Synthesis and antifolate activity of 8,10-dideazaminopterin

A synthesis of 8,10-dideazaminopterin, using 2,4-diamino-6-bromomethyl-8-deazapteridine ( 2 ) as a key intermediate, is described. Condensation of the triphenylphosphinylide derived from 2 with p-formylbenzoyl-L-glutamate afforded a 9,10-dehydro-8,10-dideazaminopterin ester intermediate 5 . Hydrogenation of the olefinic linkage and subsequent hydrolysis of the glutamate ester gave the title compound. 8,10-Dideazaminopterin was a potent growth inhibitor of folate dependent bacteria. It was 16 times more potent then methotrexate as an inhibitor of dihydrofolate reductase derived from L1210 leukemia cells, and showed strong activity against L1210 in mice.     

Multitechnique surface spectroscopic studies of plasma modified polymers III. H2O and O2/H2O plasma modified poly(methyl methacrylate)s

The surfaces of poly(methyl methacrylate) (PMMA) films modified by O₂H₂O and H₂O radio-frequency glow discharge plasmas were studied using electron spectroscopy for chemical analysis (ESCA or XPS), low energy ion scattering (LEISS or ISS), Fourier transform IR spectroscopy (FTIR) with attenuated total reflectance (ATR) sampling, and critical surface energy from contact angle measurements. The extent and nature of modification with respect to promotion of a hydrophilic surface compared to the hydrophobic surface of the unmodified PMMA has been probed. Results show drastic decreases in C/O ratio at the near surface, which increases to that of the unmodified PMMA as deeper cross sections are analyzed. In addition peak fitting of ESCA data correlated with FTIR functional group information allows for the qualitative and quantitative analysis of the resulting bonding and structure of the modified layer. From these results combined with the polarity and surface energy differences obtained from contact angle measurements, the structural changes are discussed with respect to plasma reaction mechanisms and differences in the structure of the modified polymer films.     

Measurement and modeling of the glass transition temperatures of multi-component solutions

Protein crystals are usually grown in multi-component aqueous solutions containing salts, buffers and other additives. To measure the X-ray diffraction data of the crystal, crystals are rapidly lowered to cryogenic temperatures. On flash cooling, ice frequently forms affecting the integrity of the sample. In order to eliminate this effect, substances called cryoprotectants are added to produce a glassy (vitrified) state rather than ice. Heretofore, the quantity of cryoprotectant needed to vitrify the sample has largely been established by trial and error. In this study, differential scanning calorimetry (DSC) was used to measure the melting (T_m), devitrification (T_d) and glass transition (T_g) temperatures of solutions with a range of compositions typical of those used for growing protein crystals, with the addition of glycerol as cryoprotectant. The addition of cryoprotectant raises the T_g and lowers the T_m of bulk solution thereby decreasing the cooling rates required for vitrification of protein crystals. The theoretical T_g value was calculated using the apparent volume fraction using the Miller/Fox equation extended for multi-component systems. The experimental values of T_g were within approximately ±4% of that predicted by the model. Thus, the use of the model holds the promise of a rational method for the theoretical determination of the composition of cryoprotectant requirement of protein crystallization solutions.     

Studies on some oxovanadium(IV) complexes of acyl pyrazolone analogues

A series of novel bidentate pyrazolone based Schiff base ligands were synthesized by interaction of 4-benzoyl-3-methyl-1-(4′-methylphenyl)-2-pyrazolin-5-one with various aromatic amines like aniline, o-,m-,p-chloroaniline and o-,m-,p-toluidine in a ethanolic medium. All of these ligands have been characterized on the basis of elemental analysis, IR and ¹H NMR data. The molecular geometries of five of these ligands have been determined by single crystal X-ray study. Crystallographic study reveals that these ligands exist in the amine-one tautomeric form in the solid state. NMR study also suggests the existence of the amine-one form in solution at room temperature. Ab initio calculations for representative ligand HL¹ has been carried out to know the coordination site of the ligand. Novel vanadium Schiff base complexes of these ligands with general formula [OV(L^1–7)₂(H₂O)] have been prepared by interaction of aqueous solution of vanadyl sulfate pentahydrate with DMF solution of the appropriate ligands. The resulting complexes have been characterized on the basis of elemental analysis, vanadium determination, molar conductance and magnetic measurements, thermo gravimetric analysis, infrared and electronic spectral studies. Suitable distorted octahedral structures have been proposed for these complexes.     

A density functional study on a biomimetic non-heme iron catalyst: insights into alkane hydroxylation by a formally HO-FeV=O oxidant

The reactivity of [HO-(tpa)Fe(V)=O] (TPA=tris(2-pyridylmethyl)amine), derived from O-O bond heterolysis of its [H(2)O-(tpa)Fe(III)-OOH] precursor, was explored by means of hybrid density functional theory. The mechanism for alkane hydroxylation by the high-valent iron-oxo species invoked as an intermediate in Fe(tpa)/H(2)O(2) catalysis was investigated. Hydroxylation of methane and propane by HO-Fe(V)=O was studied by following the rebound mechanism associated with the heme center of cytochrome P450, and it is demonstrated that this species is capable of stereospecific alkane hydroxylation. The mechanism proposed for alkane hydroxylation by HO-Fe(V)=O accounts for the experimentally observed incorporation of solvent water into the products. An investigation of the possible hydroxylation of acetonitrile (i.e., the solvent used in the experiments) shows that the activation energy for hydrogen-atom abstraction by HO-Fe(V)=O is rather high and, in fact, rather similar to that of methane, despite the similarity of the H-CH(2)CN bond strength to that of the secondary C-H bond in propane. This result indicates that the kinetics of hydrogen-atom abstraction are strongly affected by the cyano group and rationalizes the lack of experimental evidence for solvent hydroxylation in competition with that of substrates such as cyclohexane.     

Importance of micellar kinetics in relation to technological processes

The association of many classes of surface-active molecules into micellar aggregates is a well-known phenomenon. Micelles are in dynamic equilibrium, constantly disintegrating and reforming. This relaxation process is characterized by the slow micellar relaxation time constant, tau(2), which is directly related to the micellar stability. Theories of the kinetics of micelle formation and disintegration have been discussed to identify the gaps in our complete understanding of this kinetic process. The micellar stability of sodium dodecyl sulfate micelles has been shown to significantly influence technological processes involving a rapid increase in interfacial area, such as foaming, wetting, emulsification, solubilization, and detergency. First, the available monomers adsorb onto the freshly created interface. Then, additional monomers must be provided by the breakup of micelles. Especially when the free monomer concentration is low, which is the case for many nonionic surfactant solutions, the micellar breakup time is a rate-limiting step in the supply of monomers. The Center for Surface Science & Engineering at the University of Florida has developed methods using stopped flow and pressure jump with optical detection to determine the slow relaxation time of micelles of nonionic surfactants. The results showed that the ionic surfactants such as SDS exhibit slow relaxation times in the range from milliseconds to seconds, whereas nonionic surfactants exhibit slow relaxation times in the range from seconds (for Triton X-100) to minutes (for polyoxyethylene alkyl ethers). The slow relaxation times are much longer for nonionic surfactants than for ionic surfactants, because of the absence of ionic repulsion between the head groups. The observed relaxation times showed a direct correlation with dynamic surface tension and foaming experiments. In conclusion, relaxation time data of surfactant solutions correlate with the dynamic properties of the micellar solutions. Moreover, the results suggest that appropriate micelles with specific stability or tau(2) can be designed by controlling the surfactant structure, concentration, and physicochemical conditions (e.g., salt concentration, temperature, and pressure). One can also tailor micelles by mixing anionic/cationic or ionic/nonionic surfactants for a desired stability to control various technological processes.     

Co-activation of Gi and Gq proteins exerts synergistic effect on human platelet aggregation through activation of phospholipase C and Ca2+ signalling pathways

Our previous studies have shown that subthreshold concentrations of two platelet agonists exert synergistic effects on platelet aggregation. Here we studied the mechanism of synergistic interaction of 5-hydroxytryptamine (5-HT) and epinephrine mediated platelet aggregation. We show that 5-HT had no or little effect on aggregation but it did potentiate the aggregation response of epinephrine. The synergistic interaction of 5-HT (1-5 microM) and epinephrine (0.5-2 microM) was inhibited by alpha2-adrenoceptor blocker (yohimbine; IC50= 0.4 microM), calcium channel blockers (verapamil and diltiazem with IC50 of 10 and 48 mM, respectively), PLC inhibitor (U73122; IC50=6 microM) and nitric oxide (NO) donor, SNAP (IC50=1.6 microM)). The data suggest that synergistic effects of platelet agonists are receptor-mediated and occur through multiple signalling pathways including the activation PLC/Ca2+ signalling cascades.     

Salvinicins A and B, new neoclerodane diterpenes from Salvia divinorum

[reaction: see text] Two new neoclerodane diterpenes, salvinicins A (4) and B (5), were isolated from the dried leaves of Salvia divinorum. The structures of these compounds were elucidated by spectroscopic techniques, including (1)H and (13)C NMR, NOESY, HMQC, and HMBC. The absolute stereochemistry of these compounds was assigned on the basis of single-crystal X-ray crystallographic analysis of salvinicin A (4) and a 3,4-dichlorobenzoate derivative of salvinorin B.     

Supramolecular assemblies of a naturally derived sophorolipid

Acidic sophorolipid (SL) molecules derived from yeasts represent a novel type of asymmetrical bolaamphiphiles due to their unique structural features that include an asymmetrical polar head size (disaccharide vs COOH), a kinked hydrophobic core (cis-9-octadecenoic chain), and a non-amide polar-nonpolar linkage. Light microscopy, small- and wide-angle X-ray scattering, FT-IR spectroscopy, and dynamic laser light scattering were used to investigate the supramolecular structures of the self-assembled aggregates of SL molecules at different pH values. In acidic conditions (pH < 5.5), giant twisted and helical ribbons of 5-11 microm width and several hundreds of micrometers length were observed for the first time. Increase in solution pH values slowed ribbon formation, decreased ribbon yield, and increased the helicity and entanglements of the giant ribbons. An interdigitated lamellar packing model of acidic SL-COOH molecules with a long period of 2.78 nm, stabilized by both the strong hydrophobic association between the cis-9-octadecenoic chains and strong disaccharide-disaccharide hydrogen bonding, is proposed. The neutralization of SL-COOH in water to SL-COONa produced clear solutions with the formation of short-range ordered aggregates. At concentrations below 1.0 mg/mL, the size of self-assembled aggregates increased as the concentration increased. At concentrations above 1.0 mg/mL, narrowly distributed micellar aggregates with a constant hydrodynamic radius (R(h)) of about 100 nm are formed. The large micelles show strong angular dependence with the fast mode appearing at scattering angle theta >/= 60 degrees.     

Anodic stripping voltammetry of sulphide at a nickel film: towards the development of a reagentless sensor

The determination of sulphide at an electrochemically generated nickel oxide layer at glassy carbon and screen-printed electrodes in acidic media has been examined and appraised. The NiO layer was found to produce a stripping-like signal to sulphide and gave a linear peak current response from 20 to 90 μM. The response was further enhanced by repetitive cycling allowing accumulation of nickel sulphide at the electrode surface such that lower micromolar levels of sulphide (i.e. 5 μM) can be determined. The response at the NiO layer to sulphide is shown to be reproducible over a period of 24 h, thereby offering the development of a disposable amperometric sensor for sulphide.