Electrochemical Assay to Quantify the Hydroxyl Radical Scavenging Activity of Medicinal Plant Extracts

A new electrochemical assay has been developed which is based on quantifying the attack of OH^. radicals on a self‐assembled thiol monolayer on electrodes in the presence and absence of antioxidants. The OH^. radicals were produced in Fenton solutions. The radical scavengers diminish the concentration of the OH^. radicals in the Fenton solution, and the extent of thiol layer destruction is monitored with the help of a redox probe in solution, the signal of which is only generated at SAM‐free electrode surface. The results of the electrochemical assay were compared with those of the standard DPPH^. assay. In case of each plant extract, an excellent linear correlation was observed between the radical scavenging activity and the concentration of plant extracts; however, the scavenging properties of different plants strongly differ in the electrochemical and the DPPH^. assay. Since the proposed new method probes the reactivity of radical scavengers towards OH^., one of the most important reactive oxygen radicals in tissues, it is supposed to provide much more relevant information than the DPPH^. or other assays.     

Quantitative analysis by comprehensive two-dimensional gas chromatography using interval Multi-way Partial Least Squares calibration

A new approach for target quantitative analysis for comprehensive two-dimensional gas chromatography (GC × GC), interval Multi-way Partial Least Square (iNPLS) is presented and evaluated in this paper. In iNPLS, the two-dimensional chromatogram is split in small sections; each of these pieces is treated as an independent new chromatogram. Separated conventional NPLS calibration models for the concentration of the target analyte are built for each of the pieces of the whole chromatogram, and the best model is selected for quantitative analysis. An algorithm for iNPLS running on MatLab platform was written, preliminarily evaluated with using solutions of model compounds with different chemical properties and subsequently applied to quantify some allergens in perfume samples. The results were found to be adequate, and good precision and accuracy was obtained even for poorly resolved peaks.     

Determination of synthetic pharmaceuticals in phytotherapeutics by capillary zone electrophoresis with contactless conductivity detection (CZE-CD)

In this work, a method for simultaneous determination of amfepramone, fenproporex, sibutramine and fluoxetine was developed by capillary zone electrophoresis with capacitively coupled contactless conductivity detection (C⁴D) using a homemade capillary electrophoretic system. The optimized conditions for the separation of the pharmaceuticals by CZE were as follows: 50 mmol L^− 1 phosphate buffer (pH 5.0) in 50/50 (v/v) mixture of water/acetonitrile as the working electrolyte, 15 kV separation voltage, 25 °C separation temperature, hydrodynamic injection by gravity using 20 cm injection height and 60 s injection time. The detection by C⁴D was carried out by using a homemade detector, which employs a sinusoidal wave generator operating at 600 kHz frequency and 2 V_pp wave amplitude. The optimized and validated CZE-C⁴D method was applied for the determination of the studied pharmaceuticals as adulterants in phytotherapeutic formulations commercialized in Brazil for slimming purposes.     

Nonhomogeneous multiparameter problems in Orlicz–Sobolev spaces

This paper is concerned with the existence and multiplicity of solutions for a class of problems involving the Φ-Laplacian operator with general assumptions on the nonlinearities, which include both semipositone cases and critical concave convex problems. The research is based on the subsupersolution technique combined with a truncation argument and an application of the Mountain Pass Theorem. The results in this paper improve and complement some recent contributions to this field.     

Interaction of meso-tetrakis (4-sulfonatophenyl) porphyrin with cationic CTAC micelles investigated by small angle X-ray scattering (SAXS) and electron paramagnetic resonance (EPR)

Small angle X-ray scattering (SAXS) and electron paramagnetic resonance (EPR) have been used to investigate the interaction of the water-soluble meso-tetrakis (4-sulfonatophenyl) porphyrin (TPPS(4)) with cationic cethyltrimethylammonium chloride (CTAC) micelles. To evaluate if the porphyrin protonation state affects its interaction with the micelle, both SAXS and EPR measurements were performed at pH 4.0 and 9.0. The best-fit SAXS curves were obtained assuming for CTAC micelle a prolate ellipsoidal shape in the absence and upon incorporation of 2-10 mM TPPS(4). SAXS results show that the presence of porphyrin impacts on micellar hydrophobic core, leading to a micellar reassembling into smaller micelles. Lineshapes of EPR spectra of 5- and 16-doxyl stearic acids (5- and 16-DSA, respectively) bound to 100 mM CTAC micelles exhibited slight changes as a function of porphyrin concentration. Spectral simulations revealed an increase of mobility restriction for both spin probes, especially at higher porphyrin concentration, where a small reduction of environment polarity was also observed for 16-DSA. The spin labels monitored only slight differences between pH 4.0 and 9.0, in agreement with the SAXS results.     

Identification of volatiles from pineapple (Ananas comosus L.) pulp by comprehensive two-dimensional gas chromatography and gas chromatography/mass spectrometry

Combining qualitative data from the chromatographic structure of 2-D gas chromatography with flame ionization detection (GC×GC-FID) and that from gas chromatography-mass spectrometry (GC/MS) should result in a more accurate assignment of the peak identities than the simple analysis by GC/MS, where coelution of analytes is unavoidable in highly complex samples (rendering spectra unsuitable for qualitative purposes) or for compounds in very low concentrations. Using data from GC×GC-FID combined with GC/MS can reveal coelutions that were not detected by mass spectra deconvolution software. In addition, some compounds can be identified according to the structure of the GC×GC-FID chromatogram. In this article, the volatile fractions of fresh and dehydrated pineapple pulp were evaluated. The extraction of the volatiles was performed by dynamic headspace extraction coupled to solid-phase microextraction (DHS-SPME), a technique appropriate for slurries or solid matrices. Extracted analytes were then analyzed by GC×GC-FID and GC/MS. The results obtained using both techniques were combined to improve compound identifications.     

Poly[di‐μ‐aqua‐[μ6‐N‐(4‐bromophenylsulfonyl)dithiocarbimato]dipotassium] and poly[di‐μ‐aqua‐[μ4‐N‐(4‐iodophenylsulfonyl)dithiocarbimato]dipotassium]

The rigid organic linkers N‐(4‐bromophenylsulfonyl)dithiocarbimate(2−) and N‐(4‐iodophenylsulfonyl)dithiocarbimate(2−) crystallize with two potassium cations and two water molecules in their asymmetric units, forming the title coordination polymers, [K₂(C₇H₄BrNO₂S₃)(H₂O)₂]_n and [K₂(C₇H₄INO₂S₃)(H₂O)₂]_n. The anions and the water molecules link the potassium cations into broad two‐dimensional networks, which are further linked by K...halide interactions.     

Chemical constituents of the bark of Dipteryx alata vogel, an active species against Bothrops jararacussu venom

The effect of four sub-extracts prepared from the lyophilized hydroalcoholic bark of Dipteryx alata (Leguminosae-Papilionoideae) dissolved in a methanol-water (80:20) mixture through a liquid-liquid partition procedure has been investigated against the neuromuscular blockade of the venom of the snake Bothrops jararacussu. The active CH?Cl? sub-extract has been extensively analyzed for its chemical constituents, resulting in the isolation of four lupane-type triterpenoids: lupeol, lupenone, 28-hydroxylup-20(29)-en-3-one, betulin, nine isoflavonoids: 8-O-methylretusin, 7-hydroxy-5,6,4'-trimethoxyisoflavone, afrormosin, 7-hydroxy-8,3',4'-trimethoxyisoflavone, 7,3'-dihydroxy-8,4'-dimethoxyisoflavone, odoratin, 7,8,3'-trihydroxy-4'-methoxyisoflavone, 7,8,3'-trihydroxy-6,4'-dimethoxyisoflavone, dipteryxin, one chalcone: isoliquiritigenin, one aurone: sulfuretin and three phenolic compounds: vanillic acid, vanillin, and protocatechuic acid. Their chemical structures were elucidated on the basis of spectroscopic analysis, including HRMS, 1D- and 2D-NMR techniques.     

Synthesis of new fluorous modular chiral ligand derivatives from amino alcohols and application in enantioselective carbon–carbon bond-forming alkylation reactions

N-Trifluoracyl β-chalcogeno amides and N-perfluoracyl β-thio amide ligands were prepared by a simple and efficient reaction sequence. These new ligands were evaluated in palladium-catalyzed alkylation of rac-(E)-1,3-diphenyl-2-propenyl acetate in the presence of dimethyl malonate and an enantioselectivity of up to 99% was obtained. After catalysis, the fluorous ligand can be easily recovered by liquid–liquid extraction and reused without loss in the activity.     

Bulk hydrosilylation reaction of poly(dimethylsiloxane) chains catalyzed by a platinum salt: Effect of the initial concentration of reactive groups on the final extent of reaction

Model silicone networks obtained by curing linear poly(dimethylsiloxane) (PDMS) chains with end‐vinyl groups, (B₂), with a polyfunctional silane‐terminated crosslinker of functionality f, (A_f), through a hydrosilylation reaction have been widely used. In these networks, the principal characteristics of their ultimate molecular structure are strongly affected by the final extent of reaction reached during the crosslinking reaction. This work analyzes the effect of the initial concentration of the reactive end groups on the maximum attainable extent of reaction under normal bulk crosslinking conditions. This was accomplished by examining the reaction between linear B₂ PDMS chains with difunctional and trifunctional silanes. The experimental results were fitted by an exponential equation to have an empirical equation able to predict the maximum extent of reaction to be obtained as a function of the initial concentration of reactive groups. Molecular parameters relevant to this study, such as the degree of polymerization, the weight‐average molecular weight for the A₂ + B₂ system, or the weight fraction of solubles for the A₃ + B₂ system, were calculated with a mean field theory (recursive approach). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1099–1106, 2003