Role of FTFSI Anion Asymmetry on Physical Properties of AFTFSI (A=Li,Na and K) Based Electrolytes and Consequences on Supercapacitor Application

This study compares the physicochemical properties of six electrolytes comprising of three salts: LiFTFSI, NaFTFSI and KFTFSI in two solvent mixtures, the binary (3EC/7EMC) and the ternary (EC/PC/3DMC). The transport properties (conductivity, viscosity) as a function of temperature and concentration were modeled using the extended Jones-Dole-Kaminsky equation, the Arrhenius model, and the Eyring theory of transition state for activated complexes. Results are discussed in terms of ionicity, solvation shell, and cross-interactions between electrolyte components. The application of the six formulated electrolytes in symmetrical activated carbon (AC)//AC supercapacitors (SCs) was characterized by cyclic voltammetry (CV), galvanostatic cycling with potential limitation (GCPL), electrochemical impedance spectroscopy (EIS) and accelerated aging. Results revealed that the geometrical flexibility of the FTFSI anion allows it to access and diffuse easily in AC whereas its counter ions (Li⁺, Na⁺ or K⁺) can remain trapped in porosity. However, this drawback was partially resolved by mixing LiFTFSI and KFTFSI salts in the electrolyte.     

On the redox reactions between allyl radicals and NOx

NO_x mitigation is a central focus of combustion technologies with increasingly stringent emission regulations. NO_x can also enhance the autoignition of hydrocarbon fuels and can promote soot oxidation. The reaction between allyl radical (C₃H₅) and NO_x plays an important role in the oxidation kinetics of propene. In this work, we measured the absolute rate coefficients for the redox reaction between C₃H₅ and NO_x over the temperature range of 1000–1252 K and pressure range of 1.5–5.0 bar using a shock tube and UV laser absorption technique. We produced C₃H₅ by shock heating of C₃H₅I behind reflected shock waves. Using a Ti:Sapphire laser system with frequency quadrupling, we monitored the kinetics of C₃H₅ at 220 nm. Unlike low-temperature chemistry, the two target reactions, C₃H₅ + NO → products (R1) and C₃H₅ + NO₂ → products (R2), exhibited a strong positive temperature dependence for this radical-radical type reaction. However, these reactions did not show any pressure dependence over the pressure range of 1.5–5.0 bar, indicating that the measured rate coefficients are close to the high-pressure limit. The measured values of the rate coefficients resulted in the following Arrhenius expressions (in unit of cm³/molecule/s):$k_1\left({\mathrm{C}}_3{\mathrm{H}}_5+\text{NO}\right)=1.49\times {10}^{?10}\exp \left(?6083.6\frac{\mathrm{K}}{T}\right)\left(1017?1252K\right)$$k_2\left({\mathrm{C}}_3{\mathrm{H}}_5+\mathrm{N}{\mathrm{O}}_2\right)=1.71\times {10}^{?10}\exp \left(?3675.7\frac{\mathrm{K}}{T}\right)\left(1062?1250K\right)$To our knowledge, these are the first high-temperature measurements of allyl + NO_x reactions. The reported data will be highly useful in understanding the interaction of NO_x with resonantly stabilized radicals as well as the mutual sensitization effect of NO_x on hydrocarbon fuels.     

Differential Graded Bocses and A ∞ $A_{\infty }$ -Modules

Algebras and Representation Theory - We introduce and study the category of twisted modules over a triangular differential graded bocs. We show that in this category idempotents split, that it...     

Non-Hermitian electronics multipods of electromagnetically induced transparency (EIT) and absorption (EIA)

Optical and Quantum Electronics - In the past few decades, the academic research and industrial synergy is dramatically accelerating to conceptualize high data rate services. The congestion in the...     

Collective Tunnelling of Strongly Interacting Cold Atoms in a Double-Well Potential

It is known that under resonance conditions, a group of strongly interacting bosonic atoms, trapped in a double-well potential, mimics a single particle, performing Rabi oscillations between the wells. By implication, all atoms need to tunnel at roughly the same time, even though the Bose–Hubbard Hamiltonian accounts only for one-atom-at-a-time transfers. The mechanism of this collective behavior is analyzed, the Rabi frequencies in the process are evaluated, and the limitation of this simple picture is discussed. In particular, it is shown that the small rapid oscillations superimposed on the slow Rabi cycle result from splitting the transferred cluster at the sudden onset of tunnelling, and disappear if tunnelling is turned on gradually.     

Synthesis of partially fluorinated poly(arylene ether sulfone) multiblock copolymers bearing perfluorosulfonic functions

Partially fluorinated poly(arylene ether sulfone) multiblock copolymers bearing perfluorosulfonic functions (ps‐PES‐FPES), with ionic exchange capacity (IEC) ranging between 0.9 and 1.5 meq H⁺/g, are synthesized by regioselective bromination of partially fluorinated poly(arylene ether sulfone) multiblock copolymers (PES‐FPES), followed by Ullman coupling reaction with lithium 1,1,2,2‐tetrafluoro‐2‐(1,1,2,2‐tetrafluoro‐2‐iodoethoxy)ethanesulfonate. The PES‐FPES are prepared by aromatic nucleophilic substitution reaction by an original approach, that is, “one pot two reactions synthesis.” The chemical structures of polymers are analyzed by ¹H and ¹⁹F NMR spectroscopy. The resulted ionomers present two distinct glass transitions and α relaxations revealing phase separation between the hydrophilic and the hydrophobic domains. The phase separation is observed at much lower block lengths of ps‐PES‐FPES as compared with the literature. AFM and SANS observations supported the phase separation, the hydrophilic domains are well dispersed but the connectivity to each other depends on the ps‐PES block lengths. The thermomechanical behavior, the water up‐take, and the conductivity of the ps‐PES‐FPES membranes are compared with those of Nafion 117^® and randomly functionalized polysulfone (ps‐PES). Conductivities close or higher to those of Nafion 117^® are obtained. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1941–1956     

Effect of the milling process on the thermal behavior and crystallinity of buckwheat starch

Journal of Thermal Analysis and Calorimetry - Buckwheat starch is an alternative source to supply the high global demand for starch. The properties of starch can be modified through chemical and...     

Identification of metabolic markers in patients with type 2 Diabetes by Ultrafast gas chromatography coupled to electronic nose. A pilot study

Metabolomics is a potential tool for the discovery of new biomarkers in the early diagnosis of diseases. An ultra-fast gas chromatography system equipped to an electronic nose detector (FGC eNose) was used to identify the metabolomic profile of Volatile Organic Compounds (VOCs) in type 2 diabetes (T2D) urine from Mexican population. A cross-sectional, comparative, and clinical study with translational approach was performed. We recruited twenty T2D patients and twenty-one healthy subjects. Urine samples were taken and analyzed by FGC eNose. Eighty-eight compounds were identified through Kovats's indexes. A natural variation of 30% between the metabolites, expressed by study groups, was observed in Principal Component 1 and 2 with a significant difference (p < 0.001). The model, performed through a Canonical Analysis of Principal coordinated (CAP), allowed a correct classification of 84.6% between healthy and T2D patients, with a 15.4% error. The metabolites 2-propenal, 2-propanol, butane- 2,3-dione and 2-methylpropanal, were increased in patients with T2D, and they were strongly correlated with discrimination between clinically healthy people and T2D patients. This study identified metabolites in urine through FGC eNose that can be used as biomarkers in the identification of T2D patients. However, more studies are needed for its implementation in clinical practice.     

Fracture behavior and mechanical,thermal, and rheological properties of biodegradable films extruded by flat die and calender

The development of biodegradable materials for tailored applications, particularly in the field of polymeric films and sheets, is a challenging technological goal as well as a contribution to help protect the environment. Poly(lactic) acid (PLA) is a promising substitute for several oil-based polymers; however, to overcome its thermal and mechanical drawbacks, researchers have developed solutions such as blending PLA with polybutylene adipate terephthalate (PBAT), which is capable of increasing the ductility of the final material. In this study, PLA/PBAT binary blends, with minimum possible content of nonrenewable materials, were examined from processing, thermal, morphological, and rheological perspective. An optimized PLA/PBAT ratio was chosen as the polymeric basis to obtain a biodegradable formulation by adding a biobased plasticizer and appropriate fillers to produce a micrometer film with tailored flexibility and tear resistance. The processing technology involved flat-die extrusion, followed by calendering. The tearing resistance of the produced film was investigated, and the results were compared with literature data. A study on the essential work of fracture was implemented to explore the mode III out-of-plane fracture resistance starting from a trouser tear test.