On the Electronic Structure and Photochemistry of Coordinatively Unsaturated Complexes: The Case of Nickel Bis‐dinitrogen,Ni(N2)2

The electronic ground and excited states of the coordinatively unsaturated complex Ni(η¹‐N₂)₂, isolated in an Ar matrix, are analyzed in detail by vibrational and electronic absorption and emission spectroscopies allied with quantum chemical calculations. The bond force constants are determined from a normal coordinate analysis and compared with those of the isoelectronic carbonyl complex. The consequences for the bond properties are discussed, and the trend in the force constants is compared with the standard formation enthalpies. The linear complex Ni(η¹‐N₂)₂ with two terminal dinitrogen ligands can be photoisomerized to two isomeric, metastable forms Ni(η¹‐N₂)(η²‐N₂) and Ni(η²‐N₂)₂, with one and two side‐on coordinated dinitrogen ligands, respectively.     

Functionalization of a Ruthenium–Diacetylide Organometallic Complex as a Next‐Generation Push–Pull Chromophore

The design and preparation of an asymmetric ruthenium–diacetylide organometallic complex was successfully achieved to provide an original donor–π–[M]–π–acceptor architecture, in which [M] corresponds to the [Ru(dppe)₂] (dppe: bisdiphenylphosphinoethane) metal fragment. The charge‐transfer processes occurring upon photoexcitation of the push–pull metal–dialkynyl σ complex were investigated by combining experimental and theoretical data. The novel push–pull complex, appropriately end capped with an anchoring carboxylic acid function, was further adsorbed onto a semiconducting metal oxide porous thin film to serve as a photosensitizer in hybrid solar cells. The resulting photoactive material, when embedded in dye‐sensitized solar cell devices, showed a good spectral response with a broad incident photon‐to‐current conversion efficiency profile and a power conversion efficiency that reached 7.3 %. Thus, this material paves the way to a new generation of organometallic chromophores for photovoltaic applications.     

A Cationic Zinc Hydride Cluster Stabilized by an N‐Heterocyclic Carbene: Synthesis,Reactivity, and Hydrosilylation Catalysis

The trinuclear cationic zinc hydride cluster [(IMes)₃Zn₃H₄(THF)](BPh₄)₂ ( 1 ) was obtained either by protonation of the neutral zinc dihydride [(IMes)ZnH₂]₂ with a Brønsted acid or by addition of the putative zinc dication [(IMes)Zn(THF)]²⁺. A triply bridged thiophenolato complex 2 was formed upon oxidation of 1 with PhS? SPh. Protonolysis of 1 by methanol or water gave the corresponding trinuclear dicationic derivatives. At ambient temperature, 1 catalyzed the hydrosilylation of aldehydes, ketones, and nitriles. Carbon dioxide was also hydrosilylated under forcing conditions when using (EtO)₃SiH, giving silylformate as the main product.     

Alkali Metal Triphenyl- and Trihydridosilanides Stabilized by a Macrocyclic Polyamine Ligand

Potassium silanide [KSiH₃]_∞ contains 4.2 wt % of hydrogen and has been intensely studied as hydrogen storage material. The macrocyclic ligand Me₄TACD (1,4,7,10-tetramethyl-1,4,7,10-tetraaminocyclododecane, L ) stabilizes the full range of triphenylsilyl complexes [( L )MSiPh₃]_n (M=Li–Cs), which react with H₂ or PhSiH₃ to form molecular [( L )MSiH₃]_n that can be isolated in soluble form and fully characterized.     

Hydrogen Isotope Exchange Catalyzed by Ru Nanocatalysts: Labelling of Complex Molecules Containing N-Heterocycles and Reaction Mechanism Insights

Ruthenium nanocatalysis can provide effective deuteration and tritiation of oxazole, imidazole, triazole and carbazole substructures in complex molecules using D₂ or T₂ gas as isotopic sources. Depending on the substructure considered, this approach does not only represent a significant step forward in practice, with notably higher isotope uptakes, a broader substrate scope and a higher solvent applicability compared to existing procedures, but also the unique way to label important heterocycles using hydrogen isotope exchange. In terms of applications, the high incorporation of deuterium atoms, allows the synthesis of internal standards for LC-MS quantification. Moreover, the efficacy of the catalyst permits, even under subatmospheric pressure of T₂ gas, the preparation of complex radiolabeled drugs owning high molar activities. From a fundamental point of view, a detailed DFT-based mechanistic study identifying undisclosed key intermediates, allowed a deeper understanding of C−H (and N−H) activation processes occurring at the surface of metallic nanoclusters.     

Chemo‐ and Magnetotaxis of Self‐Propelled Light‐Emitting Chemo‐electronic Swimmers

Miniaturized autonomous chemo‐electronic swimmers, based on the coupling of spontaneous oxidation and reduction reactions at the two poles of light‐emitting diodes (LEDs), are presented as chemotactic and magnetotactic devices. In homogeneous aqueous media, random motion caused by a bubble‐induced propulsion mechanism is observed. However, in an inhomogeneous environment, the self‐propelled devices exhibit positive chemotactic behavior, propelling themselves along a pH or ionic strength gradient (?pH and ?I, respectively) in order to reach a thermodynamically higher active state. In addition, the intrinsic permanent magnetic moment of the LED allows self‐orientation in the terrestrial magnetic field or following other external magnetic perturbations, which enables a directional motion control coupled with light emission. The interplay between chemotaxis and magnetotaxis allows fine‐tuning of the dynamic behavior of these swimmers.     

Remote Actuation of a Light-Emitting Device Based on Magnetic Stirring and Wireless Electrochemistry

We propose a straightforward access to a rotating light-emitting device powered by wireless electrochemistry. A magnetic stirrer is used to rotate a light-emitting diode (LED) due to the intrinsic magnetic properties of the tips that contain iron. At the same time, the LED is submitted to an electric field and acts as a bipolar electrode. The electrochemical processes that are coupled on both extremities of the LED drive an electron flow across the device, resulting in light emission. The variation of the LED alignment in time enables an alternating light emission that is directly controlled by the rotation rate. The stirring also enables a continuous mixing of the electrolyte that improves the stability of the output signal. Finally, the LED brightness can readily reveal a change of chemical composition in the electrolyte solution.     

Evaluation of Vetiver Volatile Compound Production under Aeroponic-Grown Conditions for the Perfume Industry

Vetiver (Chrysopogon zizanioides (L.) Roberty) is a major tropical perfume crop. Access to its essential oil (EO)-filled roots is nevertheless cumbersome and land-damaging. This study, therefore, evaluated the potential of vetiver cultivation under soilless high-pressure aeroponics (HPA) for volatile organic compound (VOC) production. The VOC accumulation in the roots was investigated by transmission electron microscopy, and the composition of these VOCs was analyzed by gas chromatography coupled with mass spectrometry (GC/MS) after sampling by headspace solid-phase microextraction (HS-SPME). The HPA-grown plants were compared to plants that had been grown in potting soil and under axenic conditions. The HPA-grown plants were stunted, demonstrating less root biomass than the plants that had been grown in potting soil. The roots were slender, thinner, more tapered, and lacked the typical vetiver fragrance. HPA cultivation massively impaired the accumulation of the less-volatile hydrocarbon and oxygenated sesquiterpenes that normally form most of the VOCs. The axenic, tissue-cultured plants followed a similar and more exacerbated trend. Ultrastructural analyses revealed that the HPA conditions altered root ontogeny, whereby the roots contained fewer EO-accumulating cells and hosted fewer and more immature intracellular EO droplets. These preliminary results allowed to conclude that HPA-cultivated vetiver suffers from altered development and root ontology disorders that prevent EO accumulation.     

Antioxidant,Antibacterial and Dyeing Potential of Crude Pigment Extract of Gonatophragmium triuniae and Its Chemical Characterization

Filamentous fungi synthesize natural products as an ecological function. In this study, an interesting indigenous fungus producing orange pigment exogenously was investigated in detail as it possesses additional attributes along with colouring properties. An interesting fungus was isolated from a dicot plant, Maytenus rothiana. After a detailed study, the fungal isolate turned out to be a species of Gonatophragmium belonging to the family Acrospermaceae. Based on the morphological, cultural, and sequence-based phylogenetic analysis, the identity of this fungus was confirmed as Gonatophragmium triuniae. Although this fungus grows moderately, it produces good amounts of pigment on an agar medium. The fermented crude extract isolated from G. triuniae has shown antioxidant activity with an IC₅₀ value of 0.99 mg/mL and antibacterial activity against Gram-positive bacteria (with MIC of 3.91 μg/mL against Bacillus subtilis, and 15.6 μg/mL and 31.25 μg/mL for Staphylococcus aureus and Micrococcus luteus, respectively). Dyeing of cotton fabric mordanted with FeSO₄ using crude pigment was found to be satisfactory based on visual observation, suggesting its possible use in the textile industry. The orange pigment was purified from the crude extract by preparative HP-TLC. In addition, UV-Vis, FTIR, HRMS and NMR (¹H NMR, ¹³C NMR), COSY, and DEPT analyses revealed the orange pigment to be “1,2-dimethoxy-3H-phenoxazin-3-one” (C₁₄H₁₁NO₄, m/z 257). To our understanding, the present study is the first comprehensive report on Gonatophragmium triuniae as a potential pigment producer, reporting “1,2-dimethoxy-3H-phenoxazin-3-one” as the main pigment from the crude hexane extract. Moreover, this is the first study reporting antioxidant, antibacterial, and dyeing potential of crude extract of G. triuniae, suggesting possible potential applications of pigments and other bioactive secondary metabolites of the G. triuniae in textile and pharmaceutical industry.