From Levulinic Acid to Biheterocycles: Synthesis of 1-[(5-Hydroxy-5-trifluoromethyl-3-substituted-4,5-dihydro-1H-pyrazol-1-yl)-3-(5-trifluoromethyl-1H-pyrazol-3-yl)propan-1-ones

We develop an efficient method to synthesize novel propionyl-spaced bisheterocyclic compounds. It entails cyclocondensation of 3-(5-trifluoromethyl-1H-pyrazol-3-yl)propanoyl hydrazide obtained from levulinic acid, with 1,1,1-trifluoro-4-methoxy-3-alken-2-ones proceeding regiospecifically to 1-[(5-trifluoromethyl-5-hydroxy-3-substituted-4,5-dihydro-1H-pyrazol-1-yl)-3-(5-trifluoromethyl-1H-pyrazol-3-yl)propan-1-one derivatives.     

Synthesis,Crystal Structures,and in Silico Toxicity Prediction of Thienopyridine Phosphoramidates

New thieno[2,3-b]pyridine phosphoramidates compounds were synthesized and characterized by infrared; ¹H, ¹³C, and ³¹P NMR spectroscopy; and high-resolution mass spectrometry. The products were obtained in good yields (64–82%) under mild conditions by nucleophilic aromatic substitution reaction of aminoalkylphosphoramidates over 4-chlorothieno[2,3-b]pyridine-5-carbonitrile. The crystal structures of two compounds were solved by x-ray diffraction and showed a network of intermolecular interactions involving phosphoramidate groups. Druglike properties and toxicity of the new compounds were studied with the help of the software Molinspiration, Osiris, and Toxtree, and were compared with the standard drugs amphotericin B, miltefosine, benznidazole, and nifurtimox.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Synthesis of New Tetrazole Derivatives of α,α‐Trehalose

Five new nitrogen heterocycles, mono‐and disubstituted tetrazoles with potential synthetic and pharmacological interest, were synthesized from α, α‐trehalose via the alkylation of commercial tetrazoles. This method appears to have broad scope with respect to the variations at positions 1 and 2 of tetrazole.     

Probing the Charge Transfer in a Frustrated Lewis Pair by Resonance Raman Spectroscopy and DFT Calculations

A classical Lewis adduct derives from a covalent bond between a Lewis acid and a base. When the adduct formation is precluded by means of steric hindrance the association of the respective acid-base molecular system is defined as a frustrated Lewis pair (FLP). In this work, the archetypal FLP Mes₃P/B(C₆F₅)₃ was characterized for the first time by resonance Raman spectroscopy, and the results were supported by density functional theory (DFT) calculations. The charge transfer nature of the lowest energy electronic transition, from phosphine to borane, was confirmed by the selective enhancement of the Raman bands associated to the FLP chromophore at resonance condition. Herein, we demonstrate the use of resonance Raman spectroscopy as a distinguished technique to probe the weak interaction involved in FLP chemistry.     

Growth and Atomic-Scale Characterization of Ultrathin Silica and Germania Films: The Crucial Role of the Metal Support

The present review reports on the preparation and atomic-scale characterization of the thinnest possible films of the glass-forming materials silica and germania. To this end state-of-the-art surface science techniques, in particular scanning probe microscopy, and density functional theory calculations have been employed. The investigated films range from monolayer to bilayer coverage where both, the crystalline and the amorphous films, contain characteristic XO₄ (X=Si,Ge) building blocks. A side-by-side comparison of silica and germania monolayer, zigzag phase and bilayer films supported on Mo(112), Ru(0001), Pt(111), and Au(111) leads to a more general comprehension of the network structure of glass former materials. This allows us to understand the crucial role of the metal support for the pathway from crystalline to amorphous ultrathin film growth.     

Physico-chemical and anatomical characterization of residual lignocellulosic fibers

Anatomical and physico-chemical properties of residual natural fibers (sugarcane bagasse, coconut fibers and peanut hulls) were characterized in order to evaluate their potential for use in the production of particleboard. The bulk density was determined by helium pycnometer and the chemical characteristics by using an electronic pH meter (for pH determination) on fibers dissolved in acidic and neutral detergents (to determine the levels of cellulose, hemicellulose and lignin). The anatomical characteristics were established using scanning electron microscopy coupled with an X-ray detector system, as well as energy dispersive X-ray spectroscopy. Results indicated similarities and differences between physico-chemical and anatomical characteristics of the residual lignocellulosic fibers when compared with the Pinus sp. wood commercially employed in particleboard production. Bulk density and pH for residual lignocellulosic fibers and Pinus sp. wood presented analogous values. Similar amounts of cellulose and lignin were identified between waste fibers and Pinus sp. wood. The presence of silica was identified in coconut fiber, peanut hull and sugarcane bagasse waste fibers, and may affect the mechanical characteristics of panels. Coconut and sugarcane bagasse fibers show surface pores with diameters ranging from 1.2 to 2.1 μm, below the 5 μm identified for Pinus sp. wood. Both fibers present pores distributed over their entire surface, whereas peanut hull fibers have no pores on their surface. This characteristic contributes to resin dispersion among particles, reflecting positively on the physical–mechanical properties of the panels. Particleboards produced with residual lignocellulosic fibers present similar physical–mechanical properties to those of Pinus sp. wood panels.     

Characterization of Biocatalysts Prepared with Thermomyces lanuginosus Lipase and Different Silica Precursors,Dried using Aerogel and Xerogel Techniques

The use of lipases in industrial processes can result in products with high levels of purity and at the same time reduce pollutant generation and improve both selectivity and yields. In this work, lipase from Thermomyces lanuginosus was immobilized using two different techniques. The first involves the hydrolysis/polycondensation of a silica precursor (tetramethoxysilane (TMOS)) at neutral pH and ambient temperature, and the second one uses tetraethoxysilane (TEOS) as the silica precursor, involving the hydrolysis and polycondensation of the alkoxide in appropriate solvents. After immobilization, the enzymatic preparations were dried using the aerogel and xerogel techniques and then characterized in terms of their hydrolytic activities using a titrimetric method with olive oil and by the formation of 2-phenylethyl acetate in a transesterification reaction. The morphological properties of the materials were characterized using scanning electron microscopy, measurements of the surface area and pore size and volume, thermogravimetric analysis, and exploratory differential calorimetry. The results of the work indicate that the use of different silica precursors (TEOS or TMOS) and different drying techniques (aerogel or xerogel) can significantly affect the properties of the resulting biocatalyst. Drying with supercritical CO₂ provided higher enzymatic activities and pore sizes and was therefore preferable to drying, using the xerogel technique. Thermogravimetric analysis and differential scanning calorimetry analyses revealed differences in behavior between the two biocatalyst preparations due to the compounds present.     

Production and Characterization of β-Glucanase Secreted by the Yeast Kluyveromyces marxianus

An extracellular β-glucanase secreted by Kluyveromyces marxianus was identified for the first time. The optimal conditions for the production of this enzyme were evaluated by response surface methodology. The optimal conditions to produce β-glucanase were a glucose concentration of 4 % (w/v), a pH of 5.5, and an incubation temperature of 35 °C. Response surface methodology was also used to determine the pH and temperature required for the optimal enzymatic activity. The highest enzyme activity was obtained at a pH of 5.5 and a temperature of 55 °C. Furthermore, the enzyme was partially purified and sequenced, and its specificity for different substrates was evaluated. The results suggest that the enzyme is an endo-β-1,3(4)-glucanase. After optimizing the conditions for β-glucanase production, the culture supernatant was found to be effective in digesting the cell wall of the yeast Saccharomyces cerevisiae, showing the great potential of β-glucanase in the biotechnological production of soluble β-glucan.