Ultra-performance liquid chromatography/time-of-flight mass spectrometry based metabolomics of raw and steamed Panax notoginseng

At present, metabolite profiling is of growing importance in herbal medicine fields such as breeding, formulation, quality control and clinical trials. This preliminary study indicated that ultra-performance liquid chromatography/time-of-flight mass spectrometry (UPLC/TOFMS)-based metabolomics allows direct detection of down-stream derivatives of metabolites, arising from the herbal formulation process. This analytical approach allows the discrimination and tentative authentication of unique biomarkers related to different herbal extracts using unsupervised multivariate principal component analysis (PCA). The tentative identification of biomarkers is complemented significantly by the accurate mass measurement of TOFMS and the high resolution and high retention time reproducibility rendered by UPLC. The application of this approach in herbal extract discrimination and ginsenoside biomarker discovery of raw and steamed Panax notoginseng (Burk.) F.H. Chen is demonstrated and discussed.     

Sensitive chemiluminescence aptasensor based on exonuclease-assisted recycling amplification

We report herein an exonuclease-assisted aptamer-based target recycling amplification strategy for sensitive and selective chemiluminescence (CL) determination of adenosine. This aptasensor is based on target-induced release of aptamers from capture probes immobilized on the 96-well plate surface, and thus leading to a decreased hybridization with gold nanoparticle-functionalized reporter sequences followed by a CL signal. The introduction of exonuclease III catalyzes the stepwise removal of mononucleotides from 3′-hydroxyl termini of duplex DNAs of aptamers, liberating the adenosine. Therefore, a single copy of target adenosine can lead to the release and digestion of numerous aptamer strands from the 96-well plates and ultimately an enhanced sensitivity is achieved. Experimental results revealed that the exonuclease-assisted recycling strategy enabled the monitoring of adenosine with wide working ranges and low detection limits (LOD: 0.5 nM). This new CL strategy might create a novel technology for the detection of various targets and could find wide applications in the environmental and biomedical fields.     

Micromechanical Properties of Microstructured Elastomeric Hydrogels

Local, micromechanical environment is known to influence cellular function in heterogeneous hydrogels, and knowledge gained in micromechanics will facilitate the improved design of biomaterials for tissue regeneration. In this study, a system comprising microstructured resilin‐like polypeptide (RLP)–poly(ethylene glycol) (PEG) hydrogels is utilized. The micromechanical properties of RLP‐PEG hydrogels are evaluated with oscillatory shear rheometry, compression dynamic mechanic analysis, small‐strain microindentation, and large‐strain indentation and puncture over a range of different deformation length scales. The measured elastic moduli are consistent with volume averaging models, indicating that volume fraction, not domain size, plays a dominant role in determining the low strain mechanical response. Large‐strain indentation under a confocal microscope enables the visualization of the microstructured hydrogel micromechanical deformation, emphasizing the translation, rotation, and deformation of RLP‐rich domains. The fracture initiation energy results demonstrate that failure of the composite hydrogels is controlled by the RLP‐rich phase, and their independence with domain size suggested that failure initiation is controlled by multiple domains within the strained volume. This approach and findings provide new quantitative insight into the micromechanical response of soft hydrogel composites and highlight the opportunities in employing these methods to understand the physical origins of mechanical properties of soft synthetic and biological materials.     

Precisely Controlled Delivery of Abaloparatide through Injectable Hydrogel to Promote Bone Regeneration

Side‐effects from allograft, limited bone stock, and site morbidity from autograft are the major challenges to traditional bone defect treatments. With the advance of tissue engineering, hydrogel injection therapy is introduced as an alternative treatment. Therapeutic drugs and growth factors can be carried by hydrogels and delivered to patients. Abaloparatide, as an analog of human recombinant parathyroid hormone protein (PTHrp) and an alternative to teriparatide, has been considered as a drug for treating postmenopausal osteoporosis since 2017. Since only limited cases of receiving abaloparatide with polymeric scaffolds have been reported, the effects of abaloparatide on pre‐osteoblast MC3T3‐E1 are investigated in this study. It is found that in vitro abaloparatide treatment can promote pre‐osteoblast MC3T3‐E1 cells’ viability, differentiation, and mineralization significantly. For the drug delivery system, 3D porous structure of the methacrylated gelatin (GelMA) hydrogel is found effective for prolonging the release of abaloparatide (more than 10 days). Therefore, injectable photo‐crosslinked GelMA hydrogel is used in this study to prolong the release of abaloparatide and to promote healing of defected bones in rats. Overall, data collected in this study show no contradiction and imply that Abaloparatide‐loaded GelMA hydrogel is effective in stimulating bone regeneration.     

Synthesis, electrochemistry and metal binding properties of monosubstituted ferrocenoyl peptides with thioether-containing sidechains

Ferrocenoyl peptides incorporating thioether functionality respond more strongly to mercury(II) than to other heavy metal ions in solution. Compounds reported previously in this context are all 1,1′-disubstituted, and all include two or more sulfur-containing amino acids. To test whether two thioether groups are required for effective mercury binding by these systems, we have prepared a series of singly-substituted ferrocenoyl peptides from ferrocenecarboxylic acid and l-methionine, S-methyl-l-cysteine or S-trityl-l-cysteine, and tested them as electrochemical probes for mercury(II). Nine ferrocenoyl peptides have been synthesised using a Boc-protecting group strategy and HBTU-mediated peptide coupling. The electrochemical properties of these compounds have been determined using cyclic voltammetry, and all show fully reversible one electron oxidation steps. Forward sweep half wave peaks (E_F), reverse sweep half wave peaks (E_R), peak separations (ΔE_P) and half wave potentials (E_1/2) are reported. Changes in the potential of the iron(II)/iron(III) redox couple of the ferrocene core have been used to quantify heavy metal-peptide interactions, revealing that these monotopic systems also respond more strongly to mercury(II) than to zinc(II), cadmium(II), silver(I) and lead(II). NMR experiments to characterise the peptide-mercury interaction implicate the thioether sulfur as the site of mercury binding and indicate 1:1 stoichiometry. The crystal structure of ferrocenoyl-S-methyl-l-cysteine methyl ester is also reported. The greater responsiveness of these systems to mercury(II) makes them interesting leads for the development of biologically inspired sensors for this toxic heavy metal.     

Bruceines K and L from the Ripe Fruits of Brucea javanica

Bruceine K ( 1 ), a pentacyclic C₂₀‐quassinoid bearing a unique 12,20‐epoxy moiety, and bruceine L ( 2 ), along with the ten known compounds (6S,7E)‐6,9,10‐trihydroxy‐ and (6S,7E)‐6,9‐dihydroxymegastigma‐4,7‐dien‐3‐one ( 3 and 4 , resp.), cleomiscosins A–C, luteoline, quercetine, bruceantinol, pinoresinol, and thevetiaflavone, were isolated from the ripe fruits of Brucea javanica. Bruceines K ( 1 ) and L ( 2 ) were determined to be (1β,2α,11β,12β,14ξ,15β)‐12,20‐epoxy‐1,2,11,13,14,15‐hexahydroxypicras‐3‐en‐16‐one and (1β,2α,11β,12β,15β)‐13,20‐epoxy‐1,2,11,12‐tetrahydroxy‐16‐oxo‐15‐(senecioyloxy)picras‐3‐en‐21‐oic acid methyl ester (senecioic acid=3‐methylbut‐2‐enoic acid), respectively, on the basis of NMR (¹H‐ and ¹³C‐NMR, DEPT, ¹H,¹H‐COSY, NOESY, HMQC, and HMBC) and ESI‐MS data. Among the known compounds, (6S,7E)‐6,9,10‐trihydroxy‐ and (6S,7E)‐6,9‐dihydroxymegastigma‐4,7‐dien‐3‐one ( 3 and 4 , resp.), cleomiscosin C, luteoline, quercetine, and thevetiaflavone were isolated for the first time from the Brucea plants.     

Analysis of organic acids and inorganic anions in beverage drinks by capillary electrophoresis

To meet the need for a new and validated analytical method for simultaneous determination of inorganic and organic acid anions in beverage drinks, a capillary zone electrophoresis (CZE) procedure had been developed based on a new background electrolyte (BGE) system containing 3 mmol/L 1,3,5-benzenetricarboxylic acid (BTA), 15 mmol/L tris(hydroxymethyl)aminomethane and 1.5 mmol/L tetraethylenepentamine (TEPA) at pH 8.4. Baseline separation of anions commonly found in beverage drinks could be achieved in less than 14 min with indirect UV detection at 240 nm. Comigration problems for hydroxycarboxylic acids could be solved using TEPA as BGE additive. The results indicate excellent repeatability for migration time (RSD, 0.27-0.67%, n = 5) and good precision for both peak height (RSD, 3.2-4.2%, n = 5) and peak area (RSD, 3.1-4.5%, n = 5). Under the optimized conditions and using corrected peak area for quantitation, an excellent linear dynamic range (with correlation coefficient > 0.997 in a concentration range from 0.005 to 2.0 mmol/L) and low detection limit (1-4 micro mol/L) were obtained for all the anions investigated. The applicability and reliability of the CE procedure developed were established by parallel method determination using established ion chromatography procedure for the analysis of inorganic and organic acid anions in orange juice and wine samples. Our CZE procedure provided a sensitive and economic technique for simultaneous determination of inorganic and organic acid anions in orange juice, red and white wine samples.     

Theoretical studies on the metathesis processes, (Tp(PH3)MR(eta 2-H[bond]CH3)]-->[Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe,Ru, and Os; R=H and CH3)

Theoretical calculations on the metathesis process, [Tp(PH3)MR(eta 2-H[bond]CH3)] --> [Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe, Ru, and Os; R=H and CH3), have been systematically carried out to study their detailed reaction mechanisms. Other than the one-step mechanism via a four-center transition state and the two-step mechanism through an oxidative addition/reductive elimination pathway, a new one-step mechanism, with a transition state formed under oxidative addition, has been found. Based on the intrinsic reaction coordinate calculations, we found that the trajectories of the transferring hydrogen atom in the metathesis processes studied are similar to each other regardless of the nature of reaction mechanisms.     

Ethynylated N-phenylbenzimidazoles: Synthesis and thermal properties

Three diethynylated bisbenzimidazole prepolymers were synthesized and their polymerization characteristics examined. N-phenyl-substituted diethynylated bisbenzimidazoles melted between 250 and 265°C and had gel times of several seconds to several minutes. In contrast, an N-phenoxyphenyl diethynylated bisbenzimidazole melted at a temperature sufficiently low (ca. 150°C) to provide a 5-min gel time at 170°C and a 4-min gel time at 210°C. This material showed promise as a potential laminating resin and a brief screening of the prepolymer for this application was carried out. The polymers of both N-phenyl- and N-phenoxyphenyl-substituted diethynylated bisbenzimidazoles showed apparent degradation temperatures of 500°C or greater when examined by thermogravimetric analysis.     

Spectrophotometric method for the determination of sorbic acid in various food samples with iron(III) and 2-thiobarbituric acid as reagents

A simple, rapid and accurate spectrophotometric method has been developed for the determination of sorbic acid in various food samples based on the oxidation of sorbic acid by iron(III) at 100 degrees C to malonaldehyde, which then reacts with 2-thiobarbituric acid to form a reddish brown product. The optimum experimental conditions for colour development have been assessed. Absorbance measurements were made at 529 nm in the presence of 0.4% m/V citric acid. The calibration graph was linear for 0-6 micrograms ml-1 of sorbic acid with a slope of 0.131 A micrograms-1 ml. The recoveries of sorbic acid at concentrations of 164-557 micrograms ml-1 ranged from 96 to 103%. The relative standard deviations of ten replicate determinations of sorbic acid in a synthetic cream soda sample spiked with 573 micrograms ml-1 of sorbic acid and in an onion juice sample containing 82 micrograms ml-1 of sorbic acid were 1.6 and 1.9%, respectively. Interferences from several common food additives can be minimised by extracting sorbic acid with diethyl ether and then back-extracting the acid with sodium hydrogen carbonate. The method has been applied successfully to the determination of sorbic acid in a wide range of food samples including beverages, cake, cake mate, garlic bread sprinkle, onion juice, oyster flavoured sauce and grenadine syrup.