Stochastic coupling and thermodynamic inequalities

Let ₁ and ₂ be thermodynamic Gibbs measures on ^m and ⁿ , respectively. Diffusions are constructed having ₁, and ₂ as invariant measures. These diffusions are then coupled; inequalities between expectations of certain random variables on the two spaces result.Partially supported by NSF-MCS 74-07313-A03     

THE EXCITATION OF 8-METHOXYPSORALEN WITH VISIBLE LIGHT: REVERSED PHASE HPLC QUANTITATION OF MONOADDUCTS and CROSS-LINKS

Abstract— The formation of 8-methoxypsoralen-DNA monoadducts and cross-links is presumed to be responsible for the efficacy of photochemotherapies that employ 8-methoxypsoralen activated with long-wavelength ultraviolet radiation (UVA,320–400 nm). In this report it is shown that 8-methoxypsoralen can also be activated with visible light (419 nm). Bovine aorta smooth muscle cells were treated with 8-methoxypsoralen (1000 ng/mL) and 419 nm light (up to 12 J/cm²). Cellular DNA was isolated, hydrolyzed using nucleolytic enzymes and then analyzed by reversed-phase high-performance liquid chromatography. The primary effect of using visible light instead of long-wavelength ultraviolet radiation is a more than 10-fold reduction in the extent of cross-link formation. Because the extent of monoadduct and cross-link formation has not been routinely measured in experiments in which cellular assays have been performed, it is difficult to correlate cell response to the presence of a particular type of 8-methoxypsoralen photoadduct (monoadduct or cross-link). Thus, the use of visible light allows the study of cells containing nearly 100% monoadducts. In addition, the reduction in cross-link formation when visible light is used to activate the compound may also reduce the mutagenicity of 8-methoxypsoralen and hence enhance its therapeutic efficacy.     

Degenerative transfer living Ziegler-Natta polymerization: application to the synthesis of monomodal stereoblock polyolefins of narrow polydispersity and tunable block length

The neutral dimethyl pentamethylcyclopentadienylzirconium acetamidinate, (eta(5)-C(5)Me(5))ZrMe(2)[N(t-Bu)C(Me)N(Et)], can serve as a highly active initiator for the living Ziegler-Natta polymerization of alpha-olefins to produce polyolefins of narrow polydispersity (D < or = 1.05) when "activated" through mono demethylation by a substoichiometric amount of the borate, [PhNMe(2)H][B(C(6)F(5))(4)]. The mechanism by which this living polymerization proceeds is through a process of degenerative transfer involving rapid and reversible methyl group exchange between cationic (active) zirconium propagating centers and neutral (dormant) methyl, polymeryl zirconium end groups. Facile metal-centered epimerization of the dormant species is responsible for a loss of stereocontrol during propagation that produces iso-rich material in contrast to the pure isotactic polymer microstructure obtained when degenerative transfer is not present. By turning degenerative transfer "on" and "off" between successive monomer polymerizations, a successful strategy for the production of monomodal stereoblock polyolefins of narrow polydispersity and tunable block length has been demonstrated.     

The influence of activated carbon on the thermal decomposition of sodium ethyl xanthate

The thermal decomposition of SEX in a nitrogen atmosphere was studied by coupled thermogravimetry-Fourier transform infrared spectroscopy (TG-FTIR), and by pyrolysis-gas chromatography-mass spectrometry (py-GC-MS). The TG curve exhibited two discrete mass losses of 45.8% and 17.8% respectively, at 200 and 257–364°C. The evolved gases identified as a result of the first mass loss were carbonyl sulfide (COS), ethanol (C₂H₅OH), ethanethiol (C₂H₅SH), carbon disulfide (CS₂), diethyl sulfide ((C₂H₅)₂S), diethyl carbonate ((C₂H₅O)₂CO), diethyl disulfide ((C₂H₅)₂S₂), and carbonothioic acid, O, S, diethyl ester ((C₂H₅S)(C₂H₅O)CO). The gases identified as a result of the second mass loss were carbonyl sulfide, ethanethiol, and carbon disulfide. Hydrogen sulfide was detected in both mass losses by py-GC-MS, but not detected by FTIR. The solid residue was sodium hydrogen sulfide (NaSH).SEX was adsorbed onto activated carbon, and heated in nitrogen. Two discrete mass losses were still observed, but in the temperature ranges 100–186°C (7.8%) and 186–279°C (11.8%). Carbonyl sulfide and carbon disulfide were now the dominant gases evolved in each of the mass losses, and the other gaseous products were relatively minor. It was demonstrated that water adsorbed on the carbon hydrolysed the xanthate to cause the first mass loss, and any unhydrolysed material decomposed to give the second mass loss.Mr. N. G. Fisher would like to thank the A. J. Parker CRC for Hydrometallurgy for the provision of a PhD scholarship.     

Gravimetric determination of osmium with 1:2:3-benzotriazole

A method for the direct gravimetric determination of osmium with 1:2:3-benzotriazole in acetic acid-sodium acetate buffer is presented. The method is accurate and reproducible, and the conditions used in the determination are not critical. The precipitate is a stoichiometric compound which is stable from room temperature up to 200°. It appears that 1:2:3-benzotriazole is probably the first organic reagent to be used successfully in the direct gravimetric determination of osmium.     

Quantification of clenbuterol in equine plasma,urine and tissue by liquid chromatography coupled on-line with quadrupole time-of-flight mass spectrometry

Clenbuterol (CBL) is a potent beta(2)-adrenoceptor agonist used for the management of respiratory disorders in the horse. The detection and quantification of CBL can pose a problem due to its potency, the relatively low dose administered to the horse, its slow clearance and low plasma concentrations. Thus, a sensitive method for the quantification and confirmation of CBL in racehorses is required to study its distribution and elimination. A sensitive and fast method was developed for quantification and confirmation of the presence of CBL in equine plasma, urine and tissue samples. The method involved liquid-liquid extraction (LLE), separation by liquid chromatography (LC) on a short cyano column, and pseudo multiple reaction monitoring (pseudo-MRM) by electrospray ionization quadrupole time-of-flight tandem mass spectrometry (ESI-QTOF-MS/MS). At very low concentrations (picograms of CBL/mL), LLE produced better extraction efficiency and calibration curves than solid-phase extraction (SPE). The operating parameters for electrospray QTOF and yield of the product ion in MRM were optimized to enhance sensitivity for the detection and quantification of CBL. The quantification range of the method was 0.013-10 ng of CBL/mL plasma, 0.05-20 ng/0.1 mL of urine, and 0.025-10 ng/g tissue. The detection limit of the method was 13 pg/mL of plasma, 50 pg/0.1 mL of urine, and 25 pg/g of tissue. The method was successfully applied to the analysis of CBL in plasma, urine and various tissue samples, and in pharmacokinetic (PK) studies of CBL in the horse. CBL was quantified for 96 h in plasma and 288 h in urine post-administration of CLB (1.6 micro g/kg, 2 x daily x 7 days). This method is useful for the detection and quantification of very low concentrations of CBL in urine, plasma and tissue samples.     

ELECTRON TRANSFER FROM CHLOROPHYLL a TO QUINONE IN MONO- AND MULTILAYER ARRAYS

Abstract— Mono- and multilayers of chlorophyll a (Chl a )– lecithin have been prepared on quartz slides, by means of the Blodgett-Langmuir technique, for fluorescence studies. Self-quenching of the Chl a fluorescence has been observed in Chl a -lecithin single layer excited with a laser light at 632.8 nm. The fluorescence yield is reduced by 50% at a concentration of 7 ± 10¹² Chl a molecules cm⁻². Chl a fluorescence quenching, by adding N,N -distearoyl-1,4-diaminoanthraquinone (SAQ), has been studied. in a single layer, in pure Chl a and also at various dilutions of Chl a in lecithin. The results are explained in terms of a dynamic quenching rather than in terms of a permanent complex formation, at the ground state, between Chl a and SAQ. The fluorescence quenching has been interpreted as the result of an electron transfer from excited Chl a to SAQ, and rate constants of 8.3 ± 10⁻⁵ cm² molecule⁻¹ S⁻¹ and 2.4 ± 10⁻⁴ cm² molecule⁻¹ s⁻¹ have been found for pure diluted Chl a , respectively. Ten per cent of the diluted Chl a fluorescence always remains unquenchable and independent of the quinone concentration. In multilayers, where SAQ and Chl a are in different layers, there is no fluorescence quenching for pure or diluted Chl a even when the chromophores are in two adjacent layers. This happens only if SAQ is not able to diffuse from one layer to another. A minimum value of 22.4 nm has been found for the singlet exciton diffusion length in pure Chl a multilayers.     

Surfactant control of gas uptake: effect of butanol films on HCl and HBr entry into supercooled sulfuric acid

The entry of HCl into 60-68 wt % D(2)SO(4) and HBr into 68 wt % acid containing 0-0.18 M 1-butanol was monitored by measuring the fractions of impinging HCl and HBr molecules that desorb as DCl and DBr after undergoing H --> D exchange within the deuterated acid. The addition of 0.18 M butanol to the acid creates butyl films that reach approximately 80% surface coverage at 213 K. Surprisingly, this butyl film does not impede exchange but instead enhances it: the HCl --> DCl exchange fractions increase from 0.52 to 0.74 for 60 wt % D(2)SO(4) and from 0.14 to 0.27 for 68 wt % D(2)SO(4). HBr --> DBr exchange increases even more sharply, rising from 0.22 to 0.65 for 68 wt % D(2)SO(4). We demonstrate that this enhanced exchange corresponds to enhanced uptake into the butyl-coated acid for HBr and infer this equivalence for HCl. In contrast, the entry probability of the basic molecule CF(3)CH(2)OH exceeds 0.85 at all acid concentrations and is only slightly diminished by the butyl film. The OD groups of surface butanol molecules may assist entry by providing extra interfacial protonation sites for HCl and HBr dissociation. The experiments suggest that short-chain surfactants in sulfuric acid aerosols do not hinder heterogeneous reactions of HCl or HBr with other solute species.     

Electrochemical detection of amino acids at carbon nanotube and nickel-carbon nanotube modified electrodes

The oxidation and enhanced detection of traditionally 'non-electroactive' amino acids at a single-wall carbon nanotube (SWNT) surface and at a nickel hydroxide film electrochemically deposited and generated upon the SWNT layer is reported. Different CNT are compared, with Nafion-dispersed SWNT offering the most favorable layer for constant-potential amperometric detection. Factors affecting the oxidation process, including the pH or applied potential, are assessed. The response of the SWNT-Nafion coated electrode compares favorably with that of copper and nickel disk electrodes under flow injection analysis (FIA) conditions. The electrodeposition of nickel onto the SWNT-Nafion layer (Ni-CNT) led to a dramatic enhancement of the analytical response (vs. that observed at the SWNT or nickel electrodes alone). The oxidative process at the Ni(OH)(2) layer has been studied and the increase in sensitivity rationalized. In the presence of amino acid the Ni-CNT layer undergoes an electrocatalytic process in which the amino acid reduces the newly formed NiO(OH) species. Furthermore, the attractive response of both the CNT and Ni-CNT layers has allowed these electrodes to be used for constant-potential FIA of various amino acids and indicates great promise for monitoring chromatographic effluents. Once again an improved signal was observed at the Ni-CNT electrode compared to nickel deposited upon a bare glassy carbon electrode (Ni-GC).