ and ¹³C‐NMR spectra of these two types of alkaloids were observed.     

Enhancing the enantioselectivity of lipase in transesterification by substrate matching: an enzyme memory based approach

The substrate matching strategy is described as a new approach for effectively enhancing the lipase enantioselectivity in organic solvent. In the lipase-catalyzed transesterifications of 3a-c, higher enantioselectivities have been achieved using 1a-c, respectively, as the structurally matched acyl donors.     

Potentiometric determination of silver with dithiooxamide

Potentiometric titration with dithiooxamide solution can be used to determine silver in the 0.0100–50.0 p.p.m range with an average accuracy of ca. 0.5% and a relative standard deviation ranging from 1.26% to 0.03% The metals commonly associated with silver can be masked with fluoride and EDTA The advantages of the method over other potentiometric and common spectrophotometric methods are outlined.     

Investigation of the Curing Mechanism in the GPTS/APTS Binder System

The acid catalyzed sol-gel reaction in the mixed binder system, 3-glycidoxypropyltrimethoxysilane (GPTS)/3-aminopropyltriethoxysilane (APTS) was investigated and one step and two step synthesis process were compared. Hydrolysis product was observed using the ¹H, ¹³C NMR and Raman spectra. Especially, based on the Raman spectra, epoxy ring opening was observed, varying the ratio of GPTS to APTS. The two step process made clear sol, while the one step process resulted in a milky suspension. According to the Raman spectra, the epoxy ring opening reaction kinetics proceeded slower in the two step process than one step process. Throughout the two step process, it was possible to apply the binder for the coating of substrate.